Proven Foundation & Crawl Space Repair Experts in Hennepin County, MN

Olivia R. in Osseo, MN was experiencing water pooling in her well room which was causing a musty smell throughout her home. She was worried about how this could potentially affect her family's health, so she contacted American Waterworks to see how we could help her. Our Design Specialist, Chad Johnson, came to her home to do a free onsite estimate. After thoroughly examining the well room, Chad developed a waterproofing plan that best fit her needs. 

Our team installed WaterGuard so that water could properly drain to the SuperSump sump pump. The next step was to put CleanSpace on all three walls of the well room. The combination of these waterproofing products created a clean and dry space that Olivia no longer had to worry about. 

Cal B. in Maple Grove, MN discovered that a wall in his basement had started bowing and was concerned that it could lead to the eventual loss of his structural integrity, which could lead to high-cost repairs. While researching contractors he found the American Waterworks website and decided that it was in his best interest to get a free onsite estimate. One of our Design Specialists, Chad Johnson, went to his home to do a full inspection and provide Cal with the best foundation repair option. Chad recommended that we install 5 wall anchors to permanently stabilize his foundation wall. Cal agreed and wanted to act as soon as possible so his foundation would not be compromised any further. 

Once the anchors were installed, Cal was pleased that he could immediately see results. His foundation wall is now permanently stabilized, and he can rest easy knowing that his foundation is secure. 

Roger B. in Spring Park, MN noticed that the roof of his crawl space was sagging, and he had a crack on the exterior wall of his home where the crawl space is. He also noticed that he had a lot of moisture in his crawl space and he thought he might be losing energy through that space because he was dealing with high energy costs. He decided it was time to have a professional inspect the situation. While he was researching contractors, he found American Waterworks and was pleased to see that we offer both waterproofing and foundation repair.

We sent one of our Design Specialists, Shane Nephew, to his home to find a solution and give him a FREE estimate. Roger was pleased with the proposal that Shane developed so he scheduled a date for the installation.

Our production crew installed our crawl space waterproofing system which consisted of, drainage matting along the floor, SilverGlo, CleanSpace and a Sedona dehumidifier. Then we installed 5 SmartJacks in the crawl space to support the beams of the flooring. To stabilize the home, we installed 10 push piers under the foundation.The entire process took a couple of days, but Roger and his family will benefit from this permanent solution for a lifetime.

TJU Construction was working on repairing a home in Minnetonka, MN to put on the market. While restoring the home, they realized they needed to have the basement waterproofed because water was seeping in and was causing damage to the home. They knew the home would be very hard to sell with a basement in that condition, so they contacted American Waterworks to receive a FREE estimate.

We sent one of our Design Specialists, Eric Hazelton, to the home to provide TJU Construction with a solution. Eric determined that the best option to waterproof the basement was to install a full perimeter of our WaterGuard drainage system and a new sump pump. TJU construction agreed and liked the proposal that Eric developed, so they scheduled the installation.

Our production team installed 126 ft. of WaterGuard around the perimeter of the basement and our SuperSump sump pump in one of the corners. The WaterGuard properly guides water to the sump pump. From there, the water is pumped through the discharge line and it is expelled to the outside of the home. The waterproofing process took two days to complete, but our system has a lifetime guarantee and is transferable to anyone who purchases the home. That basement will always be protected and whoever lives there will have peace of mind that they have a top of the line waterproofing system keeping their home dry.

Contact American Waterworks today to schedule your FREE estimate!

Noy P. in Champlin, had recently purchased a new home. She realized that the posts supporting the deck were not stable and they had sunk. The footings were resting on unstable soil which caused the sinking. She was concerned that her deck was no longer safe, and she was worried it was going to cause damage to the foundation of her home because it was putting extra stress on it. She decided she need to contact a professional to see what repairs needed to be made. She contacted the experts at American Waterworks and we sent one of our Design Specialists to her home to provide her with a FREE estimate and a solution. Noy was glad to learn that we would be able to stabilize her deck foundation with the installation of only 4 deck piers, so she went ahead with the installation.

Our production team drilled the piers deep into the soil until they hit stable soil, and shifted the posts from the unstable footings, to the secure piers. All of our foundation repair products are backed by a lifetime warranty, so Noy has peace of mind that she chose a permanent solution to protect the foundation of her deck.

Mike H. in Hopkins, MN was suffering from a failed sump pump. His old sump pump was no longer functioning, and moisture was accumulating around the sump pump, creating a musty smell. He began to look for companies that install new sump pumps, when he came across the American Waterworks website. He gave us a call to receive a FREE estimate, so we sent one of our Design Specialists, Shane Nephew, to his home to inspect the situation and provide a solution. Mike was pleased with the proposal that Shane developed, so they set a time to have the new sump pump installed.

Our production team removed the old sump pump and installed our SuperSump sump pump. The SuperSump is engineered to help keep the basement dry and healthy for extended periods of time, even in times of heavy water intrusion. It is capable of pumping 2,200 gallons of water per hour out of the home. Mike was pleased with how quick the installation was, and he now has peace of mind that his basement will remain a dry, clean space.

Jessica W. in Eden Prairie, MN had a sump pump in her basement, yet water was still seeping in. She was frustrated of dealing with a wet basement that was making the space dirty and unlivable. She started looking for a local waterproofing contractor, and she found American Waterworks’ website. She gave us a call to set up a free estimate, so we sent one of our Design Specialists, Chad Johnson, to her home to inspect her basement and to design a solution. Chad answered her questions and addressed her concerns. She was pleased with the proposal that Chad developed, so she decided to move forward with having our waterproofing system installed.

Our Foreman, Jesus Covarrubias, and his crew installed a full perimeter of our WaterGuard drainage system and a SuperSump sump pump system. The WaterGuard properly drains the water that is leaking into the basement to the sump pump. From there, the water is pumped through the discharge line and expelled from the home. Our waterproofing system is backed by a lifetime warranty, so Jessica has peace of mind that her basement will always be protected from water. She is glad she chose to invest in the long-term protection of her home.

Wyllie R. in Wayzata, MN had a concrete driveway that was sinking. It had already sunk about two inches below the garage concrete slabs and it was getting worse over time. A friend of his mentioned what a good experience they had working with American Waterworks, so he decided to give us a call for a free estimate. We sent one of our Design Specialists, Chad Johnson, to his home to assess his sinking concrete and design a solution. Chad assured him that we could raise and level his concrete within a matter of hours using our PolyLevel foam injection. Wyllie was pleased to hear this, so he scheduled a date for the injection.

One of our PolyLevel experts, Brandon Wiskow, drilled small holes into his concrete driveway to inject the foam. Next, he injected the foam until the driveway was once again level with the garage floor. Lastly, he filled the cracks in the concrete with our Nexus Pro sealant. PolyLevel is a durable, faster and more affordable alternative to traditional concrete repair. Wyllie was pleased with the result and how quick the process was. He can now enjoy level concrete for years to come!

Damon C. in Wayzata, MN had a large crack in the foundation under his garage and through the wall on the side of the garage. Damon knew he needed to repair his foundation before it failed, because replacing a foundation is drastically more expensive. He began researching foundation repair contractors and he came across American Waterworks’ website. He contacted us for a free estimate, so we sent one of our Design Specialists, Chad Johnson, to his home to assess his foundation problem and design a solution. Chad worked with Damon to develop a unique foundation repair plan that best fit his needs. Damon liked Chad’s proposal, so he moved forward with the installation.

Our Foreman, Jose Castillo, and his crew began the process of installing wall anchors by removing concrete in the garage for the anchor installation. Next, they drilled long rods from the outside wall through the soil underneath the garage. From there, they secure the rods on each end by putting on anchor plates and then tightening them. The wall anchors have now permanently secured and stabilized the foundation underneath Damon’s garage. Our foundation repair systems are guaranteed for a lifetime, so Damon is glad he chose a long-term solution that he can trust.

Jeff H. in Minneapolis was concerned about his retaining wall that was severely cracked and bowing. Jeff started seeking out help to solve his foundation problem, and a trusted contractor recommended that he contact American Waterworks to get a free estimate. He contacted us, and we sent our Design Specialist, Shane Nephew, to his home to assess his retaining wall and provide him with a solution. Shane worked with Jeff to design a plan that was the best fit for his needs. Jeff liked the proposal, so he scheduled a date for us to repair his foundation.

Our production team installed two helical anchors through the retaining wall and into the soil. They tightened and secured the anchors, which permanently stabilizes the foundation. The installation only took one day, and now Jeff will never have to worry about that wall giving out. Our foundation repair systems are backed by a lifetime warranty, so Jeff is confident that he chose the right solution for his home.

Terry L. in Minneapolis, MN had a cracked and inward bowing wall in his basement. He was concerned about the pressure it was putting on his foundation, so he started looking into foundation repair contractors. He came across American Waterworks’ website and was interested to learn more about our foundation repair options, so he contacted us for a free estimate. Our Design Specialist, Jeremy Radkte, went to his home to assess his foundation problem and provide him with a solution. Jeremy was able to develop a thorough plan to straighten and secure Terry’s wall. Terry like the proposal and felt that our company was a good fit for him, so he scheduled the installation.

Our production crew installed 6 wall anchors along the bowing wall. Once the anchors were tightened, Terry was pleased with how quickly he saw dramatic improvement in the stability of the wall. Our foundation repair systems are backed by a lifetime guarantee, so Terry is confident that he chose the right solution to protect his home.

Ruth O. in Mound, MN was suffering from water leaking in to her basement. She had been dealing with the problem for quite some time now and was tired of dealing with it. After researching local waterproofing company’s, she got in touch with the waterproofing experts at American Waterworks. We sent one of our Design Specialists, Chad Johnson, to her home to provide her with a solution and a free estimate. Chad worked with Ruth to develop the right waterproofing plan for her and her home. She liked the proposal that Chad developed, so she scheduled a date for our production team to install the waterproofing system.  

Our crew installed our WaterGuard drainage system around the stairs, where the water was leaking in. Then, they installed a SuperSump sump pump and a discharge line to the outside of the home. The water is now properly guided through the drainage system to the sump pump. Then, the sump pump pushes the water through the discharge line and the water is expelled from the home. Our waterproofing system is backed by a lifetime warranty, so Ruth now has peace of mind that her basement will remain dry and that she chose the right solution.

Jon W. in Eden Prairie, MN had a large crack through the concrete on his steps and his concrete had started sinking, causing a trip hazard. He previously had his stoop mud-jacked, but he was having problems again. He started looking for another concrete repair contractor to see what his options were, and he was directed to American Waterworks. He was curious to learn more about our PolyLevel concrete repair, so he contacted us to receive a free estimate. We sent one of our Design Specialists, Rick Weber, to his home to assess his concrete situation and develop a solution. Jon was glad to learn that PolyLevel is a durable, faster, and more affordable alternative to traditional concrete repair, so he scheduled a date for the installation.

Our Foreman, Brandon Wiskow, drilled small holes into the concrete on his stoop where he needed to inject the foam. He injected our PolyLevel into the holes until the concrete slab was level. Then, he sealed the cracks in the concrete with our Nexus Pro sealant, which protects the concrete and gives it a nice, finished look. The process only took about half a day, and now Jon will be able to enjoy level concrete for years to come.

Erik B. in Mound, MN had water seeping into his unfinished basement. Every time they experienced a heavy rain, water would start to pool in their basement. He contacted the waterproofing experts at American Waterworks to receive a free estimate. We sent one of our Design Specialists, Chad Johnson, to his home to inspect his basement and develop a solution. Chad worked with Erik to create a waterproofing plan that was the best fit for his unique basement. Erik liked Chad’s proposal, so he scheduled the installation.

Our Foreman, Juan Pena, installed our WaterGuard drainage system around the perimeter of the basement and our SuperSump sump pump system. The WaterGuard guides water to the sump pump and from there, the water is pumped through the discharge line and it is expelled from the home. Our waterproofing system is backed by a lifetime warranty, so Erik is confident that he chose the right solution to protect his basement for the long-term.

Jacqueline M. in Minneapolis, MN had a bowing foundation wall in her basement. She was concerned about the pressure it was putting on her foundation, so she contacted American Waterworks to receive a FREE estimate. One of our Design Specialists, Shane Nephew, went to her home to inspect the wall and design a solution. After listening to her concerns and needs, he developed a plan to permanently restore her wall using PowerBraces. She was pleased with his proposal, so she decided to move forward with repairing her foundation.

Our Foreman, Juan Pena, and his crew installed 6 PowerBraces along the bowing wall. The PowerBrace is an adjustable beam that stabilizes bowing walls and forces them back into their original position. PowerBraces are sometimes used instead of wall anchors because wall anchors require access to the soil outside and would cause us to cross a property line if that product was installed. The beams are covered with a zinc-coating, so that the beams will not rust or deteriorate over time. Jacqueline was glad that the process was not very disruptive and that they barely take up any space in her basement. She has peace of mind knowing that American Waterworks helped her find a long-term solution for her home.

Josh L. in Minneapolis, MN discovered the adverse effects that radon gas has on people's health and he became concerned because his home had not yet been tested. He started looking for a company to test his home, and he came across American Waterworks at a local home show. He was glad to see that along with concrete repair, basement waterproofing and foundation repair, we also offer radon testing and mitigation.

He gave us a call and we sent one of our Design Specialists, Shane Nephew, to his home to set up the test. 48 hours later, Shane returned to read the results. The results showed that Josh did in fact have unsafe levels of radon in his home. Shane explained the risks of not having a radon mitigation system  installed and he walked Josh through the installation process. Josh wanted to have the system installed as soon as possible, so they scheduled the project. 

Our radon mitigation specialists drilled a hole through the concrete in the basement to create a suction point for the gas. Then, a PVC pipe is inserted which goes up through the house and exits the home through the roof. A fan is installed at the top of the PVC pipe to ensure that the radon gas is being pushed away from the home. The installation took only one day to complete, and Josh is glad he took action to protect his and his family’s health.

Jinyu L. in Maple Grove, MN had a sump pump in her den. She wanted to get rid of the old sump pump and install a new sump pump in her utility room, so it would be out of the way. She contacted us for a FREE estimate, so one of our Design Specialists, Chad Johnson, went to her home to figure out her specific needs. He recommended that we install our TripleSafe sump pump, which is out most reliable sump pump system. She wanted the most protection for her home, so she decided to have the TripleSafe installed.

