Schedule Annual Maintenance
Geno started working at American Waterworks in November of 2019. He worked in masonry for nine years and in electrical, plumbing, and framing for three years, all of which play a huge role in his job here. His day to day on the job consists of a variety of construction and destruction with his crew, and working together as a team at every job site. As a radon Foreman, his main role is installing our radon mitigation systems in customers' homes. His favorite part about working for American Waterworks is completing each and every job at the best of his ability and driving throughout the countryside.
In Geno's spare time, he likes to take long walks in the woods and spend quality time with his family. We are excited to introduce Geno as part of our production team at American Waterworks!
Shoutout to our crew of Geno and Dakota for installing our Radon Mitigation System for one of our customers... Watch Video »
Steven and Linda T. of Holmen, WI had water leaking into their basement from their walls. They had American Waterworks do work on their home before, so they worked with us again. Our Foremen, Dakota and Geno, installed our Basement to Beautiful Wall Panels along the wall and re-applied concrete over the interior drainage system. Our Basement to Beautiful Panels is advanced foam insulation that helps with energy savings and gives the basement a neat, clean appearance.
Steven and Linda were happy with the work and their peace of mind was restored!
We provide FREE estimates for all of our services. Click here to schedule your FREE inspection today.
Tim W. of Cresco, IA had a radon level of 10, so he tested it again, but this time it was at 18. He became nervous and didn't enjoy living somewhere with that type of air quality. He found American Waterworks on his local television, so he called the office line and scheduled a time for our Design Specialist, Michel, to go to his home and figure out where to install our Radon Mitigation System. Michel proposed installing it in the attic. Tim was confident in the proposal and got all of his questions answered, so he went ahead with the project.
Our Foreman, Geno, and his crew started the installation by drilling a hole in the concrete floor in the basement, forming a suction point. From there, our team installed and connected PVC pipes until they got to the attic, where they installed the system. The purpose of our mitigation system is to pull radon from beneath the ground and lead it out of the home. If the mitigation system isn't working, then no radon can escape the home. Tim had a good experience and he was grateful we were able to help him!
Are your radon levels high or are you interested in getting your home tested? Give us a call today to learn more!
A homeowner in Rochester, MN had high radon levels in their home, and our radon crew at American Waterworks was able to reduce their levels dramatically by installing our exterior standard radon mitigation system. The homeowner was absolutely thrilled with the work and was grateful that they were no longer breathing in unhealthy air.
Gary O. of Austin, MN got his house tested for radon three times, and each test result came back with 5 pCi/L, which is higher than the danger level. He found American Waterworks online, so he did some research on our website and called our office line to schedule a FREE estimate. Our Design Specialist went to Gary's home, answered all of his questions, and drew up a plan for where to install our Radon Mitigation System. Gary was confident in Michel's proposal and our map lay-out, so he followed through with the project and got a date scheduled for the installation.
Our Foreman, Geno, and his crew member, Dakota, began the process by introducing themselves to Gary and his wife and ensured all of their questions were answered. After a clear introduction, our crew got to work and drilled a hole in the basement concrete floor to form a suction point. Next, our team connected PVC piping from the suction point up through the second floor to the attic, where our team installed the Radon Mitigation System. From the system, our crew formed a hole in the ceiling of the attic, leading to the roof, where the radon was able to escape the home. Gary said he had a great experience and provided a testimonial, where you can view HERE!
Aaron G. of Mason City, IA was interested in radon mitigation, so he did his research and found American Waterworks. Our Design Specialist went to Aaron's home, inspected the layout of his house, and came up with a plan to install the mitigation system. Aaron was confident in our plan so he signed our contract and determined a date for the installation.
Our Foreman and his crew member started the process by drilling a hole in the concrete floor of the basement, which serves as the suction point. Next, from the floor, our crew connected PVC piping until they got to outside of the home where they installed the mitigation system and its cover. The cover serves as protection and hides the mitigation system. If the mitigation system is not working correctly, then radon is not able to make its way out of the home. From the system, our crew installed more PCV piping alongside the siding until it got to the roof. Aaron was happy with the work that was done and had a great experience!
Robert M. of Hanlontown, IA had water moisture problems in his crawl space, making him feel nervous about his home repair needs. After being referred by one of his peers, he called American Waterworks to schedule a FREE Estimate with our Design Specialist, Reed Hudson. Reed went to his home to inspect his crawl space and come up with a solution. After an in-depth diagnosis, Robert felt comfortable with the proposal, so he went ahead with the project.
