Your Trustworthy Decorah, IA Wet Basement & Crawl Space Repair Experts

A homeowner in Decorah, IA, noticed their exterior concrete was suffering from settlement and sinking. Worried this would turn into a tripping hazard, the homewoner knew they needed to find an expert to provide them with a solution. After looking into  "concrete lifting near me", one of the first companies to grab their attention was us, American Waterworks. Once they reviewed our concrete services, the homeowner knew we were the ideal company for their project and signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Romeo. The following week, Romeo traveled to the home to begin the thorough inspection. During the estimate, Michel confirmed that several areas were suffering from concrete settlement. To prevent the settlement from continuing, Romeo suggested lifting and leveling the concrete with PolyLevel, a polyurethane foam injection solution. The homeowner agreed and worked with Romeo to find the best installation date. When the installation date arrived, our Foreman and his crew traveled to the home to begin the installation. First, the Foreman and his crew started by inserting PolyLevel below the sinking slabs. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Finally, the crew cleaned up their materials and left the home. The homeowner was grateful for the excellent work the crew completed. If you notice your home is experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Decorah, IA, noticed their driveway was unlevel and damaged. Hoping to even out their slabs before they worsen, the homeowner knew they needed to find an expert to provide them with a solution. The homeowner looked into "uneven driveway repair near me", and the first company to grab their attention was us, American Waterworks. Impressed with our concrete leveling products, the homeowner knew that we were the ideal company for their project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Romeo. The following week, Romeo traveled to the home to begin the thorough inspection. During the inspection, Romeo noted that the driveway and walkway were suffering from settlement. To prevent the settlement from continuing, Romeo suggested lifting and leveling the slabs back to their original position. Knowing this was the best plan of action, the homeowner agreed with James and worked with him to find the best installation date. When the installation date arrived, our Foreman, Ryan, and his crew traveled to the home to begin the installation. First, Ryan and his crew started by inserting PolyLevel below the sinking slabs. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew, Ryan and his crew cleaned up their matierals and left the home. The homeowner was delighted to know their driveway was properly lifted and leveled. If you are worried your driveway is uneven and damaged, sign up for your FREE estimate today! 

Recently, a homeowner in Decorah, IA, reached out to us at American Waterworks after noticing water seepage in their basement, a common issue that can escalate if left unaddressed. Our mission has always been to redefine the customer experience by offering dependable and lasting home solutions. Following our streamlined process, the homeowner first interacted with our Appointment Specialist, setting the stage for a comprehensive solution tailored to their specific basement concerns. Our Design Specialist conducted an in-depth inspection, determining factors for the moisture intrusion and designing an effective plan leveraging our expertly engineered waterproofing products. To mitigate the water infiltration and restore peace of mind for the homeowner, we implemented a multi-component solution featuring WaterGuard, TripleSafe™ Sump Pump, and CleanSpace systems. The WaterGuard installation entailed embedding this innovative drainage system discreetly beneath the basement floor, guiding seepage directly to the TripleSafe™ sump pump. This smart mechanism assured superior water management, collecting intrusions efficiently without clogging—a vital consideration for our clients. The TripleSafe™ system added another layer of assurance with its powerful triple-pump configuration. Compatible with main power and battery operation, it’s engineered to handle extreme conditions. Unifying waterproofing performance, our CleanSpace encapsulation delivered a robust vapor barrier that addresses potential ongoing humidity challenges and ensures a clean, dry environment. By expanding our design known for outperforming standard materials, we prevented mold, mildew, and structural risks. Upon job completion, the decorum of our expert installation crew reaffirmed our company’s commitment to impeccable standards and leaving no trace behind. Now, this Decorah homeowner enjoys a dry, reliable basement space, safe and ready to adapt to future purposes.

