Your Leading Winneshiek County, IA Wet Basement & Structural Repair Company

Bridget C. in Ossian, IA was trying to sell her home that she had lived in for 25 years. The buyer was concerned about a cracked wall in the garage and wanted to have it inspected. Bridget’s realtor got her in touch with American Waterworks to help with her foundation problem. One of our Design Specialists, Rick Weber, went onsite to give her a FREE inspection and design a solution. Rick recommended that she have us install PowerBraces along the damaged wall to permanently stabilize it. Bridget and the buyer agreed to have the project completed, so they scheduled the installation.

Our production team installed the four PowerBraces in the garage and left the homeowner with a tightening kit to continue straightening the wall over time. Our foundation repair systems are backed by a lifetime warranty, so she is confident in their decision to go with American Waterworks. The homeowner is pleased with the results and she is glad her foundation wall in now secure.

A movie theater in Decorah, IA noticed that they had a crack in their foundation. They got in touch with a local engineer, and the engineer recommended that they contact American Waterworks. Brad R. contacted us to receive a FREE estimate, so we sent out our Commercial Sales Specialist, Tom Webbles, to inspect their foundation and design a solution. Tom recommended that we install piers to lift the foundation and transfer its weight to the pier instead of the soil. Brad liked the proposal that Tom put together, so he decided to move forward with the installation.

Our production crew started the installation process by removing the concrete and soil where they needed to install the piers. They drilled seven helical piers deep into the soil underneath the foundation of the movie theater. Once the piers reached stable soil, the foundation was raised and there was no longer a crack. They also sealed the cracks with concrete to ensure that water could not seep through. Our foundation repair solutions are guaranteed for a lifetime, so Brad is confident that he chose the right solution to protect the movie theater for the long-term.

Noland H. in Calmar, IA was suffering from water seeping into his unfinished basement. He had set a goal to finish the basement of his farm home, but before he could do that, he knew he needed to have his basement waterproofed. Water was seeping through the soil and the limestone foundation. His neighbors had recommended contacting American Waterworks, so he called us to receive a FREE estimate. One of our Design Specialists went to his home to inspect his basement and develop the right solution. After meeting with our Specialists and learning more about our waterproofing system, he chose to move forward with the installation.

Our production team installed a full perimeter of our WaterGuard drainage system, a TripleSafe sump pump, and our CleanSpace vapor barrier along the basement walls. The installation took only two days to complete, and now Noland’s peace of mind has been restored. He is confident that his basement will remain a dry, healthier space and he is ready to start the renovation!

Todd Teslow in Ridgeway, IA had water seeping into his basement between the cracks where the wall met the floor. He was left with a mess after each heavy rainfall and he decided that he needed to call American Waterworks. He had previously met one of our Design Specialists at a local home show and was impressed with our company, so he scheduled a free estimate. Our Design Specialist, Mac Cole, created a well thought out plan to waterproof his basement with WaterGuard and a TripleSafe sump pump.

Our crew started the installation by removing the concrete around the perimeter of the basement floor and laying our WaterGuard drainage system. They also installed a TripleSafe sump pump in the corner of the basement and connected it to the drainage system. They filled back the gaps in the floor with rock and then replaced the concrete. Water is now properly guided through the WaterGuard, into the sump pump, and then discharged from the home. Todd is now enjoying a dry, healthier basement!

For more information regarding our waterproofing system, click here!

This homeowner in Fort Atkinson, IA had three foundation walls in his basement that were cracked and bowing inward. He contacted us to receive a free estimate, so we sent one of our Design Specialists to his home to inspect his foundation and develop a proper solution. Our Specialist recommended having wall anchors installed to stabilize the walls and the homeowner agreed, so he scheduled the installation.

Our production crew drilled small holes through the unstable foundation walls, and inserted long, metal rods through the walls and into the soil surrounding the home. They secured both ends of the rods with anchor plates and tightened them as far as they could go. In total, our crew installed 22 wall anchors along his three damaged foundation walls. The anchors provide permanent stability and help to straighten the wall over time.

Residents of Castalia, IA had water leaking into their basement, causing them to worry about the value of their home. They scheduled a FREE estimate with our company after hearing about our business. Our Design Specialist went to their home, thoroughly and carefully inspected their basement problems, and proposed a solution that would solve their problem and restore their peace of mind. They were comfortable and confident in our Design Specialist and our products, so they signed the proposal, put down a deposit, and went ahead with the project. 

Is water leaking into your basement? We can help you with that! Give us a call today to schedule your FREE inspection.

A female homeowner in Castalia, IA wanted to get an interior drainage system installed in her home to prevent water from leaking into her basement. She worked with American Waterworks for the project, and our crew installed our WaterGuard Below Floor Drain in her basement to solve the problem. This system is the best and most common interior drain that we provide for homeowners because of its easily-accessible service ports, its ability to collect water seepage from basement walls, and its prevention of mud clogs. The female homeowner was happy with the installation and could tell the difference right away! 

