American Waterworks Before & After Photos

Jeffrey L.'s concrete slab underneath his deck was sinking towards the house, and he wanted to get it inspected by a professional. He found American Waterworks, so requested a FREE estimate with our Design Specialist, Richie. Richie went to Jeffrey's house, carefully inspected his concrete, and proposed the solution of our PolyLevel and NexusPro. Jeffrey was confident in the solution and products, so he moved forward with the project. 

Our Foreman, Sam, and his crew member injected the PolyLevel underneath the slab to lift and stabilize the concrete surface. This product is a unique foam that fills the voids caused by soil erosion and is adjustable to loads of all sizes. Next, our crew applied our NexusPro over the crack between the door and concrete. Our NexusPro is a special sealant that prevents moisture from seeping underneath the concrete and gives it a clean, neat finishing appearance. The project only took three hours and Jeffrey was very happy with the work. 

Is your concrete sinking or cracking? We can help you! Give us a call now to schedule your FREE estimate.

A customer from Moorhead, MN, got in contact with us when they noticed their basement wall was beginning to lean inward. They knew if they left the issue, they would run the risk of the wall failing completely, which would be hazardous to the structural integrity of the home and would cost more to fix at that stage. When they called in, they used their FREE estimate, and our Design Specialist, Kole, headed out to their property to do a thorough inspection of the issue. When he concluded, he found that the wall was leaning 2' inward, meaning corrective action was needed. Kole was able to recommend the homeowner a solution, our PowerBrace wall repair system. Kole explained that our PowerBrace is a steel I-beam designed to stabilize failing basement walls and provide the potential to straighten walls over time. This system can be tightened to make bowing or tilting walls straighter and more vertical over time, meaning the system will last for a long time to come. The customer agreed with Kole's recommendations and work began shortly after. Our Foreman, Zach, and his crew ended up strategically installing 7 of our PowerBraces along the Southside of the basement. 

When the job was complete, the customer was happy with our work and relieved to know that her wall would be straight for a long time to come! 

A Moorhead, MN, man had just learned of the dangers that radon gases pose to households. He wanted to ensure the safety of his family, so he headed to a local home improvement store to pick up a short-term radon test. After following the instructions on the package, he was alarmed to find out that the radon level in his home was 5 pCi/L. He didn't want his family to breathe in unhealthy air for longer than necessary, so he began to look for a radon mitigation company that could give him more radon gas information. Through his search, he found our website and signed up for his FREE estimate. Several weeks later, Jackson P, one of our Design Specialists, headed out to the home to see what could be done. 

Once he finished his inspection, Jackson was ready to discuss the next steps with the homeowner. Jackson informed the homeowner that he wanted to install a radon mitigation system. When installed by an experienced radon mitigation specialist, a radon abatement system will lower the concentration of radon gas in your interior air to the minimal levels recommended by the EPA and other health and safety agencies. Before installing a radon mitigation system, the contractor will run a radon test to determine if radon abatement is necessary. A typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. The homeowner agreed with Jackson's recommendations and scheduled the job for some time later. 

On the day of the project, Jackson returned to install the system. He completed the project with no complications. Now, our customer can confidently breathe fresh air circulating in his home! 

Has your home been tested for dangerous radon gas? Click HERE for your FREE estimate! 

A homeowner in Moorhead, MN recently learned of the dangerous health risks with radon. He learned that radon is a by-product of uranium, a naturally occurring radioactive element which can be found in soil. Concerned that his family was unknowingly breathing in the toxic fumes, the homeowner decided to use a radon testing kit. After a couple of days the results were over 4 pCi/L and the homeowner contacted us to schedule his FREE estimate.

In a couple of weeks, our Design Specialist, James N., arrived at the home to provide a thorough inspection, answer any questions, and provide the best solution for the homeowner. During the inspection, James explained to the homeowner that it was good that he tested his home for radon as we cannot smell, taste, hear, see, or touch it. James then created a design to where our radon mitigation system would be installed. After looking at the proposal, the homeowner happily agreed and scheduled the installation date.

In a couple of weeks, our Radon Sales & Service Technician, Jackson P., and his crew arrived at the home for the installation. They began the installation by installing a PVC pipe into the footing of the home. The pipe is then connected to the radon mitigation system which is installed outside of the home. Once the crew was done with the installation and they ensured everything was working properly, they cleaned up their equipment and left the home.

Now, our customer and his family can breathe in fresh clean air! When was the last time you tested the radon levels of your home? Schedule your FREE estimate today by clicking HERE!

Lyle M. of Horace, ND needed the concrete walkway to his porch lifted and sealed. He found American Waterworks in the local newspaper, so he got in contact with our company and scheduled a FREE estimate. Our Design Specialist, Kole, went to Lyle's home, inspected his concrete, and proposed a solution. Lyle got all of his questions answered and was comfortable with Kole's approach, so he scheduled a date for the install.

Our Foreman, Tyler, and his crew member injected our PolyLevel underneath the concrete to raise the slab to its natural position. They also applied our NexusPro over the cracks and joints to seal them and prevent moisture from seeping underneath, which eventually disturbs the soil. 

We provide FREE estimates for all of our services! Give us a call today to schedule your FREE, no-obligation inspection!