A homeowner in Decorah, IA, recently faced the daunting challenge of a struggling basement whose waterproofing was no longer effective. Recognizing the potential risks of leaving the issue unresolved, they decided to seek out expert assistance for a lasting solution. Upon researching local providers, they discovered our expertise in basement waterproofing and reached out to our team. Our process began with an Appointment Specialist setting up a visit with a Design Specialist. During the home inspection, our Design Specialist identified the combination of hydrostatic pressure and inadequate drainage as key contributors to the basement's persistent water seepage issues. A comprehensive strategy was proposed, involving the deployment of our WaterGuard sub-floor perimeter drainage system, installation of the TripleSafe sump pump, and application of CleanSpace encapsulation system—all known for their high efficiency in diverting infiltration and sustaining a dry indoor climate. The production team meticulously executed the installation, starting with the WaterGuard system expertly positioned below the basement floor to capture water before it touches the surface. Connected seamlessly to the robust TripleSafe sump pump system, we ensured that any water intrusion would be quickly and reliably evacuated from the premises. Lastly, CleanSpace encapsulation enhanced the basement environment, establishing a critical moisture barrier to bolster the home's structural integrity and eliminate any mold-related concerns. The result was a completely dry and safeguarded basement that not only aligned with the homeowner's practical needs but also allowed for confident utilization of the space moving forward. This successful project in Decorah reaffirmed how our commitment to providing exceptional service and innovative home solutions continues to redefine customer experiences in the world of home contracting.

In Decorah, IA, a homeowner faced a challenging issue: persistent water leakage from their basement wall. Concerned about the potential for greater structural damage, they reached out to us at American Waterworks, confident in our ability to provide a reliable and effective solution. After our Appointment Specialist scheduled a home inspection, one of our Design Specialists conducted a comprehensive evaluation of the basement. It was clear that an effective waterproofing system was necessary to address the water seepage and prevent future occurrences. Our recommended solution included the installation of the WaterGuard drainage system and the SuperSump sump pump. The WaterGuard system is a discreet, cutting-edge perimeter drainage solution designed to capture wall and floor seepage efficiently. Installed below the basement floor surface, WaterGuard ensures water is directed away from the basement through its neatly concealed channels, reducing the risk of clogs that are common with traditional systems. Accompanying this, our SuperSump sump pump featured a high-capacity Zoeller pump and an advanced alarm system, designed to alert homeowners in the rare cases of unusually high water levels, ensuring continuous protection for the basement. Our production team, comprising seasoned foremen and skilled installers, completed the installation with precision. The worksite was carefully cleaned afterward, restoring the homeowner's peace of mind and redefining their experience with professional home solutions. By integrating both the WaterGuard and SuperSump systems, we successfully transformed the homeowner’s basement into a dry and secure environment, now ready for storage or recreational use. This successful project in Decorah, IA, underscores our commitment to delivering exceptional and lasting solutions for every home we service.

A homeowner in Decorah, IA, noticed their sidewalk was sinking and uneven. Hoping to even out their slabs before they become tripping hazards, the homeowner knew they needed to find an expert to provide them with a solution. The homeowner looked into "concrete leveling services near me", and the first company to grab their attention was us, American Waterworks. Impressed with our concrete leveling products, the homeowner knew that we were the ideal company for their project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Nate. A few weeks later, Nate traveled to the home to begin the thorough inspection. During the inspection, Nate noted that the driveway and walkway were suffering from settlement. To prevent the settlement from continuing, Nate suggested lifting and leveling the slabs back to their original position. Knowing this was the best plan of action, the homeowner agreed with Nate and worked with him to find the best installation date. When the installation date arrived, our Foreman, Sam, and his crew traveled to the home to begin the installation. First, Sam and his crew started by inserting PolyLevel below the sinking slabs. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After all the products were secured, Sam and his crew cleaned up their matierals and left the home. If you notice your home is experiencing a simliar issue, sign up for your FREE estimate today! 

