Wet Basement Repair & Basement Waterproofing in Sparta, WI

In Sparta, WI, a homeowner was experiencing sunken concrete around their home and had caused trip hazards to form. Knowing the issue would worsen over time and lead to additional safety risks, the homeowner began searching for concrete driveway repair and found us. After browsing our website and becoming impressed by our before and after concrete repair images, the homeowner knew we would be the right company for their home improvement project. Determined to find a lasting solution, they contacted our Appointment Center to schedule their FREE estimate with one of our trained experts.

In about a week, our Design Specialist, Michel R., arrived at the home for a thorough inspection. During the inspection, Michel took a close look at the driveway, patio, and walkway, measuring how much the slabs had settled. After reporting his findings, he also explained how soil expansion and contraction is one of the most common causes of sinking slabs. As the weather shifts, so does the soil beneath the slabs. When it's warm, it often contracts, causing gaps to form in the soil. Eventually this leads to the slabs sinking and forming cracks. To restore their driveway, walkway, and patio, Michel recommended using PolyLevel, our poly foam expanding solution installed beneath the slabs to effectively lift them, and NexusPro, our silicone-based sealant to seal the joints and repair the cracks that have formed. Unlike traditional methods like mudjacking, PolyLevel cures in seconds, allowing homeowners to enjoy their improved concrete in the same day. Happy with the recommendations, the homeowner decided to move forward with the project.

In about a month, our Foreman, Dylon V., and his crew arrived at the home for the installation. The crew began by drilling small holes into the sunken slabs. Then, PolyLevel was injected beneath, filing in the voids in the soil. Once the slabs have been lifted to the desired height, the crew ensures it is level before sealing the holes. Lastly, they applied NexusPro, along the joints and the cracks providing a seamless look. Now, our customer can have peace of mind! Experiencing sunken concrete slabs? Click HERE to schedule your FREE estimate today!

In Sparta, WI, a homeowner noticed water stains along the edges of their basement floor. Concerned about mold growth, the homeowner began looking into basement waterproofing contractors around the area and found us. After browsing our website and becoming impressed by our basement waterproofing before and after photos, the homeowner knew we would be the right contractor for their home improvement journey. They soon contacted us to schedule their FREE estimate with one of our trained experts.

In less than a week, one of our Design Specialists arrived at the home to provide a thorough inspection. During the inspection, they took a close look around the basement, taking note of the areas where water leaks were present. They also explained how hydrostatic pressure is one of the most common causes of basement water issues. When it rains or floods, water pools around the home. Having nowhere to go but downward, the water enters the home through weak points in the foundation. After explaining this and reporting their findings to the homeowner, our Design Specialist created a solution to waterproof the basement. They recommended installing WaterGuard, our interior drainage system that directs water leaks to the sump system. Happy that our products come with a warranty, the homeowner decided to move forward with the project.

In about a month, our Foreman, Luis D., and his crew arrived at the home for the installation. The crew began by drilling along the edges of the floor to create a trench. Then, clean gravel is placed, and WaterGuard is added on top. It is then connected to the sump system to make sure it can safely remove the water. Once this is completed, the flooring is restored. The crew successfully installed 27ft of WaterGuard. That way, our customer will no longer experience water leaks along the edges of their floor! Looking for basement waterproofing in the area? Schedule your FREE estimate today by clicking HERE!

In Sparta, WI, a homeowner was looking through the weather for the week and noticed it was going to warm up. Concerned that the snow around their home would melt and enter their basement, the homeowner began looking into basement waterproofing contractors around the area and found us. After browsing our website and becoming impressed by our 5-star reviews, the homeowner contacted us to schedule their FREE estimate.

In less than a week, our Design Specialist, Ryan K., arrived at the home to provide a thorough inspection. During the inspection, Ryan tested the humidity levels in the basement and took note of the areas where water leaks were present. He also explained how hydrostatic pressure is one of the most common causes of water leaks in basements. Hydrostatic pressure is pressure exerted by a liquid. In this case, when the snow melts, water pools around the home and soaks into the soil. Water then forces itself through weak points in the foundation, entering the basement. After explaining this to the homeowner and reporting his findings, he began working on a detailed solution. Ryan recommended installing WaterGuard, our interior drainage system that directs water leaks to the sump system, CleanSpace, our vapor wall liner that prevents water vapor from permeating the walls, TripleSafe, our reliable sump system with three levels of protection, IceGuard, our anti-freeze discharge line that allows water to escape in freezing temperatures to prevent sump burnout, and Aprilaire, our strong dehumidifier. After looking over the proposal, the homeowner was happy to see all our products come with a warranty and decided to move forward with the project.

In about a month, our Foreman, Kiko P., and his crew arrived at the home for the installation. The crew began by installing CleanSpace to the walls using drilled-in fasteners to ensure it remains in place. Then the crew drills around the perimeter of the floor and adds clean rocks. WaterGuard is then placed on top. Next, they created a sump pit and installed TripleSafe. IceGuard was then installed at the exterior of the home and connected to the sump system. Once all the waterproofing systems were connected, the crew installed the dehumidifier and restored the flooring. The crew was able to successfully install 34ft of WaterGuard and CleanSpace, 1 TripleSafe, 2 IceGuards, and 1 Aprilaire. 