Our Foreman, Geno Mclain, and his production team installed 200 feet of CleanSpace Encapsulation which is made to transform the crawl space into a dry, clean, and energy-efficient part of the home and removes all standing water sources. Next, they applied 55 feet of CleanSpace Wall System around the wall perimeter, which is made to prevent mold or humidity build-up. Robert was thrilled with the work and loved the neat and clean appearance!
Robert K. of Albert Lea, MN got his home tested for radon and his levels came back at 19.5 pCi/L. The Environmental Protection Agency requests that homes with above 4 pCi/L must take action right away. So, Robert did, and he called American Waterworks to set up an appointment after finding out we provide services for Radon Mitigation. Our Design Specialist, Michel, went to Robert's home and drew up a map and plan to install our Radon Mitigation System. Robert was confident in the price and product, so he went ahead with the installation.
Our Foreman, Geno, and his crew member started the installation by drilling a hole in the basement concrete floor, forming a suction point. The purpose of doing this is to pull radon out from underneath the home. From there, our team connected PVC piping until they got to the house exterior, where they installed the Radon Mitigation System. The system is the heart of the system. If the system isn't working, then radon is not escaping from the home. From there system, our team connected PVC piping along the siding of the home until they got to the roof, which is where radon escapes into the open air. Robert said our team was clean, they explained everything well, and they were very professional!
Give us a call today to test your radon levels and to install our Radon Mitigation System!
Annetta A. of Scandia, MN wanted to have a sump pump that came with a battery backup. She found American Waterworks so she got in contact with our office staff to gather some information about our sump pump systems. Annetta had a great conversation, so she scheduled a FREE estimate with our Design Specialist, Shane. Shane proposed a bid and answered all of Annetta's questions. She was confident in the solution, so she moved forward with the project.
Our Foreman, Geno, and his crew broke out the concrete around the existing sump pump and replaced it with our TripleSafe Sump Pump System, which is the best sump pump we provide for customers because of its triple protection, ability to solve all three water problems in one unit, and its battery backup kicks on when there's a power outage. Annetta was happy with the project and was glad she got this taken care of!
Kyle W. of Minneapolis, MN had a radon level of 4.1 pCi/L. According to the Environmental Protection Agency, 4 pCi/L is the "action level", which means that it needs to be mitigated as soon as possible. Kyle found American Waterworks on HomeAdvisor, so he contacted our office staff and set up a day to get one of our Exterior Radon Mitigation Systems installed. Our Design Specialist, Michel, went to Kyle's home, inspected the exterior of his house, and designed a detailed plan for where to install the system as well as the cost. Kyle was confident in the quote and the design, so he went ahead with the project.
Our Foremen, Dakota and Geno, installed the system from the inside utility room to the house exterior. The purpose of the mitigation system is to pull radon from underneath the home and expose it into the open air outside of the home. The installation only took a few hours and Kyle was very happy with the work that was completed.
Alex F. of Minneapolis, MN wanted to get a radon mitigation system installed because his test came back with 6.9 pCi/L. He did his research and found American Waterworks on HomeAdvisor. He got our radon mitigation system installed by our Foreman, Dakota, and his crew member, Geno. Dakota started the installation in the utility room to the garage and through the roof, where the radon was able to escape into the open air. The purpose of our radon mitigation system is to expose radon out of the house. It can be installed in several different locations on the property depending on the basement, crawl space, or concrete slab.
A homeowner in Minneapolis, MN had high radon levels and they wanted to get a radon mitigation system installed. Our crew of Dakota and Geno installed the system starting in the utility room, to the closet (as shown), to the garage, and through the roof. The purpose of the system is to pull radon from underneath the ground and guiding it through the home to the outside of the home so it can escape into the open air. The homeowner was very impressed with the project and their peace of mind is restored knowing that they will breathe safe air!
We provide FREE estimates for all of our services. Give us a call today to request and schedule your appointment!
Terri S. of Minnetonka, MN wanted to get a Radon Mitigation System installed in their home. Our Foreman, Geno Mclain, and his crew member started the installation from the basement utility room to the outside of the home, where they installed the system. The mitigation system is the heart of the system; if it isn't working, radon will not be able to escape the home. Terri was very happy with the installation and the radon levels in her home dropped dramatically.
Collin M. of Saint Michael, MN wanted to get a Radon Mitigation System installed, so he researched contractors on Angi's List. He came across American Waterworks and scheduled a FREE estimate with our Design Specialist, Jesse. Jesse went to Collin's house, inspected the home, wrote out a quote, and answered all of Collin's questions. Collin was confident in Jesse's proposal, so he went ahead with the project.