Our production crew removed the old sump pump and started the process of installing the new one by removing the concrete are creating a hole in the corner of the utility room. They placed the bucket in the hole and filled back the gaps with rock. After they had completely installed the sump pump, they replaced the concrete around the sump pump. The installation only took a couple of hours. Jinyu has peace of mind that she chose our most reliable sump pump and she can enjoy a dry basement for years to come!

Mike S. in Rogers, MN had a stair-step like crack on one of his foundation walls in his basement. He was worried about the underlying problems this could be causing on his home and he wanted a professional to look at it, so he called American Waterworks. Our Design Specialist, Chad Johnson, went to his home to inspect his foundation and design a solution. Mike was pleased with the thorough plan that Chad developed, so he decided to move forward with the installation.

Our production team installed three joist reinforcements and three PowerBraces to permanently stabilize the wall. PowerBraces are strong steel beams that restore a bowing wall or shifting foundation back to its original and structurally stable condition. They can also be installed without disruption to outside soils or landscaping. Mike’s foundation is now restored and our PowerBraces are backed with a lifetime warranty, he is confident he chose the right solution.

Amanda R. in Hamel, MN had multiple sump pumps in her basement that couldn’t keep up with the continuous water leakage. She contacted American Waterworks customer care to receive a Free Estimate. Our Design Specialist, Shane Nephew, met with Amanda to inspect the issue and came up with a solution to resolve the problem. Amanda thought Shane was very thorough and explained everything well, so she signed the offer.

Our Foreman, Tremaine Jackson and his crew exchanged the existing sump pumps with our TripleSafe and SuperPump sump pumps and refurbished the pump in her third sump pump. Our TripleSafe offers three levels of protection and is our most dependable sump pump. The process only took about half the day, and Amanda is now at ease that her basement is protected and taken care of by our waterproofing sump pump system.

Ryan and Calista H. of Long Lake, MN had water seeping into their basement and wanted to get it taken care of as soon as possible. They gave American Waterworks a call to schedule a Free Estimate. Our Design Specialist, Chad Johnson, met them at their home to inspect the problem and come up with a solution. After an in-depth and detailed diagnosis, Ryan and Calista felt very comfortable with Chad's proposal so they followed through with the project.

Our foreman, Cory Sather, and his production crew began the installation by cutting out the concrete around the perimeter of the basement floor to form a trench. Next, our team installed 81 feet of FoamMax around the perimeter of the basement wall. FoamMax is a foam insulation wall protection that prevents humidity and keeps walls from leaking. Then, Cory and our crew installed 90 feet of WaterGuard in the floor trench, filled the open gaps with rock, and replaced the concrete. Our WaterGuard System serves as an underground drain for contaminated water and prevents water clogs. 

To complete the installation, our crew spray 144 square feet of Spray Foam on the tops and bottoms of the FoamMax to make sure it stayed secure. Ryan and Calista were very happy with the outcome, and appreciated all of the hard work! 

Kevin H. of Loretto, MN had water leaking through his pre-existing sump pump, causing him to worry about the value of his home. After doing some research online, he came across American Waterworks and our basement waterproofing projects, so he filled out our online FREE Estimate form. Our Design Specialist, Chad Johnson, went to his home to inspect the problem and come up with a solution. Kevin got all his questions answered so he followed through with the project. 

Our Foreman, Cory Sather, and his production team began the project by cutting out the concrete down the middle of the basement to form a trench. In the trench, our team installed a 35-foot-long interior discharge line. Next, our team broke out the concrete around the pre-existing sump pump and replaced it with our TripleSafe Sump Pump and connected it to the discharge line. Our TripleSafe is the best sump pump in the basement waterproofing industry and provides triple protection. To complete the project, our team covered the open gaps with rock and replaced the concrete. Kevin had a remarkable experience from start to finish and no longer worries about water leaking into his basement! 

Kristina W. of Devils Lake, ND had bowed and cracked walls in the basement of her home, causing her to worry about the structural build and support of her home. She did some research online, filled out an online form, and requested for us to call her. Our customer care department gave her a call and set her up with a FREE Estimate with our Design Specialist, Chad Johnson. Chad went to her home to inspect her problem and come up with a solution to repair her foundation walls. Kristina was confident in Chad's plan, so she went ahead with the project. 

Our Foreman, Patrick Burnes, and his team installed 11 of our GeoLock Wall Anchors. To begin the process, our team dug 11 holes outside of the home and inserted a long, metal rod from the inside of the foundation wall to each hole outside of the home. At the end of each rod, our crew tightened and screwed on a GeoLock Wall Anchor. Our wall anchor system will stabilize a foundation wall by anchoring the walls to the compact soil beyond the foundation. Over time, wall anchors can be tightened by the homeowner to further straighten the walls. To complete the project, our crew backfilled each hole and replaced the soil, making sure the yard looked neater than when they found it. Kristina was happy with the installation! 

Interested in our GeoLock Wall Anchors and how they can help your foundation? Click HERE to learn more!

Ashley N. of Saint Louis Park, MN had water leaking from her pre-existing sump pump, making her worry about water moisture and flooding. She called our office line and set up a FREE Estimate with our Design Specialist, Jared Bruns. Jared went to her home to inspect her problem and come up with a solution. Ashley was confident in Jared's proposal, so she moved forward with the project. 

Our Foreman, Kiko Pena, and his team began the project by breaking out the concrete around the pre-existing sump pump and replacing it with our SuperSump Plus M53 sump pump, which comes with two pumps and is made to keep basements dry for long periods of time. To complete the project, our team covered the open gaps with rock and replaced the concrete. 

To learn more about our sump pumps, click HERE! 

Sue L. needed to reduce the radon levels in her home in Minneapolis. While searching for a radon mitigation company in her area, she found and contacted American Waterworks on Home Advisor. Sue met with design specialist Jesse Williams, who designed a mitigation system that worked for Sue. Our certified radon mitigation specialist, Geno, expertly installed Sue's new system. Sue can rest easy in the knowledge that her home is a much safer and healthier environment.

If you would like to schedule and inspection for your home, please enter your information here or call our appointment center at 1-507-306-1736.

Tim R was looking for a way to reduce the radon levels in his home. He found American Waterworks in an online database and contacted us to schedule a free inspection. Design Specialist Brian Ramirez met with Tim and presented our radon mitigation solution. Tim had met with three other radon mitigation companies, but he liked our solution the best and chose to have our system installed in his home by our certified foreman Dakota. Tim now has peace of mind knowing that his home is safer and healthier.

If you would like to schedule a free inspection for your home, please enter your information here or call our appointment center at 1-507-306-1736.

Jinyu L. of Sycamore, MN constantly was suffering from a leak in the basement resulting in excess water on the basement floor. With a leak in the basement, Jinyu was worried about the floor since it had a wood tile finish. Jinyu then contacted the Appointment Center at American Waterworks to obtain his FREE estimate which entitles him to a free inspection of the issue. Once Jinyu has scheduled his appointment, a Design Specialist then attended his property and completed a thorough inspection of the home to get a better understanding of the issue and produce a proposal that would solve the issue. After the inspection, Jinyu felt confident in the proposal and scheduled a day of installation. 

Our Foreman, Juan, and his crew then started the process by introducing themselves to the homeowner and ensuring the customer that their questions would be answered. Our crew then installed a TripleSafe Sump Pump System. This system was to help the drainage system pump water outside and away from the basement to prevent a flood and to keep it dry and clear. When the job was complete, Jinyu was happy that the issue has been resolved and stress-free that his basement floor will be ruined by the excess water entering his basement.

If you are in a similar situation click Here or give us a call to get a FREE estimate today!

Joel from Mankato, MN, noticed that the concrete slabs in his driveway were settling causing them to become uneven and a portion of the concrete began to crack and crumble. Joel was afraid that, if left unchecked there would be a potential trip hazard. Joel contacted the Appointment Center here at American Waterworks to claim his FREE estimate, which entitles him to a free home inspection by one of our Design Specialists from our Concrete and Radon division. Our Design Specialist was able to attend to his property and began to conduct a full thorough home inspection to get a proper diagnosis of the home and provide Joel with the best solution to solve his issues. Our Design Specialist then proposed to Joel that the best solution is to invest in our PolyLevel and NexusPro solutions. Our PolyLevel injection is a polyurethane foam that is injected beneath the concrete to fill the voids that are caused by soil erosion and help stabilize the concrete slabs. Joel agreed and scheduled the date of installation. 

Our Foreman, Troy, and his crew then began the installation process by strategically drilling holes in the problem slabs to inject the PolyLevel foam. After this process is done, the crew followed by using our NexusPro solution, a silicone-based sealant that seals the joints and cracks to protect the PolyLevel foam from water and water vapor. The NexusPro solution is a tough solution that has a protectant against UV light which prevents it from drying and deteriorating, keeping the concrete slabs connected. 

Joel was satisfied with the job and enjoys his nice and leveled driveway!!

If you're in a situation similar to Joel's, contact us today to speak with someone about scheduling your FREE estimate! 

Hollie from Hopkins, MN was excessive water build-up in her basement, causing her wall along with her carpet to constantly be moist and wet. She then contacted the Appointment Center here at American Waterworks to schedule her FREE estimate, which entitles her to a full home inspection. After a thorough inspection of the property, our Design Specialist proposed to Hollie that the best solution is to invest in the TripleSafe Sump Pump System and CleanSpace Vapor Barrier. Hollie loved the proposal and proceeded with the project by setting an installation date. 

Our Foreman and his production team then began the project by breaking out a drilling a 2'x2'x2' hole and installing a TripleSafe Sump Pump. The TripleSafe Sump Pump is the best sump pump we provide for homeowners, which provides three levels of protection, and solves all three water problems in one basket. Once installed the team then applied a CleanSpace Vapor Barrier to keep the wall dry and moisture-free. The CleanSpace barrier also prevents mold from growing in the basement. Once the products were installed the production team then covered the opened gaps with river rock to prevent sediment from entering the sump basket and a layer of concrete to have a more finishing look. The homeowner loved the new and improved basement and is worry-free that her basement would experience any water build-up!

If you are experiencing a similar issue please contact American Waterworks today and schedule your FREE estimate!

Maggie and Greg from Hopkins, MN noticed that their basement walls started to bow and crack affecting the exterior of the home. This raised major concerns for Maggie and Greg for their foundation. They reached out to the Appointment Center here at American Waterworks and claimed their FREE estimate, entitling them to a free home inspection. Once claimed and set, our Design Specialist then attended to their property and began to conduct a thorough inspection of the property. After a thorough inspection, our design specialist recommended that Maggie and Greg invest in our GeoLock Wall Anchor system.  The homeowners agreed and proceeded with the project by scheduling and installation date. 

Our Foreman along with their production team then began the project by digging five holes 12 feet away, along the problem wall. Once dug a metal rod is drilled into the problem wall until it is exposed by the hole. Then the team proceeds to add a GeoLock anchor plate which allows the wall to return to its original position over time. After the installation, the production crew proceeds to backfill the holes and replace the soil back to its original look. Maggie and Greg loved the new and improved basement and are worry-free that the foundation of their home is in danger!

If you have a similar concern, schedule your FREE estimate today!

Trisha from Hopkins, MN began to notice excessive water build-up in her basement, along with constant moisture. She was worried that it would worsen and cause damage to the appliances and personal items she had in her basement. Trisha then contacted then the Appointment Center here at American Waterworks to claim her FREE estimate, entitling her to a free home inspection by one of our Design Specialists. Once the appointment is set and scheduled, our Design Specialist attended her property and began a full thorough inspection. Once completed with the inspection our Design Specialist recommended Trisha our TripleSafe Sump Pump, Waterguard, and CleanSpace Vapor Barrier. Trisha agreed with the proposal and started the project soon after. 

Our Foreman and their assigned crew then attended their property and began the project by installing a CleanSpace and the WaterGuard system. The CleanSPace Vapor Barrier is a tarp-like material that helps catch any water entering the basement, directing it to the water guard. Our Water Guard drainage system lies below the basement floor, next to the footing of the house to catch the water that is collected by the CleanSpace, directing it to the sump basket. To finish the project the crew then installs the TripleSafe Sump Pump to drain all the excess water that is entering the basement. The TripleSafe Sump pump is the best sump pump we offer that provides protection against all three water problems that a home may experience.

If you're experiencing similar issues to Shirley, contact us today to schedule your FREE estimate with one of our Design Specialists! 

Tracey from Hopkins, MN noticed that the concrete slabs forming the pathway to her home have been experiencing settlement and have been forming some potential trip hazards. Tracey was worried that if left unchecked the problem may worsen. Tracey then called the Appointment Center here at American Waterworks and claimed her FREE estimate. The free estimate entitles Tracey to a full home inspection. Once the Appointment was set and scheduled, our Design Specialist then attended her property and began to conduct a thorough inspection of the property. After a thorough inspection, our Design Specialist proposed to Tracey that the best solution was to invest in our PolyLevel and NexusPro solutions. Our PolyLevel injection is a polyurethane foam that is injected through the problem slabs filling the voids that were left behind due to soil erosion and stabilizing the concrete. Tracey agreed with the proposal and proceeded to schedule a day of installation. 

Our Foreman and his crew then began the installation process by strategically drilling holes through the problem slab to inject the PoleyLevel foam. After this process is done, the crew continued the process by using NexusPro Solution, a silicone-based sealant that seals the joints and cracks to protect the PolyLevel foam from any water and water vapor. The NexusPro solution is a tough solution that has a protectant against UV light which prevents it from drying and deteriorating, keeping the concrete slabs connected. 

Tracey was satisfied with the job and enjoys his nice and leveled driveway!

If you're in a situation similar to Joel's, contact us today to speak with someone about scheduling your FREE estimate! 

Katie was having moisture problems in her basement. She was beginning to notice a musty odor, accompanied by a damp feeling, and mildew forming along baseboards. She was concerned that she was beginning to see signs of a basement waterproofing issue. Katie researched the best remedies for her problem and came across the services we offer.