Now, our customer can have a dry basement! Concerned all the snow melt would find its way to your basement? Schedule your FREE estimate today by clicking HERE!

In Sparta, WI, a homeowner was growing increasingly concerned with the appearance and stability of their uneven and damaged concrete. They knew the condition might worsen, allowing water to seep through and potentially cause further damage. With these thoughts in mind, they reached out to us at American Waterworks, opting for our complimentary concrete repair estimate to get to the heart of the issue. Our Appointment Specialist promptly scheduled a thorough home inspection. Upon arriving, our Design Specialist meticulously examined the problematic concrete and diagnosed the underlying issues. Their recommendation? The combination of our renowned PolyLevel® and NexusPro® systems ensures a stable and aesthetically pleasing fix. Our dedicated production team, equipped with a Foreman and skilled installers, began with the installation process. Using the PolyLevel® system, we drilled small, precise holes into the affected concrete slab. Through these entrances, we introduced our specialized high-strength polyurethane foam, allowing it to expand and meticulously lift the concrete back to its intended position. This stabilization process was finished off with our NexusPro® Joint Sealant. This product was carefully applied along cracks and joints, ensuring water would no longer infiltrate and compromise the soil beneath, regardless of weather fluctuations. Once the job was complete, the homeowner stood satisfied, witnessing the transformation. Their concrete surfaces were not only level and stable but also better protected against future elements. With matched expertise and durable solutions, the homeowner now had a renewed confidence in their exterior’s reliability and visual appeal, knowing it was expertly handled by American Waterworks.

A homeowner in Sparta, WI, noticed that his concrete slabs have begun sinking, causing a trip hazard to form due to their unevenness. Knowing the issue would only continue to worsen and lead to further issues down the road, the homeowner began to search for "best concrete lifting services in Sparta, WI" and found a list of contractors. After looking through everyone's website, the homeowner knew that we were the best choice based on reviews and before-and-after photos. So, he contacted us to schedule his FREE concrete estimate. 

In about a week, our Design Specialist, Will R., arrived at the home to provide a thorough inspection, answer any questions the homeowner had, and provide the best solution. During the inspection, Will explained to the homeowner that soil washout is one of the most common causes of sinking concrete slabs. He explained that soil washout is the process in which water moves through the ground and washes away the supporting soils, keeping the slabs upright. This process is especially common in the Midwest, as we often get rain and floods. To fix this issue, Will recommended PolyLevel, our modernized solution for concrete lifting. PolyLevel works by first drilling small holes into the slabs. Then, PolyLevel is injected beneath the slab, filling in the voids and space in the soil (due to soil washout). As it fills in the empty spaces, it also compacts the soil before lifting it. PolyLevel is not only a quick and effective solution, but it is made of a completely waterproof material, preventing soil washout in the future. Alongside PolyLevel, Will also recommended NexusPro, our silicone-based sealant that provides flexibility and long-lasting durability unlike traditional sealants, to be applied along the joints. After looking over Will's proposal, the homeowner happily agreed to his recommendation and decided to move forward with the project. 

In about a month, our Foreman, Troy J., and his crew arrived at the home for the installation. The crew lifted the driveway as well as the walkway with PolyLevel. Once they were done with lifting the concrete slabs, they sealed the joints with NexusPro. After the crew was done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have a smooth and level walkway and driveway! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Sparta, WI, knew it was time to level their uneven concrete slabs. Knowing the issue would only worsen, the homeowners knew they needed to find a permanent solution. The homeowner looked into "concrete lifting near me" and one of the first companies to catch their attention was us, American Waterworks.  Impressed with our stellar ratings and reviews, the homeowner knew we were the ideal company for their project. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialists, Will. The project date arrived and the homeowner prepared for the arrival of our Design Specialist, Will. When the appointment date arrived, Will traveled to the home, introduced himself to the homeowner, and began the thorough inspection. During the detailed inspection, Will discovered the concrete was suffering due to settlement. To prevent the settlement from continuing, Will recommended filling and lifting the sidewalk back to its original state. After hearing the benefits of PolyLevel, the homeowner knew this was their best plan of action. Once the homeowner approves, Will send the proposal to our Logistics team to build and schedule the project. Our Logistics team built the project and then scheduled it for a few weeks later. Once the project date arrived, our Foreman, Sam and his crew traveled to the home to begin the project. First, Sam and his crew focus on lifting the concrete with PolyLevel. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After all the products were secured, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