A homeowner in Decorah, IA, noticed their basement was leaking due to water damage. With spring quickly approaching, the homeowner worried their basement was at serious risk. Hoping to find the best expert in their area, the homeowner looked into "waterproofing experts near me". One of the first companies to grab their attention was us, American Waterworks. After taking a closer look at our services, the homeowner knew that we were the perfect company for their project. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Ryan. A few days later, Ryan arrived at the home and began a thorough inspection of the basement. Following the inspection, Ryan confirmed the basement was suffering from water intrusion. To prevent the water intrusion from continuing, Ryan suggested securing several waterproofing products throughout the basement. Knowing this was the best plan of action, the homeowner agreed and worked with Ryan to find the best installation date. When the installation date arrived, our Foreman, Matt, and his crew started by securing WaterGuard along the basement perimeter. Once the WaterGuard was secured, the crew shifted to attaching CleanSpace to the unfinished basement wall. As soon as all the products were secured, the crew cleaned up their matierals and left the home. The homeowner was grateful for the excellent work completed by the crew. If you notice your home is experiencing a simliar issue, sign up for your FREE estimate. 

A homeowner in Decorah, IA, faced a pressing problem with their sinking driveway and was eager to address it before winter's harsh conditions set in. Concerns over additional damage and potential safety issues led them to search for a reputable concrete repair service nearby. That search brought them to American Waterworks, where, after contacting our appointment specialist, a detailed home inspection was arranged with one of our experienced design specialists. Upon assessment, we found that the driveway had suffered from soil erosion underneath, leading to the concrete slabs sinking and creating uneven surfaces. Our solution to this consisted of two key products: PolyLevel® and NexusPro®. Our production team, consisting of highly skilled foremen and installers, executed the repair with precision. The process began with the PolyLevel® system, where pea-sized holes were strategically drilled into the existing slabs. High-strength polyurethane foam was then injected beneath the slabs, filling voids and causing them to rise back to their intended positions. This corrective approach not only stabilized the slabs but also ensured longevity against similar issues in the future. Next, to safeguard against further erosion, we applied NexusPro® Joint Sealant, expertly sealing the cracks and joints in the concrete. This advanced sealant is engineered to withstand even the harshest UV rays and fluctuating temperatures, providing a durable defense against penetrating water and subsequent soil erosion. The outcome was a beautifully leveled and secured driveway, allowing the homeowner to hazard winter's approach with confidence. The homeowners expressed their satisfaction with the reliability and effectiveness of the solutions provided by American Waterworks, reinforcing our mission to deliver an exceptional customer experience with durable and long-lasting results.

In Decorah, IA, a homeowner found themselves facing an all-too-common situation: their concrete patio was sinking and settling unevenly. This not only marred the aesthetic appeal of their outdoor space but also created potential safety hazards for family and guests. Seeking a professional, long-term solution, they reached out to us at American Waterworks. Upon contacting our Appointment Specialist, the homeowner was promptly scheduled for an in-depth home inspection. One of our Design Specialists from the Sales Team conducted a comprehensive evaluation, pinpointing the primary issues: settling due to voids beneath the concrete surface and unsealed joints allowing moisture infiltration. After detailed assessment, we proposed a reliable and lasting solution involving the installation of our specialized products: PolyLevel and NexusPro. Our experienced production team, led by a seasoned foreman, arrived onsite ready to address the challenge. The first step was to employ the PolyLevel system. Small, strategic holes were drilled into the affected concrete pieces. Through these pea-sized entry points, high-strength polyurethane foam was injected. This meticulously expanded into voids below, lifting and leveling the slabs effectively back to their original position, covering even the variable depths within just a short span. Following the leveling process, our focus turned to enhancing durability. Utilizing NexusPro Joint Sealant, we sealed all visible cracks and joints. Unlike traditional caulk, NexusPro is designed to withstand weather extremes—in particular, UV resistance and adaptability through freeze-thaw cycles. Once our work was completed, necessary cleanup ensured that the area was left both safe and visually restored to its former elegance. The homeowner expressed satisfaction, highlighting the significant transformation both in appearance and usability of their outdoor space. With our expertise, the concrete challenges were adeptly addressed, showcasing American Waterworks' commitment to offering not just solutions, but peace of mind and reliability.