Give us a call today to learn about why interior drainage systems are more beneficial than exterior drainage systems and schedule your FREE estimate.

Homeowners in Castalia, IA were in need of a new sump pump. American Waterworks was the recommended company to work with so they got in contact with us to set something up. Our team installed our TripleSafe Sump Pump System, which is the best sump pump that we provide for homeowners because it solves all three water problems in one system and comes with a battery backup in case of a power outage. The homeowners were very happy with the installation and were looking forward to hearing the pump kick on during the next rainstorm! 

We offer FREE, on-site inspections for all of our services. Give us a call today to schedule yours now.

A homeowner in Ossian, IA was concerned about his basement space when he had recently been in the space and noticed a large amount of water had made its way into the basement. He didn't know what to do next, but knew it was most likely better to take action than let it sit and cause further damage. When he went online to find basement waterproofing solutions, he found the American Waterworks name. He became interested in our FREE no-obligation estimate services and signed up for his own. When we received his request, we sent over Design Specialist Dustin Amenda to take a closer look at the areas of concern and give his expert recommendations. Dustin informed the homeowner that in order to stop the water intake and prevent future water-related issues in the basement, a new sump pump and drainage system should be installed. The homeowner trusted Dustin's judgment and agreed to the suggested products and plan. When our Foreman, Jeremiah Fischer, and his crew arrived at the site, they began the project by jackhammering channels along the perimeter of the basement. Next, they filled the channels with drainage stone, our WaterGuard drain system, and more clean stone. They also installed a new SuperSump Plus pump and a feed line was connected from the drain system to the pump so the incoming water would be safely taken up and out of the home. To finish the project, the crew layered concrete around the areas to keep the newly installed products in place and protect them. The homeowner was glad to have a water-free basement back and relieved that he didn't let the problem get worse.

Now's the time to get your basement waterproofed! We'll get you set up with a FREE estimate learn more about our products and services.

 A homeowner in Decorah, IA, tripped walking into their home one evening. After some investigating, the homeowner noticed several of their slabs were uneven and crooked. Worried someone would be injured, the homeowners knew they needed to find a solution to their tripping issue. Hoping to avoid total concrete replacement, the homeowner began looking into concrete lifting and leveling services near them. The homeowner looked into "concrete leveling near Decorah, IA" and American Waterworks stood at the top of the list. After seeing our 4.9/5 star rating on Google, the homeowner knew we were the best company for them. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Brad, to take a look at the affected concrete. Brad arrived at the home and began by taking a close look at the driveway and walkway leading to the home. Following his detailed inspection, Brad determined the sidewalk and driveway were sinking due to soil settlement. To stop the sinking from continuing, Brad suggested filling the void and lifting the sidewalk and driveway back to its original level. The homeowner considered all their options but ultimately decided this was the best plan. Once the homeowner approved, Brad passed the plans to Logistics to build the project. As soon as the project was built, it was assigned to our Foreman, Jordan, and his crew to begin. Jordan and his crew traveled to the home and began the project by lifting the sinking sidewalk and driveway with PolyLevel. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro Sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the driveway and sidewalk were lifted and repaired, the crew cleaned up their materials and left the home. The homeowner was thankful and impressed with the work completed by Jordan and his crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Decorah, IA, was driving their car into their garage when they realized they could not get the car over the drop. Worried the issue would worsen, the homeowner knew they needed to find a professional that would solve the issue. The homeowner asked a local Facebook group for any recommendations and several members recommended working with us, American Waterworks. Convinced to give us a chance, the homeowner signed up for their FREE estimate. Once the estimate was set, we sent Aidan, one of our Design Specialists, to the home to perform the estimate. Aidan completed the detailed inspection and found that the sidewalk was settling and sinking into the ground. To stop the sinking from continuing, Aidan recommended lifting the driveway with PolyLevel. The homeowner agreed with Aidan's proposal and the plans were sent to the office to be approved. Once the office approved the plans, they assigned them to our Foreman, Dylon, and his crew. Dylon and his crew traveled to the home and began the PolyLevel installation. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. After the driveway was lifted to its original level, the crew cleaned up their materials and left the home. The homeowner was in awe of the PolyLevel installation process and the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Calmar, IA, was inspecting their equipment when they realized it was time for their annual maintenance appointment. The homeowner reached out to our Service team and scheduled their annual maintenance appointment with our Service Technician, Clay. Once the appointment was finalized, Clay traveled to the home and began the thorough inspection of the preinstalled products. While inspecting the products, the homeowner asked if Clay could take a closer look at the crawl space in their home. After inspecting their crawl space, Clay determined it needed to be properly encapsulated. Clay drew up a solution that would solve the homeowner's issue, and they agreed. Once they were given the stamp of approval, Clay sent the plans to our office for approval. Next, the finalized plans were assigned to our Foreman, Arturo, and his crew to begin the project. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. Once the products were installed, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Highlandville, IA, noticed slight cracks throughout their walls. Worried this could lead to bigger issues, the homeowner knew they needed to find a permanent solution. After looking at several companies, the homeowner's eye was caught by our high ratings and reviews. Knowing we would provide the best service, the homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists to the home to take a closer look. The Design Specialist arrived and began inspecting the basement walls. During the inspection, the Design Specialist confirmed the basement walls needed to be permanently stabilized. The Design Specialist was able to come up with a recommended plan of action that would solve the cracked issues. After hearing the proposal, the homeowner agreed. Next, the Design Specialist sent the plans to our office for approval. Our Logistics team built and scheduled the project, then it was sent to our Foreman, Raul, and his crew. As soon as Raul and his crew arrived, they began the CarbonArmor installation. CarbonArmor is a wall reinforcing system that is a state-of-the-art solution used to fix cracked and bowing foundation walls. CarbonArmor strips utilize epoxy and carbon fiber strips to strengthen and stabilize foundation walls that are cracked or bowed. To install the CarbonArmor strips, the crew begins by cleaning the wall to ensure good adhesion. Then, the technician masks off each carbon fiber strip location and saturates the masonry with epoxy. The CarbonArmor reinforcement becomes part of the wall structure. After the CarbonArmor was successfully installed, the crew cleaned up their material and left the home. The homeowner was relieved to know their walls were sturdy and secure. If you are experiencing a similar issue, sign up for your FREE estimate today!