Our Foreman, Geno, and his crew installed our Radon Mitigation System outside of the home from the utility room. This system is designed to pull radon from the house and expel it outside of the home into the open air. The installation only took a few hours and Collin's radon levels dropped tremendously.
Are you interested in radon mitigation? No problem -- give us a call today to schedule your appointment!
Jennifer S. of Dassel, MN had a wet, damp, and musty crawl space, causing problems such as mold, wood rot, and water moisture, and her friend referred American Waterworks for the repairs. She called our office and set up a FREE Estimate with our Design Specialist, Michel Ramirez. Michel went to his home, carefully inspected the crawl space, and drew up a solution that worked for her and her budget. She was confident with Michel's proposal and got all of her questions answered, so she signed the proposal and moved forward with the project.
Our Foreman, Geno Mclain, and his crew member began the installation by cleaning out the crawl space and starting from the back of the crawl space to the front. Our team installed 896 square feet of our CleanSpace Encapsulation Moisture Barrier, which is a durable, white liner that prevents water vapor and humidity from invading the crawl space. Along with the prevention of mold and rot, a dry, clean crawl space keeps away odors and prevents the heat and cold from entering during the winter and summer seasons. The project took one and a half days, and Jennifer was pleased with the work that was completed!
Are you experiencing problems like this in your crawl space? Call us today or click HERE to request your free estimate!
Randy N., a resident of Willmar, MN, got his radon levels tested and the result came out to be 6.8 pCi/L. Our Design Specialist, Kevin, set him up with an installation date and walked him through a plan of our Radon Mitigation System. These systems are made to pull radon from within the home and release it outside through pipes.
Our crew of Dakota and Geno began the installation by drilling a hole into the basement concrete floor, creating a suction point. From there, our crew installed a PVC pipe from the whole, which created a vent for the radon gas. They connected the pipe to the radon fan outside of the home (which is the Mitigation System itself). The fan is the heart of the system. If it fails, the radon will remain in the home. From the fan, our team connected more PVC piping along the siding of the home until it reached open air above the roof. To complete the installation, Geno and Dakota performed a final walkthrough with Randy and ensured all of his questions were answered.
Are you interested in our radon services? Call us today or click HERE to request a free, no-obligation estimate to get your home tested for radon!
Daniel K. of Remer, MN had a damp crawl space, causing him to worry about mold, mildew, and humidity problems. He did some research on HomeAdvisor and came across American Waterworks, where he saw one of our photo gallery projects. He liked what he saw, so he gave our office a call and scheduled a FREE Estimate with our Design Specialist, Jesse. Jesse went to his home to examine the project and draw up a solution. Daniel was confident in Jesse's proposal of our CleanSpace Encapsulation Vapor Barrier, so he went ahead with the project and scheduled an installation date.
Our Foreman, Geno, and his crew member, Dakota, installed 405 square feet of our CleanSpace to encapsulate the crawl space, which is a water protectant barrier that saves energy costs and prevents mold or humidity. The homeowner was happy with the work that was completed and had a great experience with our team.
Not only do we provide work in crawl space waterproofing, but we also perform services in basement waterproofing, foundation repair, concrete repair/lifting, and radon testing/mitigation. Call us today or click HERE to schedule a free estimate!
Andrew W. of Raymond, MN got his home tested for radon and his radon levels came back between 11 and 16 pCi/L. He wanted to get a quote for a Radon Mitigation System installed in his home, so he contacted American Waterworks and scheduled a FREE estimate with our Design Specialist, Jesse Williams. Jesse went to Andrew's home, drew out a plan for where the system should be installed, and determined the price of the system. After a thorough discussion, Andrew felt confident in Jesse's plan, so he moved forward with the project and got a date scheduled for the installation.
Our Foreman, Geno Mclain, and his crew installed PVC piping from the basement, up, until they got to the outside of the home. At that point, they installed our Radon Mitigation System, which is the heart of the system. If the system isn't working, then radon is not being pulled from within the home. Each system is different depending on the structure of the home, which is something that the Design Specialist will discuss with the homeowner. Andrew was happy with the installation and had a great experience with our crew.
At American Waterworks, we perform services for radon mitigation/testing, basement waterproofing, foundation repair, crawl space repair/encapsulation, and concrete repair/lifting. Give us a call today or click HERE to request and schedule your FREE estimate!
our service area