As September was quickly approaching, a homeowner in Decorah, IA, realized it was time to schedule their annual maintenance appointment. The homeowner called our Service team and set up their annual maintenance appointment. Once the appointment was set, we sent one of our Service Technicians, Curt, to the home to take a closer look. Curt promptly arrived at the home and began the thorough inspection of the installed products. While completing the inspection, Curt noted that two of the joints required replacement. Curt shared his findings with the homeowner, and they decided to go ahead with his suggestions. Next, Curt worked with the homeowner to find the best installation date. When the installation date arrived, we sent one of our Foremen, Troy, to the home to start the installation. Troy and his crew began by taking out the old joints. Next, the crew utilized NexusPro, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once all the products were secured, the crew cleaned up their matierals and left the home. If you notice your sidewalk joints need repair, sign up for your FREE estimate today! 

A local church in Decorah, IA, knew it was time to repair its cracked and uneven parking lot and sidewalk. Unsure who to work with, the homeowner decided to look into "concrete lifting and leveling services near me". One of the first companies to grab their attention was us, American Waterworks, so the homeowner decided to take a closer look at our services. Impressed with our stellar ratings and reviews, the homeowner knew that we were the ideal company for their project. Next, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Nate. A few weeks later, Nate arrived at the home and began the thorough inspection of the basement. During the inspection, Nate confirmed that several areas were suffering from settlement. To prevent the settlement from continuing, Nate recommended installing PolyLevel underneath the struggling sidewalk. Knowing this was their best plan of action, the homeowner agreed with Nate's proposal. Nate worked with the homeowner to find the best proposal date. Once the proposal date was selected, the project was assigned to our Foreman, Troy, and his crew. A few days later, Troy and his crew traveled to the home to begin the project. First, Troy and his crew began by installing PolyLevel underneath the struggling sidewalk. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After the products were secured, the crew cleaned up their materials and left the home. The homeowner was impressed with the excellent work completed by the crew, so they left a stellar review. If you notice your sidewalk is suffering from a similar issue, sign up for your FREE estimate today!

A homeowner in Decorah, IA, noticed cracks forming along their foundation wall and was concerned it would lead to irreparable damage. The homeowner began looking into foundation repair services and found us. After looking through our website, the homeowner contacted us to schedule their FREE estimate. 

In about a week, our Design Specialist, Ryan K., arrived at the home for the inspection. Ryan provided a thorough inspection, answering any questions the homeowner had, and provided a proposal. Ryan recommended GeoLock, our elite wall anchor system that permanently stabilizes foundation walls. After looking over the proposal, the homeowner happily agreed to Ryan's suggestions, and his design was then sent to our Foreman.

In about a month, our Foreman, Francisco E., and his crew arrived at the home for the installation. The crew installed a total of 7 anchors. These anchors are installed by first digging a hole several feet away from the foundation. An earth anchor is placed inside the hole and is then attached to the interior wall. Both anchor plates are connected by a small steel pole that runs through the ground. After the crew was done with the installation, they cleaned up their equipment and left the home.

Now, our customer has a stable foundation wall! Have you noticed cracks forming along your foundation walls? Schedule your FREE estimate today by clicking HERE!