A homeowner in Calmar, IA, found damp spots throughout their dated basement. Worried about the long-term effects, the homeowner began looking into "waterproofing repair near Calmar, IA". One of the first companies to catch their eye was us, American Waterworks, so the homeowner inspected the services that we offer. The homeowner was impressed with our high ratings and reviews, so they decided to call our Appointment Center and sign up for their FREE estimate. Once the estimate details were finalized, the homeowner prepared for the arrival of Brady, one of our Design Specialists. Brady traveled to the home and began his thorough investigation of the basement. During his inspection, Brady determined the entire basement space needed to be waterproofed. After drafting a proposal, Brady presented his plans to the homeowner. After some deliberation, the homeowner knew this was their best option. Next, Brady passed the plans along to our office to approve the final plans. After our Logistics team scheduled and built the project, they assigned our Foreman, Matt, and his crew to the project. Matt and his crew traveled to the home and began the installation. First, Matt and his crew began by installing WaterGuard around the basement perimeter. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew installed a feedline across the floor to connect the SuperSump+ to the new WaterGuard. Next, the crew shifted their focus to installing CleanSpace on the unfinished basement walls. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. Finally, Matt and his crew wrapped up by installing an Aprilaire in the basement. An Aprilaire is a high-capacity solution that can help you achieve complete comfort through humidity control. As soon as all the products were installed, the crew cleaned up their materials and left the home. The homeowner was relieved to see their basement was secured from possible flooding. If you are suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Decorah, IA, noticed there was water leaking from their basement walls. Uncertain where the water was coming from, the homeowner knew they needed to find a proper solution. Knowing they could not complete the project themselves, the homeowner began looking for "leaky basement wall repair near me". After comparing several companies, the homeowner decided to work with us, American Waterworks. Impressed with our ratings and reviews, the homeowner knew we were the ideal company for the project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. After the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Ryan. Once he arrived, Ryan began a thorough inspection of the basement and foundation. While inspecting the basement, Ryan found that the west wall was suffering the most from water intrusion. To stop the leaking water, Ryan recommended waterproofing along that wall. Ryan presented his proposal, the homeowner knew it was their best plan of action. Next, Ryan sent the plans to our Logistics team to finalize and schedule the project. Our Logistics team gave their stamp of approval, then the proposal was scheduled for the following month. The project date arrived, and then our Foreman, Juan, and his crew traveled to the home to begin the installation. First, Juan and his crew started by installing WaterGuard along the west wall. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to attaching CleanSpace to the unfinished basement wall. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. As soon as all the products were secured, the crew cleaned up their materials and left the home. The homeowner was in awe of the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today!

