American Waterworks Before & After Photos

A homeowner in Holmen, WI was dealing with a sunken concrete driveway and was concerned about it getting worse. He wanted to make a change, but figured it was best to see what his options were before agreeing to a project. He was familiar with the American Waterworks name, but not quite sure what our services included. Once he looked into our website more and saw that we offered FREE no-obligation estimates, he signed up for his own estimate and was eager to move forward with the process. He was greeted by Design Specialist Brad Williams, who carried out an inspection of the concrete and gave his recommendations to the homeowner. Knowing that this was the best plan and confident in our services, the homeowner agreed to the installations. Dylon VanCanneyt, one of our Foremen, and his crew made their way to the site where they installed both our PolyLevel solution to lift and level the driveway, and NexusPro, a flexible sealant to fill in the joints. The homeowner was pleased with the final results and happy to be rid of her driveway problems.

Don't put up with your sunken driveway this summer! We can help fix it. Start by signing up for a FREE estimate today.

A homeowner from Holmen, WI, was awaiting an American Waterworks Service Technician out to his home to perform an annual maintenance on a system we had placed a few years back. The homeowner had new concerns for his home and decided to talk to our Service Technician, Kyle H, about them. When Kyle arrived, the homeowner explained that his basement wall was showing signs of cracking, and he was concerned that it could mean something worse for his home. Kyle dedicated extra time to the homeowner's concerns, and when he finished his inspection and annual maintenance, he met back up with the homeowner to discuss the wall. Kyle explained that foundation walls are designed to withstand loads from above, not from the side. So when the pressure being exerted on the wall exceeds what the wall can withstand, it's not uncommon for homeowners to observe cracking, bowing, sliding in at the bottom of the wall, and/or tilting inward at the top. Kyle followed up, saying that while the situation seemed daunting, he had the fix. Kyle urged the homeowner to consider installing our GeoLock wall anchors, a system of heavy-duty galvanized earth anchors that counteract the pressure being exerted on the wall by anchoring it to the undisturbed soil beyond the home's foundation, permanently stabilizing basement walls, offering the best opportunity to straighten the walls without the cost and disruption of foundation replacement. The homeowner liked Kyle's recommendation and decided to schedule the project. 

Several months later, our Foreman, Kiko P, and his team were headed out to the home. Our team effortlessly installed 10 of our GeoLock anchors throughout the basement of the home. Now, our customer can rest easy knowing his failing foundation won't be shifting any time soon! 

Do you have concerning cracks in your foundation wall? Click HERE for your FREE estimate! 

A homeowner in Holmen, WI, was putting away storage when they noticed their foundation walls were beginning to bow inward. Worried this was a sign of a larger issue, the homeowner knew they needed to find a permanent solution. The homeowner looked into "bowing foundation repair near me," and several companies popped up. Only one company stood above the rest, American Waterworks, so the homeowner inspected our products and services. After seeing our eye-catching before and afters, the homeowner knew their project was in the best hands. The homeowner called our Appointment Center and signed up for their FREE, no-obligation estimate. Once the appointment was set, the homeowner prepared for the arrival of our Design Specialist, Dustin. A week later, Dustin arrived at the home, introduced himself to the homeowner, and began the thorough inspection of the foundation. During the inspection, Dustin confirmed the foundation was bowing inward. To prevent the bowing from continuing, Dustin recommended permanently stabilizing the bowing wall. Knowing this would provide them with a permanent solution, the homeowner knew this was their best plan of action. Once Dustin received the green light from the homeowner, he sent the plans to our Logsitics team to build and schedule the project. Our Logsitics team gave their final stamp of approval, then the plans were assigned to our Foreman, Arturo. A few months later, Arturo and his crew traveled to the home to begin the installation. First, Arturo and his crew started by making sure the wall was ready for installation. Next, the crew went ahead and installed nine GeoLock Wall Anchors along the north foundation wall. Once all the GeoLock Wall Anchors were secured, the crew cleaned up their materials and left the home. The homeowner was relieved to know their foundation was properly stabilized. American Waterworks is happy to provide its homeowners with peace of mind. 

A homeowner in Holmen, WI, was facing settling concrete issues and knew that the issue would only continue to worsen. The homeowner began researching concrete lifting and leveling services in the area and discovered us. After becoming impressed by our 5-star reviews, the homeowner contacted us to schedule his FREE concrete estimate with one of our Design Specialists!

In less than a week, our Design Specialist, Ross J., arrived at the home to conduct a thorough inspection, answer questions, and provide the best solution for the homeowner. During the inspection, Ross took note of the areas of concern and created a proposal. Ross recommended PolyLevel, our waterproof foam expanding formula that effectively lifts sunken slabs, and NexusPro, our silicone-based sealant with high durability and flexibility to seal the joints. After looking over Ross's proposal and asking questions about the product, the homeowner happily agreed to his recommendations. 

In about a month, our Foreman, Jordan S., and his crew arrived at the home for the installation. The crew installed PolyLevel along the walkway and driveway apron. PolyLevel is installed by first drilling small holes into the slabs. Then, PolyLevel is injected using an injection gun beneath the concrete slab. Once the slab has been lifted to the desired height, the crew seals the holes with cement. Lastly, they used NexusPro to seal the joints along the walkway and driveway. After the crew was done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing his concrete issues have been properly addressed! Have you noticed sunken concrete on your property? Click HERE to schedule your FREE estimate today!

A homeowner in Holmen, WI, was concerned about his driveway because the concrete slabs had begun sinking, causing the area to become uneven with trip hazards. Knowing the issue would only worsen, the homeowner began searching for "concrete repairs in Holmen, WI" and found us. After looking over our website and becoming impressed by our reviews, the homeowner knew we were the right company to do the job. The homeowner then contacted us to schedule his FREE concrete estimate. 

In about a week, our Design Specialist, Will R., arrived at the home to provide a thorough inspection, answer any questions, and create a proposal for the homeowner. During the inspection, Will took note of the areas of concern, such as the trip hazard along the walkway and the unevenness along the driveway. Will then spoke with the homeowner to provide the best solution that meets what they were looking to get done, as well as their budget. Will ended up recommending PolyLevel, our innovative foam expanding formula that allows for accurate lifting of sunken concrete slabs, and NexusPro, which is a silicone-based sealant that is specifically engineered for joint sealant. After looking over Will's recommendations, the homeowner happily agreed and decided to move forward with the project. 
In about a month, our Foreman, Patrick B., and his crew arrived at the home to carry out the installation. The crew began by drilling small holes into the concrete slabs of the driveway and walkway. Then, they injected PolyLevel beneath the slab, filling in the voids in the soil and causing the slabs to lift. Once the slab has been lifted to the desired height, the crew ensures everything is leveled before sealing the holes. Lastly, they sealed the joints along the driveway. 

Now, our customer can have peace of mind with his smooth and even driveway and walkway! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!