During a heavy rainstorm, a homeowner in Sparta, WI, noticed their sump pump was not running at full efficiency. Concered this sump pump could be out-of-date, the homeowner knew they needed to find an expert that would provide them with a solution. Unsure who to work with, the homeowner asked their neighbor for any recommendations. Previously, their neighbor had waterproofing issues in their home and had their sump pump replaced by us, American Waterworks. After hearing how great their experience was, the homeowner decided to go ahead and sign up for their FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Chuck, to the home to take a closer looker at the sump pump. A few days later, Chuck promptly arrived at the home and began his detailed inspection of the basement. During the inspection, Chuck confirmed the sump pump required replacement. Additionally, Chuck recommended installing additional waterproofing products throughout the basement. After hearing Chuck's recommendations, the homeowner decided to go ahead with his proposal. Next, Chuck sent the proposal to our Logsitics team to build and schedule the project. Our Logistics team gave the final stamp of approval and then scheduled our project with our Foreman, Kiko, and his crew. Once the project date arrived, Kiko and his crew traveled to the home to begin. First, Kiko and his crew started by installing WaterGuard. WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew installed a feedline across the floor to connect the SuperSump+ to the new WaterGuard. Next, the crew went outside and installed an IceGuard, an anti-freeze fitting that is installed on the outside of your home and ejects water away from the foundation in the event the sump pump discharge line freezes or becomes clogged. After all the products were secured, the crew cleaned up their materials and left the home. The homeowner was happy to know their sump pump was properly working. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Sparta, WI, noticed their driveway slabs were quite uneven. Unsure of the cause, the homeowner knew they needed to find a permanent solution before the problem worsened. The homeowner looked into "poly concrete lifting near me" and one of the first companies to catch their eye was us, American Waterworks. After taking a closer look at our award-winning services, the homeowner knew we were the ideal company for their project. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Dustin. Dustin promptly arrived at the home and began the detailed inspection of the driveway. During the inspection, Dustin found that several of the driveway slabs were sinking. To prevent the sinking from continuing, Dustin recommended lifting and leveling the slabs back to their original position. The homeowner knew this was their best plan of action, so they decided to go ahead with the Design Specialists recommendations. Next, Dustin passed the proposal off to our Logistics team to approve and finalize the project. Our Logsitics team gave the final stamp of approval, then the project was scheduled for a few weeks later. Once the project date arrived, our Foreman, Troy, and his crew traveled to the home to begin the installation. First, Troy and his crew began by installing PolyLevel underneath the struggling concrete. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the driveway was fully repaired, the crew cleaned up their materials and left the home. The homeowner was relieved to know their driveway was properly repaired. If you are suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Sparta, WI, made a startling discovery, their basement walls were beginning to separate. Anxious their foundation was in serious trouble, the homeowner knew they needed to find a permanent solution. Knowing they could not complete the project themselves, the homeowners began looking into the foundation repair options closest to them. One of the first companies to catch their eye was us, American Waterworks. Impressed with our high ratings, the homeowner knew we were the ideal company for their project. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of our Design Specialist, Chuck. Chuck promptly arrived at the home and began his detailed inspection. During his inspection, Chuck found that the foundation was struggling from settlement and needed to be permanently stabilized. Knowing this was their best option, the homeowner decided to go ahead with Chuck's game plan. Next, Chuck passed the project on to our Logistics team to approve and finalize the plans. Our Logistics team finalized and scheduled the project for the following month. Our Foreman, Jose, and his crew arrived at the home to begin the installation. First, Jose and his team prepared the walls for the GeoLock Wall Anchor installation. Next, the crew began the GeoLock Wall installation. The crew installs the GeoLocks by digging a section of the ground to place the first GeoLock anchor. Once the GeoLock is in place, another anchor is attached to the interior wall. Both GeoLocks are connected by a small, steel pole direct through the ground. Once the GeoLocks are secured, the soil is put back on top of the ground. Along with the GeoLock installation, the homeowner asked that the tightening kit be included as well. This will allow the homeowner to straighten their walls over time. Once all five GeoLock Wall Anchors were secured, the crew cleaned up their materials and left the home. The homeowner was in awe of the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

In Sparta, WI a homeowner was enjoying her front yard area and noticed how damaged and worn down the front stoop looked. She decided to take action and find a solution before the problems continued to worsen. She began her search for companies that offered services in the area and found the American Waterworks website. The homeowner was impressed with the number of five-star reviews and positive customer experiences that she decided to schedule a FREE no-obligation estimate with us to learn more. When one of our Design Specialists, Will Reader, arrived at the home he carried out a detailed inspection and informed the homeowner of his recommendations. She was pleased with the plans and agreed to move forward with the installation process. Our Forman, Troy Johnson, and his crew later arrived at the site to install both our PolyLevel solution and NexusPro sealant. They began by drilling small, penny-sized holes in the concrete and inserted ports through the holes to reach the empty space below the surface. Then, they injected the PolyLevel through the ports until the stoop was fully lifted back to its original height. Next, they filled the empty holes with the NexusPro and also used it to seal the joints along the sides of the stoop area. They laid a thin layer of native sand on top of the sealant to finish off the project and leave the stoop looking even better than before. The homeowner was pleased with our team members' work and happy to have the problems gone.

Don't wait if your stoop is in similar condition! Get started with your FREE estimate with American Waterworks and we'll help.