A homeowner in Castalia, IA, was cleaning their basement when they noticed small puddles near their foundation walls. Alarmed by this discovery, the homeowner knew they needed to find an expert solution. Unsure who to work with, the homeowner decided to find the top-rated waterproofing basement company in the area. One of the first companies to catch their eye was us, American Waterworks. Impressed with our ratings and services, the homeowner decided to sign up for their FREE estimate with us. Once the estimate was set, the homeowner awaited the arrival of Brady, one of our Design Specialists. Brady promptly arrived at the home and began his thorough inspection of the basement. During his detailed investigation, Brady found several areas where water was sneaking into the home. To stop the water intrusion from continuing, Brady recommended installing WaterGuard and replacing the sump pump. The homeowner agreed with Brady’s recommendations, so he passed the proposal to our Logistics team. After the Logistics team approved the plans, they scheduled the project with our Foreman, Matt, and his crew for the next month. The project date arrived, so Matt and his crew traveled to the home to begin the project. As soon as Matt and his team arrived, they began the installation. First, Matt and his team began by installing WaterGuard along the basement perimeter. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the TripleSafe. The crew installed a feedline across the floor to connect the TripleSafe to the new WaterGuard. After the TripleSafe was secured, the crew cleaned up their materials and left the home. The homeowner was relieved to know their water intrusion threat was eliminated. If you are experiencing a similar issue, sign up for your FREE estimate today!

A homeowner in Fort Atkinson, IA, noticed their sidewalk was heaving considerably. Concerned this would become a major tripping hazard, the homeowner went to Google and searched for "concrete lifting company near me".  At the top of the list with 5 stars was us, American Waterworks, so the homeowner decided to take a closer look at our services. Once they saw our impressive concrete before and after photos, the homeowner knew we were the ideal company for their project. Next, the homeowner called our Appointment Center and scheduled their FREE estimate. Once the estimate was set, we sent one of our Design Specialists to take a closer look. The Design Specialist traveled to Fort Atkinson and began their detailed inspection of the uneven concrete. During his detailed inspection, the Design Specialist discovered the sidewalk was sinking due to settlement. To prevent the sidewalk from sinking further, the Design Specialist recommended inserting PolyLevel underneath the sinking concrete. After considering all their options, the homeowner knew this was the best plan of action. The Design Specialist passed the project details to our Logistics team to build and schedule the project. After the project was built, our Logistics team scheduled it for the following weeks. Once the project date arrived, our PolyLevel crew traveled to Fort Atkinson to begin the PolyLevel installation. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the products were properly installed, the crew cleaned up their materials and left the home. The homeowner was happy to know their sidewalk was no longer a tripping hazard. If you are experiencing a similar issue, sign up for your FREE estimate today!

A homeowner in Ossian, IA, tripped walking into their home one evening. Concerned this could become a serious issue, the homeowner began looking into "concrete leveling services near Ossian, IA". One of the first companies to populate was us, American Waterworks. After taking a closer look at our award-winning concrete lifting and leveling services, the homeowner knew we were the perfect company for their project. Since they were already on our website, the homeowner signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Brad. Next, Brad traveled to the home to begin the estimate. Brad promptly arrived and started his thorough inspection of the concrete. After taking a closer look, Brad noticed their concrete was sinking into the ground, which caused the heave. To prevent the heave from continuing, Brad recommended using PolyLevel. After hearing about the benefits of PolyLevel, the homeowner knew this was their best plan of action. Once the homeowner gave the green light, Brad passed the plans along to our Logistics team to schedule. Our Logistics team built and scheduled the project for a few weeks later. Once the project date arrived, our crew was sent to the home to begin the PolyLevel installation. After they arrived, they made sure the concrete was ready for the PolyLevel installation. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. After the PolyLevel installation was complete, the crew cleaned up their materials and left the home. The homeowner was in awe of the excellent work completed, so they left a kind review. If you notice your driveway apron is sinking, sign up for your FREE estimate today! 

A homeowner in Calmar, IA, noticed mold growth near the bottom of their walls. Worried this was a sign of a larger issue, the homeowner knew they needed to find an expert who would provide them with a solution. Unsure who to work with, the homeowner looked into "leak basement floor". One of the first companies to grab their attention was us, American Waterworks. The homeowner reviewed our recent waterproofing products and knew we were the ideal company for their project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Ryan, to the home to take a closer look. Ryan promptly arrived at the home and started the thorough inspection of the basement. During his walk-through, Ryan confirmed that the water was seeping in at the basement floors. Additionally, Ryan discovered the walls were not properly encapsulated. To prevent these issues from worsening, Ryan recommended installing several waterproofing products throughout the basement. After hearing Ryan's proposal, the homeowner decided to go ahead with his recommendations. Next, Ryan sent the proposal to our Logisitcs team to build and schedule the project. Once they received the plans, our Logistics team gave the final stamp of approval and scheduled the project for the following months. The project date arrived, so our crew traveled to the home to begin the installation. First, the crew began by installing WaterGuard around the basement perimeter. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew installed a feedline across the floor to connect the SuperSump+ to the new WaterGuard. Next, the crew shifted to installing CleanSpace on the unfinished basement walls. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching it to the basement walls with plastic drilled-in fasteners. Once all the products were installed, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today!