When she called into our office, we set her up with our FREE estimate, entitling her to a free, no-obligation 3-hour estimate from one of our Design Specialists from our basement waterproofing and foundation division. After her appointment was scheduled, our Design Specialist, Nick, headed out to her property to complete his inspection. Once he had concluded his walkthrough, he informed Katie that her issue was stemming from water entering the property, probably through porous holes and cracks in the foundation. He went on to say that while Katie wasn't experiencing dramatic amounts of water in the space, she shouldn't brush her problem off. He explained that a wet basement can lead to mold and mildew, creating unhealthy air circulating through the home. He recommended our AprilAire Dehumidifier to create healthy air and reduce the number of viable viruses in the air. She quickly agreed to this option and work began shortly after. 

Our Foreman, Raul, and his crew installed her dehumidifier quickly and efficiently. Now, Katie can enjoy her space without the intruding musty smells and damp feelings! If you're experiencing a similar issue as Katie, click HERE to schedule your FREE estimate with one of our System Design Specialists and see if the AprilAire is the right solution for your household. 

A homeowner in Jud, ND, discovered a crack running between blocks on their basement walls. Knowing their structure was at risk, the homeowner sought a solution. During their search, the homeowners discovered highly-rated American Waterworks. While on our website, the homeowners signed up for their FREE estimate. Our Design Specialist, Kole, traveled to the home and inspected the foundation walls. Following his inspection, Kole suggested that the homeowners stabilize the struggling walls. The homeowners agreed and asked if the walls could be straightened as well, which American Waterworks agreed to. Before the crew started the installation, the homeowners dug the ground outside the east and south wall foundation walls. Once our Foreman, Kevin, and his crew arrived, they began installing the GeoLocks on the east and south basement walls. Since the ground was already dug out, the crew could install the Geolock channel anchor outside the home. Then, the crew attached the tube from the outside channel to the inside channel. After the channels were connected, the crew covered the outside channel. Next, the crew installed the SentrySeal Waterproofing Membrane on the outside foundation walls. On the inside, the crew began installing the SilverGlo insulation panels, insulation that boasts a radiant barrier and reflects heat into the home. The SilverGlo is installed on the floor framing system, also known as the rim joist, for maximum energy saving. The crew completed the installation and stabilization with ease. The homeowner was relieved to know their home was sturdy and properly insulated. If you are experiencing a similar issue, sign up for your FREE estimate today!

A homeowner in Saint Anthony, MN, was strolling into their home when they saw a substantial difference in their driveway slabs. Wanting to avoid further issues, the homeowners sought to have the driveway repaired. The homeowner wanted the best concrete repair service to complete the job, so they went to American Waterworks' website and signed up for their FREE estimate. After setting the appointment, our Design Specialist, Gary, traveled to the home to complete an evaluation. Following his detailed evaluation, Gary recommended the homeowners lift and level the patio, driveway apron, and four slabs below the apron. After hearing his recommendations, the homeowners agreed and project preparations began. 

Our Foreman, Troy, and his crew arrived at the home and immediately began work. To start, the crew used PolyLevel to lift the sunken concrete. PolyLevel is a polyurethane foam injection solution that is used to restore the appearance and safety of concrete without the mess and cost of replacement. To begin the installation, the crew strategically drills small 5/8" holes in the concrete slabs. Then, the injection ports are installed in those small holes. Next, the polyurethane foam is injected below the concrete to fill the voids and raise the concrete slab. Finally, the holes and control joints are sealed, leaving lifted concrete. After the driveway is lifted, the crew moves to filling all the joints with NexusPro. The NexusPro solution is a silicone-based sealant for joints and cracks that is formulated to provide long-lasting flexibility and stand up to harsh weather conditions. The crew installs the NexusPro by drilling, smoothing, and preparing the cracks with a non-absorbent backer rod filler. Then, the NexusPro is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a finished appearance. The homeowners were happy with the crew's excellent job. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Champlin, MN, grew concerned about the driveway slabs beginning to overlap with one another. Knowing that they needed professional assistance, the homeowner began looking for the best concrete lifting and leveling company in their area. After looking through several companies in the area, the homeowner found our website. After seeing the five-star reviews, the homeowner signed up for their FREE estimate on our website. Once the appointment was made, one of our Design Specialists, Kyle, arrived at the home to begin his estimate. Following his detailed estimation, Kyle found that the sidewalk and driveway were showing signs of sinking. Kyle came up with a solution that would fix all of the homeowners' concerns. After hearing the solution, the homeowner decided to go with Kyle's plan. Once they agreed, the plans were then directed to the assigned crew, and production preparations began.  Our Foreman, Dylon, and his crew arrived at the home to begin construction. First, the crew focused on repairing the sinking concrete around the home. To raise the concrete, the crew utilized the PolyLevel, a polyurethane foam injection solution.  install the PolyLevel, the crew strategically drills small 5/8" holes into the concrete slab. Next, the injection ports are installed in the small holes. Then, the polyurethane foam is injected beneath the concrete to fill voids and raise the slab. Finally, the holes and control joints are sealed. Once the concrete slab was lifted, the crew shifted their focus to filling the joints and cracks with the NexusPro Joint Sealant, a silicone-based sealant for joints and cracks that is specially formulated to provide long-lasting flexibility and stand up to harsh weather conditions. The NexusPro is inserted in the prepared joint and then is detailed with a thin layer of sand to give a finished appearance. The crew successfully installed all of the products and lifted the concrete to match the level of the garage. The homeowners were pleased with the excellent work accomplished by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

After a heavy rain, a homeowner in Eden Prairie, MN, found that their basement showed signs of water intrusion. To prevent any further damage, the homeowners began searching for an expert opinion. On their way home one evening, the homeowners noticed several American Waterworks yard signs throughout the neighborhood. Taking notice, the homeowners decided to do some investigating and see all the services we offer. Impressed by our previous work, the homeowner decided to sign up for their FREE estimate. As soon as the details were finalized, we sent one of our Design Specialists, Eric, to inspect the status of the level of water damage in the basement. Following his analysis, Eric found that was seeping into the basement and needed to be repaired. Eric recommended several versions of his solution to the homeowners and they picked the one that was best fit for their situation. Then, Eric sent the plan to the assigned crew and production commenced. Our Foreman, Jeremiah, and his crew arrived at the home and started by prepping the basement for the WaterGuard installation. The WaterGuard is an award-winning, below-floor drain that rests in a bed of drainage stone on top of the foundation footing. To begin the installation, the crew digs a channel along the footing of the west wall. Once the channel is dug, the crew can put the WaterGuard into place. Once in place, the crew covered the WaterGuard channels with rocks and cement. Next, the crew shifted their focus to installing the SuperSump Plus to tie into the current water system. The SuperSump Plus is engineered to assist in keeping the basement dry and healthy for extended periods and in heavy water intrusion. To prevent freezing or clogged discharge lines, the crew installed the IceGuard, an anti-freezing fitting that is installed on the outside of your home and ejects water away from the foundation. To finish the project, the crew installed CleanSpace along the entire west wall. CleanSpace is a 100% waterproof plastic vapor barrier that is perfect for unfinished basement walls. The crew installs CleanSpace by mechanically attaching them to the walls with plastic rilled-in fasteners, so it won't fall off the wall. Once the crew finished the installation, they cleaned up their job site and left the home. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Excelsior, MN, tripped going towards the front door of their home one evening. Not wanting anyone else to fall, the homeowner wanted to have the sidewalk repaired. While looking through a shopper, the homeowner saw one of our advertisements and it caught their eye. After seeing our impressive before and after concrete repairs, the homeowner decided to call our Appointment Center and sign up for their FREE estimate. Once the appointment details were settled, we sent out one of our Design Specialists. When they arrived, the Design Specialist determined that the concrete was sinking and was causing all these issues. Furthermore, the Design Specialist offered a solution that would solve their sinking issues. The homeowners agreed and the plans were ready to be sent to the assigned crew. After receiving the plans, the crew traveled to the home to begin the repair process. To begin the project, the crew began lifting and leveling the sidewalk and driveway using the PolyLevel, a polyurethane foam injection solution. The crew begins by strategically drilling small holes throughout the concrete and sidewalk. Next, injection ports are inserted throughout the small holes. Then, the polyurethane foam solution is injected underneath the affected concrete. Finally, the holes are covered and smoothed to give it a finished appearance. As soon as the PolyLevel installation was complete, the crew shifted to fixing all the cracks and joints throughout the concrete. To fill these cracks and joints, the crew used the NexusPro Solution, a silicone-based sealant for joints and cracks that is specially formulated to provide long-lasting flexibility and can stand up to harsh weather. The crew installs the NexusPro by inserting the sealant into the prepared crack or control joint. Then, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the crew finished the crack and joint repair, they cleaned up the job site and moved on to the next job. The homeowners were relieved to know they did not need to replace their concrete. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Hamel, MN, disliked the appearance of their driveway. Several cracks and overlaps were scattered throughout the concrete. Knowing they could not solve this issue themselves, the homeowner decided to look for professional assistance. During their search, the homeowners happened to find past showcases of our concrete repair work. Impressed by our work, the homeowner decided to sign up for their FREE estimate on our website. Once the appointment was set, we sent one of our Design Specialists, Lance to assess the status of the concrete. Following his detailed inspection, Lance discovered the driveway was beginning to sink. Lance provided the homeowners with a recommended plan of action that would solve all the issues throughout the driveway. After going through all the possible courses of action, the homeowners found a solution that fits their home and situation. Lance forwarded the directions to the assigned crew and preparations began. Our Foreman, Dylon, and his crew received the plan of action and made their way to the home. Upon arrival, the crew began by installing the PolyLevel, a polyurethane foam injection solution, underneath the affected concrete on the driveway. To install the PolyLevel, the crew strategically drills small holes throughout the concrete. Next, injection ports are installed in those small holes. Then, the polyurethane foam is injected beneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. Once the PolyLevel install was completed, the crew moved on to filling the various cracks and joints in the driveway. To fill those joints and cracks, the crew used the NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and can stand up to harsh weather conditions. The crew installs the NexusPro Sealant by drilling, smoothing, and preparing the crack with a non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the crack or control joint. Following the crack repairs, the crew cleaned up the job site and moved on to the next job at hand. The homeowners were thankful for the wonderful work completed by the crew. If your driveway is facing a similar issue, sign up for your FREE estimate today! 

A homeowner in Hopkins, MN, noticed their sump pump was not acting normally. Instead of ignoring the issue, the homeowner decided to have a professional examine the current status. Knowing they wanted the best of the best, the homeowner searched for the highest-rated waterproofing company. One of the first companies to show up was us, American Waterworks. After doing some further research into our company, the homeowner decided to call our Appointment Center and sign up for their FREE estimate. Once the estimate details were finalized, one of our Design Specialists, Dylan, was sent to inspect the sump pump's status. Following his comprehensive inspection, Dylan confirmed that the sump pump needed to be replaced. Additionally, Dylan recommended that the room be further waterproofed. After considering his offer, the homeowner agreed and the plans were sent to the assigned crew. Our Foreman, Raul, and his crew were assigned this job and received the plans. To begin the project, the crew started by digging channels to place the WaterGuard, a below-floor drain that rests in a bed of drainage stone on top of the foundation. Once in place, the crew covered the WaterGuard with rocks and cement. The floor is then smooth to give a finished look. Next, the crew took out the old sump pump and replaced it with the SuperSump, one of our premier sump pump systems. On the outside of the home, the crew installed the IceGuard, an anti-freeze fitting that ejects water away from your foundation, on the discharge line. After the IceGuard was installed, the crew went on to install CleanSpace on the basement walls. CleanSpace is a 100% waterproof plastic vapor that is ideal for unfinished basements. The crew installs CleanSpace by mechanically attaching them to walls by using plastic drilled-in fasteners. The crew finished the job and cleaned up their site. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Long Lake, MN, was working on some yard work when they discovered a large crack growing on the outside of their garage's foundation. Concerned by this finding, the homeowner immediately searched for a solution. During their search, the homeowners stumbled across our five-star reviews. Once they saw the many positive reviews, the homeowner decided to look into our company more. After completing further research, the homeowner decided to sign up for their FREE estimate with us. One of our Design Specialists, Nick, arrived at the home to begin his inspection. Following his detailed inspection, Nick determined that the garage wall needed to be permanently stabilized. Nick recommended some solutions that would solve the homeowner's issues. After contemplating their options, the homeowner agreed with Nick's recommendations, and production commenced. Our Foreman, Jeremiah, and his crew received the plans and began the stabilization process. To solve the crack issue, the crew installed five GeoLocks along the outside of the south foundation wall. To install the Geolocks, the crew begins by digging a small hole in the ground. Once the hole is dug, the crew places its first anchor into the ground. Once the anchor is in place, the crew inserts a small steel pole through the ground to connect to the interior GeoLock anchor. Once the anchors are connected, the crew can cover the hole and clean up their job site. After the crew completed the project, the homeowners investigated the finished product. Impressed by our crew's work, the homeowners left us a glowing review and were thankful for the excellent job completed. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Loretto, MN, decided it was time to repair the large crack between their front steps and driveway. Knowing they needed an expert, the homeowner began searching for the best solution for their home. During their search, the homeowner found that American Waterworks does concrete lifting and leveling. Instead of replacing the whole slab, the homeowner decided to sign up for a FREE estimate with us and attempt to repair the concrete. After the estimate details were finalized, we sent out a Design Specialist to investigate the status of the concrete. Following his inspection, the Design Specialist found that the concrete was sinking into the ground. Once he made this discovery, the Design Specialist suggested that the concrete be lifted and various cracks be repaired. After deliberating all their options, the homeowners determined that this was their best option. The plans were then directed to the assigned crew and the project preparations began. Once our crew arrived at the home, they started by utilizing the PolyLevel, a polyurethane foam injection solution,  to lift and level the concrete. To install the PolyLevel, the crew strategically drills small holes throughout the concrete. Next, injection ports are installed in those small holes. Then, the polyurethane foam is injected beneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. Once the PolyLevel install was completed, the crew moved on to filling the various cracks and joints in the concrete. To fill those joints and cracks, the crew used the NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and can stand up to harsh weather conditions. The crew installs the NexusPro Sealant by drilling, smoothing, and preparing the crack with a non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the crack or control joint. The homeowners were impressed by the wonderful job completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Maple Grove, MN, grew concerned after finding some cracks and gaps in their foundation walls. Wanting to prevent any further damage, the homeowner decided to have an expert inspect their foundation walls. After going through all the foundation repair companies in their area, the homeowners decided that American Waterworks was the best option for them. Once they decided, the homeowner visited our main website and signed up for their FREE estimate. Once the estimate details were lined up, the homeowner prepared for our Design Specialist, Nick, to arrive. Once Nick arrived, he began the full examination of the foundation walls. After he examined the status of the walls, Nick warned the homeowners that the wall was beginning to bow inwards. To stop the wall from bowing further, Nick suggested that the homeowners permanently stabilize their walls with CarbonArmor strips, a state-of-the-art solution that is used to fix cracked and bowing foundation walls. To start the installation, the crew cleans the sections where the CarbonArmor will be placed. Once the walls are cleaned, the crew masks off each carbon fiber strip location and saturates the masonry with epoxy. Then, the CarbonArmor is set into place and becomes a part of the wall structure. Additionally, the CarbonArmor can be pained over and become hidden from plain sight. The crew installed four CarbonArmor strips along the south foundation wall. Once the crew put all the strips into place, they cleaned up the site and left the home. The homeowners were impressed with the job completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Minnetonka, MN, noticed their driveway was starting to become uneven. Having a feeling this was not a good sign, the homeowner decided to have a professional visit their home to inspect the concrete. The homeowner looked through all the concrete repair companies in their area, but only one stood out American Waterworks. Once they visited our website and learned more about our company, the homeowner knew that we were the best fit for this job. The homeowner signed up for their FREE estimate and prepared for the arrival of Michel, one of our Design Specialists. Once Michel arrived, he began his survey of the concrete. After completing his survey, Michel concluded that the concrete was sinking into the ground. Michel warned the homeowner that the sinking would only worsen if not fixed and offered a solution that would fix the issue. Knowing they wanted this issue fixed, the homeowners agreed on Michel's solution and project preparation began. Our Foreman, Patrick, and his crew arrived at the home to begin production. First, the crew focused on lifting the sinking concrete with PolyLevel, a polyurethane foam injection solution. The crew installed the PolyLevel by strategically drilling small holes throughout the concrete. Next, injection ports are installed in those small holes. Then, the polyurethane foam is injected beneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. Once the PolyLevel install was completed, the crew moved on to filling the various cracks and joints in the concrete. To fill those joints and cracks, the crew used the NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and can stand up to harsh weather conditions. The crew installs the NexusPro Sealant by drilling, smoothing, and preparing the crack with a non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the crack or control joint. After all the cracks and joints were filled, the crew cleaned up the front yard and traveled to their next job. The homeowners were thrilled with the work completed by the crew. If you are experiencing something similar, sign up for your FREE estimate today!

