Concrete Leveling Before & After Photos

A homeowner in Plymouth, MN, was growing more and more frustrated with the concrete in front of her house. Her concrete stairs leading up to her front door were beginning to sink, creating a trip hazard and an eyesore. Not wanting to sacrifice safety or curb appeal, the homeowner decided to begin researching companies in the area that could help. When she came across our website, she decided to take advantage of our FREE estimates, and a few weeks later, our Design Specialist, Daniel R, headed out to the home. 

Once Daniel completed his inspection, he met with the homeowner to give her his recommendation. He informed her that American Waterworks could address the sinking with our PolyLevel method. PolyLevel is a polyurethane foam that expands when injected beneath sinking slabs, filling voids left by soil erosion and slowly lifting concrete back into place. Daniel went on to say that we finished our lifting process with the installation of our NexusPro. A silicone-based sealant, NexusPro gets applied directly to the cracks and joints in the slab being lifted, preventing unwanted elements from permeating the slab. The homeowner agreed with the proposed work and the job was scheduled for a month later. 

On the day of the installation, our Foreman, Sam K, and his team were able to complete the lift to our customer's satisfaction. Now our homeowner can rest easy knowing her curb appeal and safety have been restored!
Do you have sinking stairs that are causing an eyesore? Click HERE for your FREE estimate! 

Dave P. in Cleveland, MN noticed his patio concrete had settled and was uneven in a couple of spots. He was unhappy with the way it looked and wanted it completely level and to have the cracks sealed. After researching concrete repair contractors and receiving estimates, he decided to have American Waterworks repair his concrete.

Our concrete repair experts drilled small holes into the concrete to inject a polymer foam called PolyLevel. Once the foam is injected into the concrete, the foam expands and raises it. They injected the foam into multiple spots in patio until the concrete was raised and level to its original position. Then, they caulked and sealed the cracks with our NexusPro sealant to protect the concrete and give it a nice, finished look. The process only took a couple of hours, and Dave was very pleased with the results!

Interested in learning more about concrete repair? Click here!

Dale D. of Shakopee, MN had concrete that was sinking on one end of his courtyard. He got in contact with American Waterworks and seeing us on HomeAdvisor. Our Design Specialist, Ben Allrich, went to the property, inspected the concrete, and wrote out a detailed solution of our PolyLevel, which is designed to raise and stabilize the concrete surface, and fill the voids underneath the slab that are caused by soil erosion. Dale followed through with the proposal and got a date scheduled for the project. 

Our Foreman, Ben Koehler, and his crew member injected 125 pounds of our PolyLevel to raise the surface. Dale was happy with the project and was beautified by the transformation! 

If your concrete is sinking or cracking, give us a call today or click HERE to request and schedule your on-site FREE estimate and inspection!

James from Shakopee, MN got in contact with us when he began to notice that his front walkway was sinking further and further away from his front step. He was concerned that if the issue was left unresolved, the slab would continue to sink, creating an even more dramatic tripping hazard. When he called our office, we set him up with our FREE estimate, entitling him to a thorough inspection by one of our Design Specialists. Once the appointment was set, our Design Specialist, Daniel, headed out to the property to see if we could help. Once he finished his walkthrough, he made his recommendations. He wanted to lift the problem slab using our PolyLevel solution. Daniel explained that our PolyLevel is an expanding polyurethane foam that works to fill the voids caused by soil erosion and works to raise and stabilize the concrete surface. Our customer agreed and work began shortly after. 

Our Foreman, Dylan, and his crew began the process by strategically drilling holes into the problem slab. Next, they injected the foam into one hole at a time, closely monitoring the lifting process to ensure no overcorrections were made. Once the job was finished, James was relieved to know that he no longer had to worry about trip hazards in front of his house! 

Jon W. in Eden Prairie, MN had a large crack through the concrete on his steps and his concrete had started sinking, causing a trip hazard. He previously had his stoop mud-jacked, but he was having problems again. He started looking for another concrete repair contractor to see what his options were, and he was directed to American Waterworks. We sent one of our Design Specialists, Rick Weber, to his home to assess his concrete situation and develop a solution. Jon was glad to learn that PolyLevel is a durable, faster, and more affordable alternative to traditional concrete repair, so he scheduled a date for the installation.

Our Foreman, Brandon Wiskow, drilled small holes into the concrete on his stoop where he needed to inject the foam. He injected our PolyLevel into the holes until the concrete slab was level. Then, he sealed the cracks in the concrete with our Nexus Pro sealant, which protects the concrete and gives it a nice, finished look. The process only took about half a day, and now Jon will be able to enjoy level concrete for years to come.

Are you suffering from cracked or uneven concrete? Click here to receive a FREE estimate!