A homeowner in Decorah, IA, noticed there was water leaking from their basement walls. Uncertain where the water was coming from, the homeowner knew they needed to find a proper solution. Knowing they could not complete the project themselves, the homeowner began looking for "leaky basement wall repair near me". After comparing several companies, the homeowner decided to work with us, American Waterworks. Impressed with our ratings and reviews, the homeowner knew we were the ideal company for the project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. After the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Ryan. Once he arrived, Ryan began a thorough inspection of the basement and foundation. While inspecting the basement, Ryan found that the west wall was suffering the most from water intrusion. To stop the leaking water, Ryan recommended waterproofing along that wall. Ryan presented his proposal, the homeowner knew it was their best plan of action. Next, Ryan sent the plans to our Logistics team to finalize and schedule the project. Our Logistics team gave their stamp of approval, then the proposal was scheduled for the following month. The project date arrived, and then our Foreman, Juan, and his crew traveled to the home to begin the installation. First, Juan and his crew started by installing WaterGuard along the west wall. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to attaching CleanSpace to the unfinished basement wall. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. As soon as all the products were secured, the crew cleaned up their materials and left the home. The homeowner was in awe of the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today!

A homeowner in Decorah, IA, was driving their car into their garage when they realized they could not get the car over the drop. Worried the issue would worsen, the homeowner knew they needed to find a professional that would solve the issue. The homeowner asked a local Facebook group for any recommendations and several members recommended working with us, American Waterworks. Convinced to give us a chance, the homeowner signed up for their FREE estimate. Once the estimate was set, we sent Aidan, one of our Design Specialists, to the home to perform the estimate. Aidan completed the detailed inspection and found that the sidewalk was settling and sinking into the ground. To stop the sinking from continuing, Aidan recommended lifting the driveway with PolyLevel. The homeowner agreed with Aidan's proposal and the plans were sent to the office to be approved. Once the office approved the plans, they assigned them to our Foreman, Dylon, and his crew. Dylon and his crew traveled to the home and began the PolyLevel installation. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. After the driveway was lifted to its original level, the crew cleaned up their materials and left the home. The homeowner was in awe of the PolyLevel installation process and the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today! 

 A homeowner in Decorah, IA, tripped walking into their home one evening. After some investigating, the homeowner noticed several of their slabs were uneven and crooked. Worried someone would be injured, the homeowners knew they needed to find a solution to their tripping issue. Hoping to avoid total concrete replacement, the homeowner began looking into concrete lifting and leveling services near them. The homeowner looked into "concrete leveling near Decorah, IA" and American Waterworks stood at the top of the list. After seeing our 4.9/5 star rating on Google, the homeowner knew we were the best company for them. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Brad, to take a look at the affected concrete. Brad arrived at the home and began by taking a close look at the driveway and walkway leading to the home. Following his detailed inspection, Brad determined the sidewalk and driveway were sinking due to soil settlement. To stop the sinking from continuing, Brad suggested filling the void and lifting the sidewalk and driveway back to its original level. The homeowner considered all their options but ultimately decided this was the best plan. Once the homeowner approved, Brad passed the plans to Logistics to build the project. As soon as the project was built, it was assigned to our Foreman, Jordan, and his crew to begin. Jordan and his crew traveled to the home and began the project by lifting the sinking sidewalk and driveway with PolyLevel. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro Sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the driveway and sidewalk were lifted and repaired, the crew cleaned up their materials and left the home. The homeowner was thankful and impressed with the work completed by Jordan and his crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A movie theater in Decorah, IA noticed that they had a crack in their foundation. They got in touch with a local engineer, and the engineer recommended that they contact American Waterworks. Brad R. contacted us to receive a FREE estimate, so we sent out our Commercial Sales Specialist, Tom Webbles, to inspect their foundation and design a solution. Tom recommended that we install piers to lift the foundation and transfer its weight to the pier instead of the soil. Brad liked the proposal that Tom put together, so he decided to move forward with the installation.

Our production crew started the installation process by removing the concrete and soil where they needed to install the piers. They drilled seven helical piers deep into the soil underneath the foundation of the movie theater. Once the piers reached stable soil, the foundation was raised and there was no longer a crack. They also sealed the cracks with concrete to ensure that water could not seep through. Our foundation repair solutions are guaranteed for a lifetime, so Brad is confident that he chose the right solution to protect the movie theater for the long-term.