A homeowner in Mound, MN, knew they could no longer push off their foundation repair needs. Having a hunch this would be a larger job, the homeowner knew they wanted the best foundation repair company in their area. Overwhelmed by all the options, the homeowner decided to go to HomeAdvisor to compare all the options near them. One of the first companies to catch their eye was us, American Waterworks. After further research into our company, the homeowner was impressed by the services we provide and the high quality of work we complete. The homeowner visited our website and signed up for their FREE estimate. Once the estimate details were finalized, we sent Nick, one of our Design Specialists, to complete the inspection. Nick arrived and began the detailed inspection of the foundation. After he completed the inspection, Nick determined that the foundation required permanent stabilization, and the concrete needed to be lifted and leveled. Nick suggested a solution that would solve all the structural and floor issues. The homeowners considered their options and decided to go with the suggested plan. Once the plans were approved, they were sent to the assigned crew, and production preparations began. Our Foreman, Dylon, and his crew arrived at the home to begin production. First, the crew began production by installing three GeoLocks, an innovative wall anchor system, on the northwest wall. The GeoLock anchors permanently stabilize your foundation wall by anchoring to your interior walls to the hard-pack untouched soil beyond your foundation. First, the crew excavates a small section of the lawn to place the first GeoLock anchor. Then, the crew directs a small steel pole through the soil to connect to the interior wall anchor. Once the anchors are connected, the crew can put the removed lawn back into place. After the GeoLock installation, the crew shifts their focus to the concrete issues. The crew focused on lifting and leveling the concrete with the PolyLeve, a polyurethane foam injection serum. To install the PolyLevel, the crew strategically drills small holes throughout the concrete. Next, injection ports are installed in those small holes. Then, the polyurethane foam is injected beneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. Once the PolyLevel install was completed, the crew moved on to filling the various cracks and joints in the concrete. To fill those joints and cracks, the crew used the NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and can stand up to harsh weather conditions. The crew installs the NexusPro Sealant by drilling, smoothing, and preparing the crack with a non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the crack or control joint. The crew completed all the repairs. The homeowners were grateful for the wonderful work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Osseo, MN, was sitting on their back patio when they noticed their sections of concrete were colliding with one another. Unsure of the cause, the homeowner wanted to have an expert come check it out. The homeowners began researching for the best concrete repair company in their area. After searching, the homeowner came across our stunning project photos. The photos were enough for the homeowners, so they decided to reach out to our Appointment Center and sign up for their FREE estimate. Once the estimate details were finalized, we sent one of our Design Specialists to assess the cause of the concrete issues. The Design Specialist determined that the back patio and garage concrete were beginning to sink. To stop further sinking, the Design Specialist suggested that the concrete be lifted and leveled. Not wanting to replace either slab, the homeowner decided to go with the Design Specialist's recommendations. The plans were then sent to the assigned crew and production preparations began. Our Foreman, Tyler, and his crew arrived at the home to begin repairs. First, the crew focused on lifting and leveling the concrete in the garage. To lift and level, the crew utilized the PolyLevel, a polyurethane foam injection solution. To install the PolyLevel, the crew begins by strategically drilling small holes around the concrete slab. Once the holes are drilled, the crew installs small injection ports inside. Next, the polyurethane foam is injected below the concrete to fill voids and raise the slab. Finally, the holes and control joints are sealed. The crew repeats this process underneath the back patio concrete. Once the PolyLevel is installed everywhere it needs to, the crew cleans up their site and moves on to the next project. The homeowners were delighted by the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Rogers, MN, was walking into their home when they tripped over the uneven slabs. Concerned this issue would worsen, the homeowner began looking for a solution. Knowing they could not solve this issue himself, the homeowner looked into professional companies around their home. The homeowner came across our past work and was impressed enough to sign up for their FREE estimate. Once the appointment was made, we sent one of our Design Specialists, Kevin, to diagnose the issue with the sidewalk. Following his detailed inspection, Kevin determined that the cause of the issue was the concrete sinking. Kevin proposed a solution that would solve the homeowner's issues and prevent any further sinking. The homeowners agreed to Kevin's proposal and production commenced. Our Foreman, Ryan, and his crew arrived and began by installing the PolyLevel, a polyurethane foam injection solution, to lift the sinking concrete. To install the PolyLevel, the crew begins by strategically drilling small holes around the concrete slab. Once the holes are drilled, the crew installs small injection ports inside. Next, the polyurethane foam is injected below the concrete to fill voids and raise the slab. Finally, the holes and control joints are sealed. The crew shifted their focus to filling the joints in the concrete. To replace the joints, the crew utilized the NexusPro Sealant, a silicone-based joint sealant. The NexusPro can provide long-lasting flexibility and can stand up to harsh weather conditions. The crew installed the NexusPro by drilling, smoothing, and preparing the joint with a non-absorbent backer rod filler. Then, the NexusPro is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. The crew finished the project and left the home. The homeowners were relieved to know their concrete was saved without being totally replaced. If you are having a similar issue, sign up for your FREE estimate today! 

A homeowner in Wayzata, MN, was enjoying their patio one evening when they tripped going into their home. While investigating what they tripped over, the homeowner found a significant gap between their front door and patio. Unsure of the cause, the homeowner decided to look for professional assistance. Preferring to repair the concrete, the homeowner searched for a company to provide them with those services. During their search, the homeowner stumbled across our high ratings and decided to look further into our company. After seeing we offer the services they desire, the homeowner signed up for their FREE estimate on our website. Once the appointment was set, we sent one of our Design Specialists to diagnose the concrete issue. After the Design Specialist completed the analysis, they determined the concrete patio was sinking causing the level difference. Once they knew the issue, the Design Specialist could devise a solution to fix the sinking issue. The Design Specialist shared their recommendations with the homeowners and they agreed to their plan. Once the plan was agreed upon, the plans were sent to the assigned crew and production began. Our Foreman, Ryan, and his crew arrived at the home and began by installing the PolyLevel, a polyurethane foam injection solution. The PolyLevel will restore the appearance and safety of your concrete without fully replacing the concrete. To install the PolyLevel, the crew strategically drilled small holes in the slab, and injection ports were placed in those holes. Next, the crew inserts the polyurethane foam underneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. After the PolyLevel was inserted, the crew shifted their focus to replacing the joints near the home. To fill the new joints, the crew utilized the NexusPro Joint Sealant, a silicone-based sealant. The crew successfully filled all the cracks and joints throughout the patio and cleaned up the job site. The homeowner was relieved to know their concrete was properly repaired. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner from Minneapolis, MN was beginning to notice stair-step cracks running down the far side of his garage wall. As the crack began to grow, he got more and more worried as he knew that a failing wall would lead to structural integrity, compromising the safety and resale value of the home. Wanting to do diligent research, he began to search for companies that would help him fix the situation before it was too late. Once he came across our website, he knew we were the company for the job. He called into our office and we set him up with his FREE, no-obligation estimate.  A few weeks later our Design Specialist, Nick Skillman, headed out to the home to take a look and see what we could do. After his thorough inspection, Nick was ready to make his recommendation. Nick wanted to use our GeoLock C-Channel Anchors to fix the situation. He explained that our C-Channel and Geo-Lock anchors are designed to repair bowed, buckled, and tilting foundation walls. This proven repair technique is faster, less disruptive, and much more affordable than foundation wall replacement. The homeowner agreed and work began shortly after. 

Our Foreman, Kiko, and his crew showed up a few weeks after the estimate appointment. First, they began by measuring the proper distance for the anchors to be on the wall. Next, they excavated pieces of the yard beyond the foundation so the anchors had nicely compacted virgin soil to be anchored too. Then they drilled holes through the foundation, connecting the anchor plate on the exterior with the inside c-channel. Finally, they tightened the anchors and backfilled the excavated areas of the yard. In total, Kiko and his crew ended up installing 4 anchors along the problem wall. Once the job was completed, our customer was happy to know his foundation worries were in the past. 

If you're facing a similar issue, or are worried about your foundation, contact us today to schedule your FREE estimate! 

A homeowner in Minneapolis, MN, was enjoying her basement when she made an alarming discovery-her basement wall was cracking! Wanting to address the issue sooner rather than later, she began to search for companies in her area that could help her with the project. She stumbled upon our website and decided to call in and claim her FREE, no-obligation estimate. A few weeks later, our Design Specialist, Rick, was scheduled to head out to her home to complete his thorough inspection. Once Rick's walk-through was complete, he was ready to make recommendations as to how we could help. Rick suggested using our C-Channel and Geo-Lock Anchors to correct the problem. Rick explained that channel anchors are a versatile, effective system that can stabilize walls that are bowing, tipping, pushing in at the bottom, tilting in at the top, or showing similar signs of failure. They are installed with minimal disturbance to your lawn and landscaping, often in a day or less. The homeowner agreed with Rick's recommendation and the project was scheduled.

Our Foreman, Victor, and his team arrived at the job site a few weeks later and immediately got to work. First, the team looked at the interior wall and verified Rick's measurements. Next, they excavated holes outside, beyond the foundation, so the anchors had hard-packed virgin soil to anchor to. Next, the team drilled holes into the basement wall and ran a long steel pole through the hole to connect to the anchor outside. They then mounted the channel anchors and secured them to the floor to address the shearing of the wall. Finally, they tightened the anchors and backfilled the holes. Once the job was completed our homeowner was happy to know that her foundation concerns were a worry of the past! 

If you're facing a similar issue or have concerns about your home's foundation, click HERE to claim your FREE, no-obligation estimate and take the first steps towards reclaiming your space! 

A homeowner in Maple Grove, MN, was worried about the safety of their foundation. Although it did not seem like a huge issue, the homeowner knew they needed an expert opinion. While reading Shopwise MapleGrove, the homeowner saw one of our eye-catching advertisements. The homeowner saw they offer foundation repair services, so they decided to call in and sign up for their FREE estimates. After the details were finalized, Daniel, one of our Design Specialists, traveled to the home to begin the estimation. Once Daniel completed the estimate, he found that the wall was showing early signs of wall failure. To stop the failure from continuing, Daniel suggested stabilizing the struggling walls with GeoLock anchors, our innovative wall system. The homeowner knew this was their best option, so they agreed with Daniel's suggestions. The plans were sent to our Foreman, Luis, and his crew, so they could start production preparations. When they arrived, the crew installed 28 GeoLock anchors around the entire foundation perimeter. The crew installed the GeoLocks by digging a section of the ground to place the first GeoLock anchor. Once the GeoLock is in place, another anchor is attached to the interior wall. Both GeoLocks are connected by a small, steel pole direct through the ground. Once the GeoLocks are secured, the soil is put back on top of the ground. Along with the GeoLock installation, the homeowner asked that the tightening kit be included as well. This will allow the homeowner to straighten their walls over time. As soon as all the products were installed, the crew put the basement back together and left it as good as new. The homeowner was grateful for the work done by the crew and relieved to know their foundation was stable. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner was enjoying their fireplace in their basement when they noticed a puddle of water as they got up. Worried about what that could mean for their home and how the damage could lead to more problems, they began to research companies offering water proofing services in the area. Seeing American Waterworks pop up on their search page, they decided to click in and see what we were all about. They discovered our FREE estimate services and liked the idea of having a professional to talk through what the issue was before committing to a product installation. They contacted our team and set up a free estimate with our Design Specialist, Jesse Williams, who visited the home to see what the problem was. After seeing the water damage in the basement, Jesse knew what would stop the issue and prevent further problems from happening. He explained to the homeowners that installing our WaterGuard system was the best course of action to solve this particular issue because the unique shape and large drain openings of WaterGuard® aid in preventing clogs in the system. The homeowner agreed to the product installation and the project started a few weeks later. When our Foreman, Juan Pena, and his team went out to the home to begin the installation, they began by hanging plastic so that dust wouldn't escape the work area. Next, they jackhammered the concrete next to the leaky wall and dug a trench for the WaterGuard to sit in. They connected the WaterGuard to the already existing sump pump. Finally, they covered the WaterGuard in a fresh layer of concrete to hold it in place. Juan and his team ended up installing 24 ft. of the product into the home. Now this homeowner can enjoy their basement and fireplace area once again!

If you feel like you have noticed a similar problem in an area of your home, take action and schedule your FREE estimate service today.

In the Minneapolis, MN area, a homeowner had become increasingly concerned about the shape of his driveway. It became especially clear to him when an unusually large crack had more recently formed near the driveway and front step of his home. Not wanting this to be a safety hazard for any visitors or himself, he began his research on companies in the surrounding area that could help him out. There was one name that stood out to him in his searching, American Waterworks. Not only did our website provide him with helpful information and positive reviews of past work we had done, but our FREE no obligation estimate service was appealing to him. He was interested in meeting with an expert to hear a detailed explanation of the process and he scheduled an appointment. We sent over Design Specialist, Mike Dexter, to take a look and discuss things over with the homeowner. After agreeing to a plan that would restore his driveway back, Mike sent the information to one of our Formen, Ryan Trogstad, and his crew. When the crew arrived at the site weeks later to carry out the installations, they first began with PolyLevel. They started by drilling small holes throughout the driveway and inserting ports connecting to below the concrete surface. The polyurethane foam was then filled through the ports to fill voids and lift the sinking concrete slabs. The joints and large cracks in addition to the drilled holes were then sealed with NexusPro sealant, a durable and long-lasting solution for damaged concrete. Next, a sprinkle of native sand was applied on top to add a pleasing finish to the sealant. Finally, the crew finished off the job by applying a thin layer of SealantPro on top of the entire driveway to prevent future cracking, discoloration, and flaking. The homeowner was overjoyed to have these issues fixed and thankful for the work our crew did on his driveway.

If you are facing similar problems on your driveway, you know who to contact! American Waterworks wants you to schedule your FREE estimate today.

A homeowner in Maple Grove, MN was enjoying his front yard area during a warm day when he realized just how large the gap in his front stoop had gotten. He decided to reach out to American Waterworks for a FREE no-obligation estimate, as he had heard many great things about our services from a neighbor. When we sent over one of our Design Specialists, Kyle Peters, to the site, Kyle informed the homeowner that the reason the stoop had a large gap was actually due to the sunken sidewalk. The homeowner was surprised by this, and Kyle assured him that this still was a fixable problem. Kyle drew up the plans for the installations and after they were approved, preparations for the actual project began. Our Foreman, Domanik Adams, and his crew members arrived at the home with the needed products and started the process. They began by drilling small holes throughout the sidewalk slabs and inserted ports through them to reach the empty space below. They carefully performed the lift by filling the ports with our PolyLevel, a high-density polyurethane formula to stabilize and lift the sinking concrete. Next, they used NexusPro, a durable and flexible sealant to fill in the holes and the now smaller gap below the stoop. Finally, the crew laid a thin layer of native sand on top of the NexusPro to finish off the project and give the area a smooth look. The homeowner was impressed with the efficiency of the team and was pleased with the final result of his sidewalk and stoop area. 

If you are in a similar situation with your stoop, you know who to contact! We're eager to help you get it back up to perfect condition, starting with our FREE estimate services.

A homeowner in Minneapolis, MN noticed how badly some areas of his front walkway had sunken and cracked. Not wanting to leave the problem unattended to, he began looking for a concrete repair company that would help his situation. His search was cut short once he found the American Waterworks website and saw that we offered FREE no-obligation estimates for our customers. He was eager to schedule an estimate to see what kind of work we would do and to ask a professional all of his questions beforehand. We sent over one of our expert Design Specialists, Rick Weber, to the home where he carried out an inspection of the walkway area. Rick explained to the homeowner that this problem was fixable with the help of two products: PolyLevel and NexusPro. After the homeowner had a good understanding of the process and had no further questions, he agreed to the installations. When our Foreman, Ryan Trogstad, and his crew arrived at the site, the began prepping the area. They started the installations by drilling small holes throughout the walkway area and inserting ports through them to reach the empty space under the concrete surface. Next, they filled the space with the PolyLevel which immediately raised the sinking slabs back up. To finish off the project, the crew used the NexusPro sealant to the joints and cracked areas which provides flexibility and long-lasting durability. They sprinkled a thin layer of native sand on top of the sealant for a smooth and appealing look to the concrete walkway. The crew cleaned, packed up their materials, and left the site, leaving a leveled walkway and a happy homeowner.

If your concrete is sinking, now you know what needs to be done! Schedule your FREE estimate with American Waterworks and get it leveled up again.

A homeowner in Minneapolis, MN was worried when he heard from one of his kids talk about the carpet in their basement bedroom being wet. He decided to take a look at the area himself and sure enough found water damage at the base of the wall. He wanted to stop the issue right away rather than think about what to do for a while, so he started researching solutions. Finding the American Waterworks website in his searching, he was interested when he saw we offered FREE no-obligation estimates. He signed up for an estimate and was later greeted by Design Specialist Nick Skillman. Nick inspected the basement area and found the water concerns that the homeowner had. He informed the homeowner that with our waterproofing system, the water would no longer cause damage to the basement. The homeowner agreed and was eager to move forward with the project. One of our Foremen, Jeromy Anderson, and his crew went to the site to carry out the installations of our WaterGuard system and TripleSafe Sump System. They began the project by jackhammering a channel on the floor at the base of the walls that had water damage. Next, they placed a layer of drainage stone in the empty channels, followed by the WaterGuard system and more clean stone. The WaterGuard system intercepts water at the perimeter and sends it safely away through a feed line to the pump. The old pump was then replaced with the new TripleSafe Sump System which is designed to keep basements dry with triple the protection of a normal pump. To finish, the crew placed a layer of fresh concrete on top of the WaterGuard for both protection and a smooth final look. The homeowner was relieved that he didn't have to worry about future water invading his basement space again. 

If you ever notice water damage to your basement floors, don't hesitate to contact American Waterworks for help, starting with a FREE estimate appointment. 

A homeowner in Minneapolis, MN became worried when she was in her basement space and noticed a large amount of water damage to her floors. Upon further inspection, she found that the bottom of the walls had some damage and were taking in water from the outside. She knew something had to be done sooner than later to stop the problem for good, so she went to the internet to find a solution. The American Waterworks website showed up in her searching and she was impressed with the before and after results of other customer's basements. She signed up for a FREE estimate with one of our experts, and we sent over Design Specialist Dylan Woitas to inspect the area. Dylan assured the homeowner that something could be done to fix the problems she was having, and his recommendation was to install our WaterGuard system and SuperSump Plus pump. The homeowner agreed to the plans and was eager for the project to begin. On the day of the installations, our Forman, Arturo Mares, and his crew arrived at the home prepared to waterproof the basement space. They started the process by jackhammering channels on the floor along the base of the walls and placing drainage stone inside. Then, they placed the WaterGuard system on top and added more clean stone. The SuperSump Plus pump was placed in the necessary location and a feed line was installed to connect the WaterGuard system to the new pump. The crew finished off the project by filling the leftover gaps with fresh concrete and smoothed it out for a clean finish and to keep dirt and debris out. The homeowner was impressed with our crew's work and how efficient and effective the process was for her basement space. 

Don't let water create damage to your basement! Click HERE to schedule your free no-obligation estimate with American Waterworks. 

A homeowner in Crystal, MN became worried about the state of her basement when she discovered a small puddle of water that had formed on the floor. She didn't want more damage done to the space, so she decided to go online and see what services were in her area. She looked up "Minnesota basement waterproofing" and found the American Waterworks website. After looking through what we had to offer she signed up for a FREE no-obligation estimate with us and was later greeted by one of our Design Specialists, Dylan Woitas. Dylan inspected the basement space and developed a detailed solution for how to move forward which included installing a variety of basement waterproofing products. The homeowner was confident in the plan and agreed to move forward with the project. Our Foreman, Jesus Covarrubias, and his crew made their way to the site for the installation process and began by fastening our CleanSpace water vapor barrier to the walls to stop any future leaking water from entering the basement. Next, they jackhammered channels along the perimeter of the basement and filled them with drainage stone. The WaterGuard basement system was then installed on top and followed by more clean stone. Then, the TripleSafe sump pump was installed, and the crew connected a feed line from the new drains to the sump pump for the water to move from. For the last product, they installed an AprilAire dehumidifier to promote the flow of healthy air in the space. Finally, the crew filled in the jackhammered areas with a layer of concrete and smoothed it out for a clean final look. The homeowner was very happy with the results and glad she had contacted us for help.

Looking for a reliable basement waterproofing company? Look no further! Contact us for your FREE estimate appointment to get started.

A homeowner in Maple Grove, MN was downstairs in her basement and became worried when she noticed some water damage to the floors of one of the rooms. She knew water coming into the basement wasn't a good sign, but also wasn't sure what should be done to fix the issue. Online she looked up "basement repair contractors" in hopes of finding a service in the area that could inform her on the subject and fix the problem. Out of all of the Minnesota basement waterproofing companies, the American Waterworks name stood out to her. After she looked through our website more and saw how many positive reviews we had from past customers, she knew we were the right choice and signed up for a FREE estimate. Our Design Specialist, Derek Vickstrom, went to the home to inspect the basement and see what could be done to help the space. He determined that the water damage was likely from water leaking through small cracks in the concrete floors and that our WaterGuard basement drains were the perfect solution to stop it. The homeowner was eager to move forward with the project and she agreed to the plans. On the project day, our Foreman, Diego Barrientos, and his crew went to the site and began by jackhammering channels along the perimeter of the basement. They filled the channels partly with drainage stone and placed the WaterGuard drains and more clean stone on top. Finally, they poured and smoothed some concrete on top for protection and to keep out dirt and debris from entering the drains. The homeowner was thrilled with the results and thanked our crew for their hard work.

Water has no place in your basement space! If you're interested in a FREE no-obligation with American Waterworks, don't hesitate to reach out to us.

A homeowner in Minneapolis, MN, knew their basement was in trouble after they saw several damp spots throughout their basement. Knowing this was not a do-it-yourself fix, the homeowner searched for "basement waterproofing near me". After sifting through several companies, only one company stood above the rest, American Waterworks. The homeowner loved how we were a family-owned business and our ONE team mindset, so they signed up for their FREE estimate. After the estimate was set, we sent Daniel, one of our Design Specialists, to the home. Daniel arrived promptly at the home and started his in-depth walk through the basement. Once he completed his investigation, Daniel determined that the northern corner of the basement was struggling the most. Daniel recommended installing WaterGuard in the struggling corner of the basement. The homeowner agreed with Daniel's recommendation and the plans were sent to the office for approval. Once they were approved, they were sent to our Foreman, Lane, and his crew to begin the project. Lane and his crew arrived at the home to start installing the WaterGuard. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and is covered with cement. Once the WaterGuard was secured, the crew tied it to the current sump system. The crew successfully installed all the products, cleaned up their materials, and left the home. The homeowner was in awe of the excellent work completed by the crew. If you are suffering from a similar issue, sign up for your FREE estimate today! 

A homeowner in Eden Prairie, MN, was inspecting their basement following heavy rainfall and discovered their walls and floors were damp. Concerned by this discovery, the homeowner knew they needed professional assistance. The homeowner looked into several waterproofing companies near Eden Prairie and our company stuck out compared to the rest. After realizing we were the best choice for them, the homeowner decided to call our Appointment Center and sign up for their FREE estimate. We sent one of our Design Specialists, Kevin, to the home to investigate the basement. Following his detailed walk-through, Kevin determined the basement required professional basement waterproofing. Kevin proposed his plan to the homeowner and they agreed. After earning the homeowner's approval, the plans were sent to the office for additional approval. After the office finalized the project, they were passed along to our Foreman, Chris, and his crew. The crew traveled to the home and began the waterproofing project. Once they arrived, the crew started by installing the WaterGuard, a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew tied to the WaterGuard system into the new SuperSump+. Next, the crew installed CleanSpace on the unfinished basement walls. CleanSpace is a washable liner that can conform to bumpy or cracked walls and is installed with permanent drilled-in fasteners. The crew installs CleanSpace by mechanically attaching them to basement walls with plastic drilled-in fasteners. Once the CleanSpace was attached, the crew could clean up their materials and leave the home. The homeowner was in awe of the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today!  

A homeowner in Long Lake, MN, grew alarmed after finding water stains and damp spots throughout their basement. Wanting a lasting solution, the homeowner looked began looking into professional waterproofing businesses near them. At first, the homeowner was overwhelmed by all the options around them, but after taking a closer look they found the best company for them, American Waterworks. The homeowner called our Appointment Center and signed up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of Nick, one of our Design Specialists. Nick arrived at the home and began the detailed inspection of the basement. Following his inspection, Nick determined that the basement needed to be properly waterproofed. Nick came up with a solution that would solve several issues in the basement and the homeowner decided to follow his plan. Once the plan was approved by the homeowner and the office, they were sent to our Foreman, Diego. The crew traveled to the home and began the project. First, the crew installed the WaterGuard on the North and West walls. The WaterGuard is a below-floor drain that rests in a bed or drainage stone on top of the foundation footing. The crew installs WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channel. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew connected the SuperSump+ into the WaterGuard system. Next, the crew installed an IceGuard on the outside discharge line. The IceGuard is an anti-freeze fitting that is installed outside of your home and ejects water away from the foundation. Finally, the crew installed the Aprilaire E70 in the home to control the humidity. The homeowner was relieved to know their basement was no longer at risk of water intrusion. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Champlin, MN, found their sump pump was beginning to malfunction. Worried this could cause long-term damage, the homeowners knew they needed a professional to provide them with a possible solution. After some research, the homeowner came across an impressive sump pump before and after on our social media. The homeowner took a closer look at our services and decided that we were the company for them. Since they were already on the website, the homeowner decided to sign up for their FREE estimate. Once their FREE estimate was set, the homeowner awaited the arrival of Nick, one of our Design Specialists. Nick arrived at the home and began looking inspecting the basement and the area around it. Following his inspection, Nick discovered that the sump pump needed to be replaced. Nick presented his solution to the homeowner and they agreed. Once they earned the stamp of approval, the plans were sent to the office and then to our Foreman, Diego. Diego and his crew traveled to the home to begin the sump pump installation. Before the sump pump could be replaced, the crew started by installing WaterGuard around the old sump pump. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the SuperSump+. The crew installed a feedline across the floor to connect the SuperSump+ to the new WaterGuard. Next, the crew attached CleanSpace to the unfinished basement walls. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. Once the CleanSpace was secured, the crew could clean up their materials and leave the home. The homeowner was relieved to know they had an up-to-date sump pump. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Champlin, MN, knew it was time to have their patio inspected. Unsure of what could have caused this issue, the homeowner wanted to find answers. The homeowner had a friend who had similar issues, so they asked them for any recommendations. Their friend praised working with us, American Waterworks, and talked about our impressive products and crews. Convinced enough to work with us, the homeowner decided to sign up for their FREE estimate on our website. Once the estimate was set, we sent one of our Design Specialists, Gary, to the home to start the detailed estimate. Gary inspected, measured, and was able to diagnose a solution for the sunken patio. Next, Gary was able to present his findings to the homeowner and provide them with a proper solution. The homeowner liked Gary's plan, so they agreed with his recommendations. The plans were sent to the office to be finalized, then to our Foreman, Patrick, and his crew to begin. Patrick and his crew made their way to the home and started the lift. To lift the patio back to its original level, the homeowner used PolyLevel, a polyurethane foam injection solution. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro Sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once all the products were properly installed, the crew could clean up their materials and leave the home. The homeowner was delighted with the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner from Plymouth, MN, received a postcard in the mail from American Waterworks, which highlighted the importance of having your home tested for dangerous radon gas. She was interested to know more about radon so she decided to have her home tested, as she felt it was better to be safe than sorry. When she called in, she scheduled her FREE estimate, and several weeks later, a Design Specialist from our radon and concrete division headed out to the home. 

On the day of the inspection, our Design Specialist, Kyle P, headed out to the home. He got right to work inspecting each entry point he felt radon would enter through, as well as getting a better look at the home as a whole to find the best place to install a mitigation system, should it be needed.

Once Kyle finished his inspection, he met with the homeowner to go over his findings. In anticipation of Kyle's arrival, the homeowner had already had their home tested, and the results returned at 10.9 pCi/L. Kyle began by answering some questions the homeowner had. He explained that radon is a naturally occurring gas that comes from the breakdown of soil around the foundation of a home. As the soil decays and the gas is released, it enters your home through cracks or small porous holes. Radon is colorless, odorless, and tasteless and, therefore, can go unnoticed in a home. The only reliable way to ensure your home is protected is to have it tested and mitigated if a professional advises you to. Kyle then said that the homeowner had radon rates of 10.9 pCi/L which is way higher than he'd like to see. The Minnesota Dept. of Health recommends taking action to combat radon at any levels that return over 4 pCi/L.  Kyle recommended a radon mitigation system to combat the high levels in the home. A typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. When installed by a professional radon mitigation specialist, a radon mitigation system will lower the concentration of radon gas in your interior air to the minimal levels recommended by the EPA and other health safety agencies. The homeowner liked the sound of Kyle's plan, and scheduled the job for several weeks later. 

On the day of the installation, our radon production team, led by their Foreman, Dakota, was able to install the radon mitigation system without any complications. Now, our customer can breathe easier knowing that her interior air is clean! 

Are you aware of the risks radon gas can bring to your home? Click HERE for your FREE estimate for dangerous radon gas!

A homeowner from Rogers, MN, was beginning the process of selling her house. Before she could confidently put her home on the market, she knew there were several things that needed to be fixed to ensure she received the most value for her home. One of the larger projects was figuring out how to address her sunken concrete walkway in front of her home. She began to look for concrete repair in Minnesota and eventually found our website. She was impressed with our before and after concrete repair photos and decided to schedule her FREE inspection. 

A few short weeks later, Dave S, one of our Design Specialists, headed out to the home. After Dave completed his thorough inspection, he was ready to make his recommendation to the homeowner. Dave informed the homeowner that concrete can sink for a variety of reasons and that American Waterworks could address the issue using our PolyLevel injection method. Dave explained that PolyLevel is a dense polyurethane foam that expands when it's injected beneath sinking concrete surfaces. It fills voids left by soil erosion while simultaneously lifting the concrete back to its desired location. Dave went on to say that he wanted to follow up the PolyLevel with two more of our products to seal and protect the lift. First, Dave recommended our NexusPro. This silicone-based sealant is applied to cracks and joints in the newly lifted concrete. It's designed to withstand harsh weather conditions and works to prevent water from getting below the slab. Finally, Dave recommended our SealantPro. Unlike concrete sealers available at big-box stores, SealantPro permanently protects concrete with just one application and extends its life by 3-5 times. SealantPro is a state-of-the-art material that bonds with concrete on a molecular level, permanently protecting it from water, dirt, and other contaminants in a single coat. Once applied, SealantPro dries in minutes and is fully cured in just 6 hours, so you can use your concrete the same day. It is simple, fast, economical, and extremely effective. The homeowner liked the sound of protecting her newly lifted concrete and decided to schedule the job for several weeks later. 

On the day of the project, our Foreman, Sam, and his team arrived bright and early and wasted no time getting to work. They began by applying our SealantPro to the surface. Because this product requires time to cure to be effective, our team had to return a few days later to install the rest. On the day of the lift, Sam began by verifying the measurements Dave had left for them. Next, they strategically drilled dime-sized holes into the sunken concrete. Next, they inserted the PolyLevel through ports and made sure to closely monitor the lifting process to ensure no over-correction was made. Finally, they sealed the cracks and joints in the concrete with NexusPro. Now, our customer can move on to other projects and confidently sell her home!  

A Minneapolis, MN,  homeowner noticed that each time he went down to his basement, he was greeted with a damp, humid feeling. He had no idea who to turn to for Minneapolis basement waterproofing, so he took to the internet. Quickly, he found our website and recalled meeting one of our Design Specialists at the home and garden show in Minneapolis. He signed up for his FREE estimate, and several weeks later, a member of our Design Specialist team, Derek V, was headed out to the home. 

When Derek arrived, he got right to work evaluating the basement. He met with the homeowner to deliver his recommendations when he finished his inspection. Derek explained that he wanted to use two of our products to address the damp basement. First, Derek recommended our WaterGuard. This unique french drain gets installed below the floor slab but atop the foundation's footing. It works to collect water coming up through holes or cracks in the floor, giving it a channel to flow freely to a disposal site. Because the basement lacked a means of disposal, Derek recommended our SuperSump sump pump. This pump is an effective, yet economical solution to basement water intrusion. The SuperSump boasts a powerful Zoeller® ⅓ horsepower cast-iron sump pump, capable of pumping 2,220 gallons of water per hour at an 8-foot head out of your basement. The homeowner agreed with Derek's recommendations and scheduled the job for several months later. 

The day of the project eventually rolled around. Our team, led by their Foreman, Francisco E, successfully installed 36ft of WaterGuard, and 1 SuperSump sump pump. Now our customer can rest easy knowing that his damp basement worries are in the past!

Do you have a humid basement? Click HERE to claim your FREE estimate! 

A homeowner from Mounds, MN, was in the initial stages of putting his home up for sale. Before the house could be listed, he had a list of updates that had to be made to ensure that the home would be sold for its true value. One of the first jobs was correcting the homes driveway that had been cracking and sinking for a few years. The homeowner took to the internet to search for cracked concrete repair in Minnesota and quickly found our website. He perused through our before and after pictures and was impressed with our work. He scheduled his FREE estimate, and several weeks later, our Design Specialist, Nate B, headed out to the home. 

Nate got right to work assessing the concrete. When he was finished, he met with the homeowner and informed him that the concrete could be remedied with the help of our PolyLevel injection. He explained that PolyLevel is a dense polyurethane foam that expands as it's injected beneath sunken concrete slabs. As the foam expands, it slowly fills voids left by soil erosion, lifting the sunken slab back to its desired location in the process. Nate went on to say that he recommended safeguarding the lift with our NexusPro. This silicone-based sealant gets installed to the cracks and joints in the concrete and serves as a barrier as it's specially formulated to stand up against harsh weather conditions. The homeowner liked the sound of Nate's plan and decided to schedule the project for several weeks later. 

On the day of the project, our Foreman, Dylon V, got started by verifying the measurements in the areas planned to be lifted. Next, his Co-Foreman drilled holes into the sunken concrete. Then, they inserted the PolyLevel through the holes, closely monitoring the lift to ensure the slab returned to the proper position. When they finished the lift, they began sealing off the joints. When the job had been completed, our customer was thrilled to know that his driveway was restored and his home was one step closer to being sold! 

A homeowner from Maple Grove, MN, was facing a serious issue with their basement. Each time it rained in their area, the homeowners were left with water pooling on their basement floor. He was tired of cleaning up after each storm and was constantly worried about what the water intrusion could do to his home. He began to look for a company offering basement waterproofing in MN. When he found our website, he was quickly impressed by the previous work we had done in his area. He decided to claim his FREE estimate, and several weeks later, Adam V, one of our Design Specialists, was headed out to the home. 

When Adam arrived at the home, he got right to work assessing the basement of the home. When he finished, he informed the homeowner that we could address the issue with the help of two of our products. First, Adam recommended our CleanSpace wall system. CleanSpace is a 100% waterproof tarp-like material that gets installed directly on the unfinished walls of a basement. It works to direct water entering through the wall downward and into a perimeter drain. Adam noticed that the basement lacked a source of drainage and recommended our WaterGuard drain. This unique French drain gets installed below the basement floor, but atop the footing of the foundation to keep the drain out of the 'mud zone'; an area where similar drains tend to clog. Adam explained that the WaterGuard has two functions. First, it collects water entering down from the CleanSpace and water coming up from the floor. Second, it gives this excess water a channel to flow freely to the sump pump in the basement. The homeowner liked the idea of our products complimenting one another and signed on the spot. 

Sometime later, the project was underway. On the day of the project our team, led by their Foreman, Diego B, was able to successfully install 12ft of our CleanSpace and another 6 ft of WaterGuard. Now, our customer can rest easy knowing that rain water will have no impact on her basement! 

A homeowner from Minneapolis, MN was growing tired of her leaky basement. Each time it rained, the homeowner was left with a flooded basement. She no longer wanted to deal with the problem and needed a company offering repair for leaky basements. While scouring the internet for 'how much to fix a leaky basement', the homeowner came across our website. She was impressed with the various leaky basement repair projects on our website and decided to sign up for her FREE estimate. Several weeks later, Eric H, one of our Design Specialists, was scheduled to stop out at the home. 

When Eric arrived, he was directed to the basement, and he began his inspection. When he concluded, he met with the homeowner to deliver his recommendations. First, Eric recommended our CleanSpace vapor barrier. This 100% waterproof tarp-like material gets installed directly onto the unfinished walls of the crawl space and works to direct water entering through holes and cracks in the wall downward and into Eric's second recommendation, our WaterGuard. WaterGuard is a unique French drain that gets installed below the floor of the basement but atop the footing of the foundation. This unique placement keeps the drain out of the 'mud zone' where similar drains tend to clog. It acts as a channel for water entering the floor joists, as well as any water draining down the wall, directing the water to the appropriate disposal site. While Eric had been in the basement, he had noted that the basement lacked a sump pump or discharge line, so he recommended our SuperSump Plus. Our SuperSump is an effective yet economical solution to rid the basement of unwanted water. The homeowner was thrilled to know that Eric had created a comprehensive plan for her basement and decided to schedule the job for several weeks later. 

On the day of the project, our Foreman, Kiko, and his team approached the project with a 'divide and conquer' method. Part of Kiko's team began by applying the CleanSpace to the walls of the basement, while the other team began jackhammering away at the perimeter of the basement for the placement of the WaterGuard. Next, the WaterGuard and Sump basket were placed. The final steps of the project included connecting all of the systems to function together and covering the WaterGuard with a layer of fresh cement to hold it in place. When the job was completed, Kiko and his team had installed 80ft of WaterGuard, 58 ft of CleanSpace, and 1 SuperSump sump pump. Now, our customer can breathe easy knowing that her water intrusion issue has been handled! 

A homeowner from Edina, MN, had recently learned about the dangers of radon gas and the risks it can pose to a household. Not wanting her family to be breathing in unhealthy air, she decided to head to her local home improvement store to buy a kit for testing your home for radon. After running the home test, the homeowner discovered higher-than-normal levels of radon in her home. She knew she needed more information on radon gas and how to protect her home, so she began to look for a radon mitigation company near Edina, MN. When she came across our website, she decided to schedule her FREE estimate, and several weeks later, our Design Specialist, Brad W, headed out to her home. 

When Brad arrived, he got right to work scouting out the best place for a radon mitigation system. When he finished, he met with the homeowner to discuss next steps. First, Brad began by saying that the homeowner had done the right thing. Brad elaborated, saying that radon is tricky because it's odorless, colorless, and tasteless, making it completely undetectable without the proper testing. He went on to say that because of the elevated levels, he was recommending the installation of a radon mitigation system. A typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. When installed by an experienced radon mitigation specialist, a radon abatement system will lower the concentration of radon gas in your interior air to the minimal levels recommended by the EPA and other health and safety agencies. The homeowner was thrilled that Brad had a solution to her problem, and signed on the spot. 

Several weeks later, our crews were headed back to the home to perform the installation. Our Foreman, Dakota, was able to assist his team in a flawlessly executed installation of a mitigation system. Now, our customer can breathe easy knowing her home is circulating clean air! 

A homeowner from Bloomington, MN, was facing a unique issue with her basement. Each time it rained, the homeowner noticed a steady stream of water entering her space, trickling down her foundation walls. She was worried about what this could mean for the rest of her home, so she decided to find a basement waterproofing specialist near Bloomington, MN. When she saw our website, she signed up for her FREE estimate. Several weeks later, Nick S, one of our Design Specialists, was headed to the home.

When Nick arrived, he wasted no time heading down to the basement to see what could be done. When he was finished with his inspection, he met with the homeowner to deliver his recommendations. Nick began by saying that the homeowner had made the correct choice by contacting us. He explained that waterproofing issues don't get better with time they tend to worsen, getting more expensive as the years progress. Nick then said that he had several products in mind that would address the situation. First, Nick wanted to use our CleanSpace vapor barrier. This 100% waterproof tarp-like material gets installed directly on unfinished basement walls. It works to trap water entering through holes and cracks in the foundation walls, directing it downward and into a perimeter drain, which Nick wanted to be our WaterGuard system. This unique French drain gets installed around the perimeter of the basement beneath the floor, atop the footing of the foundation, keeping the drain out of the 'mud zone' where similar drains tend to clog. This drain works to give water entering the CleanSpace, as well as from holes in the ground, a channel to flow freely to a disposal site. While Nick was inspecting the home, he noticed the home lacked a means of disposing of unwanted water, so he recommended our SuperSump sump pump, an economical yet effective method for ridding your basement of unwanted water. The homeowner was thrilled with Nick's comprehensive solution, so he signed on the spot. 

Weeks later, the job was scheduled to be started. Our Foreman, Arturo M, and his team wasted no time getting started. To start, half of Arturo's team began jackhammering away at the perimeter of the basement for the WaterGuard placement. Simultaneously, the other half of the team began to install the CleanSpace on the basement walls. Next, the WaterGuard is placed, and the CleanSpace is fed into it. Then, the sump basket is placed, and both the sump and the WaterGuard is covered in a layer of concrete to hold it in place. When the crew finished, they had successfully installed 14ft of WaterGuard, 1 SuperSump, and 14 ft of CleanSpace. Now our customer is thrilled to know her basement worries are in the past! 

A homeowner in Mason City, IA, noticed their mold growing on their basement walls. Unsure of the cause, the homeowner knew they needed to find a proper solution. The homeowner asked their friends and family for any recommendations. Several family members recommended working with us, American Waterworks, so the homeowner decided to go ahead and sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Brian. Following his arrival, Brian began his thorough investigation of the basement. Brian discovered several areas where water was seeping into the home. Additionally, Brian discovered the foundation was suffering from settlement and needed to be permanently stabilized. Brian presented his proposal to the homeowner and they decided to go ahead with Brian's recommendations. Once they received the stamp of approval, the plans were passed along to our Logisitcs team to build the plans. The Logisitcs team prepared the project, and they passed the plans along to our Foreman, Jeromy, and his crew to begin. Jeromy and his crew traveled to Mason City and started the waterproofing project.  Once they arrived Jeromy and his crew began by installing WaterGuard around the basement perimeter. The WaterGuard is a below-floor drain that rests in a bed of drainage stone on top of the foundation footing. The crew installs the WaterGuard by digging channels around the perimeter of the basement floor. Once the channels are dug, the crew can go ahead and place the drainage stone in the channels. The WaterGuard is then placed on top of the stone and covered with cement. Once the WaterGuard is in place, the crew could shift their focus to removing the old sump pump and replacing it with the TripleSafe. The crew installed a feedline across the floor to connect the TripleSafe to the new WaterGuard. Next, the crew shifted their focus to installing 21 GeoLock Wall Anchors on the foundation walls. The crew installs the GeoLocks by digging a section of the ground to place the first GeoLock anchor. Once the GeoLock is in place, another anchor is attached to the interior wall. Both GeoLocks are connected by a small, steel pole direct through the ground. Once the GeoLocks are secured, the soil is put back on top of the ground. Along with the GeoLock installation, the homeowner asked that the tightening kit be included as well. This will allow the homeowner to straighten their walls over time. Finally, the crew completed the project by attaching CleanSpace to the unfinished basement walls. CleanSpace is a 100% waterproof plastic vapor barrier that prevents humidity and mold growth. The crew installs CleanSpace by mechanically attaching them to the basement walls with plastic drilled-in fasteners. After all the products were secured, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner from Maple Grove, MN, was beginning the initial phases of getting his home ready to place on the market. Before he could confidently list, he knew of several things within the home that needed to be fixed. One major project was his garage floor, which had been slowly sinking and cracking over the years, causing the lip of the garage to be higher than the driveway, creating a speed bump. He decided he needed to find a concrete contractor in Minnesota, and quickly found our website. He perused through our before and after concrete repair photos and decided to sign up for his FREE estimate. 

Several weeks later, our Design Specialist, Dave S, was headed out to the home. After completing his inspection, he met with the homeowner and informed him that the concrete was probably sinking due to a void being created underneath the concrete from soil oversaturated, excessive drought, or poor compaction when the home was built. The void was causing the concrete to become weak in spots, leading to the cracking. Dave recommended our PolyLevel injection to raise the concrete back to its original state. He explained that PolyLevel is a dense polyurethane foam that expands when it's injected beneath concrete slabs, and as it expands, it fills the voids left by soil erosion, lifting the concrete back into place in the process. The homeowner was thrilled with Dave's recommendation and set up a day for the project. 

About a month later, our Foreman, Patrick B, and his team were headed out to the home. They successfully lifted the slab back into place, erasing the speed bump. Now, our customer is one step closer to confidently selling his home! 

A homeowner in Plymouth, MN, had noticed that their sump pump was working properly and was concerned for the possible damage it would cause to his home if it was not fixed. He quickly searched for basement waterproofing services in the area and came upon our website. He was impressed with our reviews and decided to contact us to claim his FREE estimate. 

Our Design Specialist, Nick S., arrived at the home on the scheduled date and examined the sump pump. He confirmed with the homeowner that their current sump pump is out of date and recommended our SuperSump+ as well as the IceGuard. He explained to the homeowner that the sump pump is installed by first excavating a sump pump pit for the liner and pump to be placed in. Then, the perimeter drain system would be connected to the sump pump system, and clean gravel would be backfilled around the sump pump liner. Lastly, the flooring is restored. He also explained that the IceGuard is installed outside of the home and is designed to eject water away from the foundation.  Unlike traditional discharge lines, our IceGuard is designed not to freeze under cold temperatures. The homeowner thanked Nick for his explanation and happily agreed to his suggestion. 

In a couple of weeks, our Service Technician, Edgar M., and his crew arrived at the home for the installation. Once they were completed, the crew cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing their basement issues were fixed. Are you experiencing similar issues? Click HERE to claim your FREE estimate!

A homeowner in Plymouth, MN, recently came upon our blog post discussing the danger that radon poses in a household. He was concerned that his family was unknowingly breathing in the toxic fumes. He learned that radon is a by-product of uranium, which can be found in soil. As it decays, it releases radon, which creates a high toxicity level in the air. We cannot see, touch, smell, taste, or hear radon, which makes it nearly impossible to detect unless using a radon test kit. After learning this information, the homeowner decided to go to the nearest convenience store and purchase a radon testing kit. After a couple of days, the test results were above 4 pCi/L, and the homeowner quickly began looking for radon mitigation services in the area. He came upon our website and was impressed with our stellar reviews and decided to contact us to claim his FREE estimate. 

In several weeks, our Design Specialist, Kyle P., arrived at the home to assess the basement. He explained to the homeowner that our radon mitigation system consists of a large-diameter pipe that connects the air beneath the foundation to the outdoors. It is installed at the lowest level of the home by drilling a hole in the flooring. A PVC pipe is then placed and connects to the mitigation system, which will be placed on top of the garage. He explained that the reason that the mitigation system is installed at the lowest level of the home is so that it can tackle the radon-rich air before it enters the home. The homeowner was thankful for Kyle's explanation and happily agreed to his design.

In a couple of months, our Foreman, Dakota M., and his crew arrived at the home for the installation. Once they had installed our radon mitigation system, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind knowing that him and his family are breathing in clean air! When was the last time you tested the radon levels of your home? Click HERE to claim your FREE estimate!

A homeowner in Maple Grove, MN had noticed multiple signs of basement damage, such as damp walls and wet floors. Concerned that the issue would get worse over time, he decided it was better to get it fixed right away than wait. He searched for "Wet Basement repair near me" and came upon our website. After browsing our website, the homeowner was impressed with our 5-star reviews and decided to claim his FREE schedule. 

In a couple of weeks, our Design Specialist, Adam V., arrived at the home to conduct a thorough inspection of the basement. He explained to the homeowner that one of the common causes of a wet basement is a failed footing drain. When this fails, it causes the soil surrounding the foundation to become saturated with water. Water then enters through cracks and joints and leads to the basement. For this reason, Adam recommended having our WaterGuard, below-the-floor perimeter drain system, and CleanSpace plastic wall vapor barrier, installed. The homeowner was grateful for Adam's explanation and decided to move forward with the project. Adam's designs were then sent to our Foreman, Diego B.

In a couple of months, Diego and his crew arrived at the home for the installation. The crew placed 12ft of CleanSpace on the walls with our drilled-in fasteners to ensure it stays in place. CleanSpace is designed to catch water from the walls and lead it to the WaterGuard. Our WaterGuard is installed by jackhammering the edges of the floors and placing clean gravel inside. The WaterGuard then rests on top and is backfilled with more clean gravel to ensure it stays in place. The crew installed 12ft of WaterGuard. Once the crew was done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing his basement issues have been fixed! Click HERE to schedule your FREE estimate!

A homeowner in Rogers, MN was concerned her garage floor had been uneven and formed large cracks. She decided to search for "concrete lifting near me" and came upon our website. After browsing our website, she was impressed with our job stories and decided to schedule her FREE estimate. 

In a couple of weeks, our Design Specialist, Dave S., arrived at the home to assess the garage. He explained to the homeowner that it is common to see a settling garage floor due to soil compaction and settling. When a soil's load-bearing capacity exceeds it causes the soil to expand and contract beneath the concrete slab. As this continues, the slab will sink and eventually cause cracking in one or more parts of the slab. For this reason, Dave recommended our PolyLevel to lift the concrete and NexusPro to seal the joints and cracks. The homeowner decided to move forward with Dave's recommendations and his designs were then sent to our Foreman.

In about a month, our Foreman, Sam K., and his crew arrived at the home for the installations. They began by drilling small holes into the slab. The injection ports are then installed and PolyLevel is injected beneath the slab. Once the concrete slab has been lifted, the crew ensures that it is level before sealing the holes with concrete. Lastly, the crew uses NexusPro to seal the giant cracks and joints. Once the crew was done with the installation, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with her smooth and crack-free garage floors! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Crystal, MN, had noticed that the gaps between the concrete slabs of her driveway were farther apart than she would prefer. We had previously helped her waterproof her basement, and she remembered that we also do concrete services. She decided to schedule her FREE estimate with one of our Design Specialists.

In a couple of weeks, our Design Specialist, Daniel R., arrived at the home to asses the driveway. He told the homeowner that we could seal the joints with NexusPro, our silicone-based sealant that is long-lasting. Unlike traditional sealants, NexusPro resists UV rays, meaning it will not crack, bubble, or dry out. The homeowner agreed and decided to move forward with the project. 

In a couple of months, our Foreman, Ryan T., and his crew arrived at the home for the installation. Once they were done sealing the joints, they cleaned up their equipment and left the home.

Now, our customer has a smooth driveway free from any concrete gaps! Are you experiencing something similar? Click HERE to schedule your FREE estimate!

A homeowner in Mound, MN, was concerned for his sunken concrete as it was difficult to drive over, so he decided to look into concrete-lifting services in the area. He found our website and was impressed with our before and after stories and decided to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Nate B., arrived at the home to assess the driveway. He explained to the homeowner that one of the common causes of a sunken and uneven driveway is soil compaction and settling. When a soil's load-bearing capacity exceeds, it causes the soil to expand and contract beneath the concrete slab. Over time, the slab will sink and, in most cases, form cracks in one or more parts of the slab. To fix this issue, Nate recommended our PolyLevel to lift the concrete. The homeowner decided to move forward with the project, and Nate's design was sent to our Foreman. 

In about two weeks, our Foreman, Dylon V., and his crew arrived at the home for the installation. They began by drilling small holes into the slab. The injection ports are then installed, and PolyLevel is injected beneath the concrete, filling in the empty spaces. After the concrete slab has been lifted, the crew ensures it is level before sealing the holes with concrete. Once the crew was done with the installation, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind that his concrete issues have been fixed. Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Minneapolis, MN, was concerned that his damp basement would cause long-term damage. He decided to look into basement waterproofing services in the area. He found our website and was impressed with our before-and-after photos. He then decided to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Derek V., arrived at the home to assess the basement. He explained to the homeowner that one of the common causes of a leaking basement is hydrostatic pressure. Hydrostatic pressure is the pressure exerted by a liquid. When water saturates the soil around the home's foundation, the water puts tremendous pressure against the walls. Water then seeps through the cracks and joints and eventually leads to the basement. To address this issue, Derek recommended installing our SuperSump+ with the UltraSump, WaterGuard, IceGuard, and CleanSpace. Our SuperSump+ is capable of pumping out an average of 2,200 gallons of water per hour, and the UltraSump is our backup sump pump system that can operate during power outages. WaterGuard is our perimeter drain system that is designed not to clog, unlike traditional drain systems. Our IceGuard is our anti-freeze discharge line, which would be attached outside of the home. Lastly, CleanSpace is our vapor wall barrier designed to protect the home by collecting water that seeps through the walls and directs it to the WaterGuard. The homeowner decided to move forward with the project, and Derek's design was sent to our Foreman, Kiko P. 

In about two months, Kiko and his crew arrived at the home for the installation. They began by installing 24ft. CleanSpace and attach it to the walls. Then, a sump pump pit is excavated where the sump pump liner will be placed. The crew then installs 14ft of WaterGuard, which is connected to the sump pump. Once WaterGuard is installed, the crew installs 2 IceGuards outside of the home. Lastly, the crew finishes installing the sump pump, and the flooring is restored with concrete. After everything was completed, the crew cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with his waterproofed basement! Are you experiencing something similar? Click HERE and schedule your FREE no-obligation estimate!

A homeowner in Minneapolis, MN, was concerned that his sunken driveway would pose as a trip hazard for friends and family. He decided to search for "concrete lifting in Minneapolis" and found our website. After browsing our website, he was impressed with our before and after transformations, so he contacted us to schedule his FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home on the scheduled date to inspect the driveway. He explained to the homeowner that one of the common causes of sinking concrete is soil compaction and settling. To tackle this issue, our Design Specialists recommended lifting the concrete slabs with PolyLevel. Our PolyLevel is made of a high-density polyurethane formula that stabilizes and lifts concrete slabs. It is the most effective and longest-lasting solution for concrete issues. The homeowner happily agreed to his suggestion, and his design was sent to our Foreman, Dylon V.

In a couple of weeks, Dylon and his crew arrived at the home for the installation. They began by drilling small holes into the concrete slab and installing the injection ports. PolyLevel is then injected beneath the slab and fills in the empty spaces in the soil. Once the slab has been lifted, the crew ensures it is leveled before sealing the small holes with concrete. After they were done, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind with his smooth and level driveway! Is your driveway uneven? Click HERE and schedule your FREE no-obligation estimate!

A homeowner in Brooklyn Park, MN, noticed that his driveway was uneven and was concerned it would be a trip hazard for him and his family. He remembered one of his family members recommending our company, and so he decided to go through our website. After browsing our website, he was impressed with our 5-star reviews and decided to schedule his FREE estimate.   

In a couple of weeks, our Design Specialist, Canon T., arrived at the home to inspect the driveway. He informed the homeowner that one of the common causes for sinking concrete is soil compaction and settling. When the soil's load-bearing capacity is exceeded, it causes the soil to expand and contract beneath the concrete slab. This eventually causes the concrete to sink. For this reason, Canon recommended our PolyLevel to lift the concrete and NexusPro to seal the cracks and joints. The homeowner was grateful for his explanation and decided to move forward with his design.

In about a month, our Foreman, Dylon M., and his crew arrived at the home for the installation. They began by drilling small holes into the concrete slab and installing the injection ports. PolyLevel is then injected beneath the concrete slab, filling in any spaces. Once the slab has been lifted, the crew ensures it is level before sealing the holes with concrete. Lastly, the crew uses NexusPro to repair the cracks and seal the joints. After everything had been properly installed, the crew cleaned up their equipment and left the home. 

Now, our customer's driveway is smooth and level! Do you have an uneven driveway? Click HERE and schedule your FREE estimate with one of our experts!

A homeowner in Minneapolis, MN, had been wanting to slowly upgrade parts of her home and decided to focus on her front walkway and stairs. She looked into concrete lifting in the area and found our website. After browsing our website, she was impressed with our 5-star reviews and decided to schedule her FREE estimate. 

In a couple of weeks, our Design Specialist, Dustin A., arrived at the home to assess the issues. He had noticed that the gap between the stairs and sidewalk and between the concrete slabs of the walkway were growing apart. Dustin provided multiple solutions and showed the homeowner the routes that she could take to fix this issue. The homeowner decided to install our NexusPro to seal the joints of the problem areas. Dustin's design was then sent to our Foreman, Ryan T.

In about a month, our Foreman, Ryan T., and his crew arrived at the home for the installation. Our NexusPro is a silicone-based sealant that is specifically engineered to provide flexibility and long-lasting durability. Unlike traditional sealants, NexusPro can withstand hard conditions and can resist UV rays, meaning it won't ever crack, bubble, or dry out. Once the crew was done, they cleaned up their equipment and left the home.

Now our customer can have peace of mind that she is one step closer to achieving her dream home! Are you experiencing something similar? Click HERE and schedule your FREE estimate today!

A homeowner in Dayton, MN, noticed the cracks along his basement walls were growing and was concerned that they would worsen and lead to permanent damage to his home. He decided to search for "cracked foundation repair near me" and found our website. After browsing our website, he was impressed with our 5-star reviews and was confident that we would do the job correctly, so he contacted us to schedule his FREE estimate. 

In several weeks, one of our Design Specialists arrived at the home to assess the basement. He explained to the homeowner that one of the common causes of cracked foundation walls is hydrostatic pressure. Hydrostatic pressure is pressure exerted by a liquid. When it rains or floods, water saturates the soil surrounding your foundation. That water then applies pressure against the walls, impacting the stability of the home. To address this issue, our Design Specialist recommended our GeoLock wall anchors. Our GeoLock wall anchor system is designed to stabilize foundation walls permanently and, in many cases, straighten the walls over time. The homeowner happily agreed and decided to move forward with the project. 

In about a month, our Foreman, Victor S., and his crew arrived at the home for the installation. The crew installed 5 GeoLock anchors by digging holes several feet away from the foundation and placing the earth anchor. Then, the anchor is connected to the interior wall, and both anchors are attached by a small steel pole that would run through the ground. After the crew was done with the installation, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with his stabilized walls! Have you noticed cracks along your foundation? Click HERE and schedule your FREE estimate!

A homeowner in Loretto, MN, recently came upon a social media post discussing the danger that radon poses in homes. She learned that radon is a by-product of uranium, a naturally occurring radioactive element that can be found in soil. Radon is the second-leading cause of lung cancer and can be extremely dangerous when inhaled. Worried that her family was unknowingly breathing in the toxic fumes, she decided to visit her local convenience store to purchase a radon testing kit. After several days, the test came back about 4pC/L, which is the EPA's required action for radon, and the homeowner began searching for radon mitigation services in the area. She found our website and was impressed with our 5-star reviews, so she decided to schedule her FREE estimate. 

In a couple of weeks, our Design Specialist, Gary S., arrived at the home. He explained to the homeowner that our radon mitigation system would be installed at the lowest level of the home. This way, it tackles the radon rich air before it can enter the home. The homeowner happily agreed and decided to move forward with the project, and Gary's design was sent to our Foreman, Dakota M.

In a couple of weeks, Dakota and his crew arrived at the home for the installation. They began by placing the PVC pipe beneath the footing and connecting it to the system which would be installed outside of the home. Once they were done, the crew ensured it was working properly before cleaning their equipment and leaving the home. 

Now, our customer can feel at ease knowing her family is breathing in clean air! When was the last time you tested the radon levels of your home? Click HERE and schedule your FREE estimate!

A homeowner in Loretto, MN, noticed multiple basement issues, such as standing water and damp walls. The homeowner was concerned that it would lead to mold and permanent damage to his home, so he decided to look into basement waterproofing in the area and found our website. After browsing our website, he was impressed with our 5-star reviews, so he decided to contact us to schedule his FREE estimate. 

In several weeks, one of our Design Specialists arrived at the home to assess the basement. He checked the homeowner's sump pump and explained to the homeowner that the pump was not working properly. To fix the issue, he recommended our TripleSafe sump pump system and IceGuard. Our TripleSafe comes with three levels of protection. The first pump is the primary pump and can eject 2,200 gallons of water per hour; the second is placed slightly higher and is in case the primary pump fails or becomes overwhelmed with heavy water. The last pump is a battery backup in case of power outages. Our IceGuard is our anti-freeze discharge line. The homeowner was grateful for our Design Specialist's explanation and happily moved forward with the project.

In a couple of months, one of our Foreman and his crew arrived at the home to replace the sump pump and installed 2 IceGuards. Once they were done, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind that his basement will remain dry all year long! Are you experiencing something similar? Click HERE and schedule your FREE estimate with one of our experts!

A homeowner in Saint Louis Park, MN, was worried when he noticed mold growing in his basement. He decided to research basement waterproofing in the area. He found one of our yard signs in the neighborhood and decided to contact us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialists, Jesse W., arrived at the home to inspect the basement. He explained to the homeowner that one of the common causes of basement damage is a failed footing drain. When this fails, it causes the soil around the foundation to become saturated with water. Water then enters through the cracks in the walls, between the footing and the wall, and under the footing. To resolve this issue, Jesse recommended our WaterGuard, IceGuard, CleanSpace, and SuperSump+. Our WaterGuard is an under-the-floor perimeter drain system that is designed not to clog. IceGuard is our anti-freeze discharge line, which would be attached outside of the home to send water away from the foundation. CleanSpace is our vapor wall barrier that stops water from permeating the walls and moves the water from any leaks to the perimeter drain system. Lastly, our SuperSump+ is capable of removing 2,200 gallons of water per hour keeping the basement dry all year long. After Jesse explained our products and how they could help, the homeowner agreed to move forward with the project.

In a couple of months, our Foreman, Raul B., and his crew arrived at the home for the installation. The crew began by installing 100ft of CleanSpace on the walls. Then, our SuperSump+ is installed by excavating the sump pump pit and placing the pump liner. Then, 100ft of WaterGuard is installed around the perimeter of the home and is connected to the sump pump. Lastly, the crew finishes installing the sump pump as well as installing 1 IceGuard. Once everything is properly installed, the crew restores the floors by pouring concrete. Then, our crew cleans up their equipment and leaves the home. 

Now, our customer can have peace of mind that his basement will remain dry all year long! Have you noticed mold or mildew in your basement? Schedule your FREE estimate today with one of our experts by clicking HERE!

A homeowner in Hamel, MN, was concerned that his sunken driveway would pose a trip hazard to his family, so he decided to look into concrete lifting in the area. He found our website and was impressed with our before and after transformations and decided to schedule his FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home to assess the driveway and walkway. He informed the homeowner that one of the common causes of sunken concrete is soil compaction and settling. When a soil's load-bearing capacity is exceeded, it causes the soil to expand and contract beneath the concrete slab. Over time the slab will sink and heave causing cracking in one or more parts of the slab. It was for this reason, that our Design Specialist recommended our PolyLevel, a high-density polyurethane formula that stabilizes and lifts sinking concrete slabs. The homeowner was grateful for our Design Specialist's explanation and decided to move forward with his suggestion. 

In about a month, our crew arrived at the home for the installation. They began by drilling small holes into the concrete slabs and installing the injection ports. PolyLevel is then injected beneath the concrete slab and fills in the empty spaces in the soil. Once the slab has been lifted, the crew ensures it is leveled before sealing the holes with concrete. After the crew was done with the installation, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with his driveway smooth and even. Have you noticed sunken concrete? Schedule your FREE estimate today by clicking HERE!

A homeowner in Excelsior, MN, was concerned that his uneven driveway would lower the resale value of his home, pose a trip hazard, and make his home appear visually unappealing so he decided to look into concrete lifting in the area and found our website. After browsing our website, he was impressed with our before and after transformations and 5-star reviews and decided to schedule his FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home to assess the driveway. He explained to the homeowner that one of the common causes of sinking concrete is soil compaction and settling. When a soil's load-bearing capacity exceeds, the soil expands and contracts beneath the concrete slab, causing it to sink and heave. To fix this issue, our Design Specialists recommended our PolyLevel, a high-density polyurethane formula that is designed to stabilize and lift concrete slabs. This method is non-invasive and the most effective and long-lasting solution. The homeowner happily agreed and decided to move forward with the project. 

In about a month, our crew arrived at the home for the installation. They began by drilling small holes into the concrete slabs and placing the injection ports. PolyLevel is then injected beneath the concrete slab filling in the empty spaces between the soil. Once the slab has been lifted, the crew ensures the slab is leveled before sealing the holes with concrete. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer has a leveled driveway! Have you noticed sinking concrete on your property? Click HERE and schedule your FREE estimate today!

A homeowner in Long Lake, MN, was facing multiple issues in her basement, such as unstable walls and standing water. She decided to get the issues addressed rather than waiting longer and began searching for services in the area. She found our website and was impressed with our before and after transformations and decided to schedule her FREE estimate. 

One of our Design Specialists arrived on the scheduled date to assess the basement. When he arrived at the home, he noticed multiple issues with the basement. First, he noticed the stair-step cracks that had formed along the walls. He then noticed that the homeowner's current sump pump was out of date and was unable to properly remove water away from the home. Lastly, he noticed mold growing in a few spots as the moisture levels in the basement were extremely high. To fix this issue, our Design Specialist recommended installing our CleanSpace wall system, WaterGuard drain system, IceGuard discharge line, SuperSump+ sump pump system, GeoLock wall anchors, and Aprilaire Dehumidifier. The homeowner agreed and decided to move forward with the project. 

In a couple of months, our crew arrived at the home for the installation. They began by attaching 120ft of CleanSpace on the walls using drilled-in fasteners to ensure it stays in place. Then, they installed 1 IceGuard and 136ft of WaterGuard around the perimeter of the home and replaced the current sump pump with our SuperSump+. Once those were installed, the crew installed 10 GeoLock wall anchors by digging a hole several feet away from the foundation. The earth anchor is then placed inside and attached to the interior wall. Both anchors are connected by a small steel pole that runs through the ground. Lastly, the crew installs our dehumidifier inside of the home. Before the crew cleans up their equipment and leave, they restore the flooring by pouring concrete. 

Now, our customer can have peace of mind with her foundation walls stabilized and basement damp-free! Are you experiencing something similar? Don't wait and schedule your FREE estimate today by clicking HERE!

A homeowner in Maple Plain, MN, recently came upon our blog post discussing the danger radon poses in homes and was concerned that his family was unknowingly breathing in the toxic fumes. He decided to go to his local convenience store to purchase a radon testing kit, and after several days, the test results were above 4pCi/L. The homeowner then decided to contact us to schedule his FREE estimate. 

One of our Design Specialists arrived at the home on the scheduled date to inspect the home. He created a design where the radon mitigation system would be installed and explained to the homeowner that it would need to be installed at the lowest level of the home. A PVC pipe would be installed at the footing and connected to the mitigation system that would be outside of the home. That way, the system can suction out the radon-rich air beneath the footing and send it outdoors before it can penetrate the home. The homeowner was grateful for our Design Specialist's explanation and decided to move forward with the project.

In a couple of weeks, our crew arrived at the home for the installation. Once they were done installing the system, they made sure that it was working properly before cleaning up their equipment and leaving the home. 

Now our customer and his family can breathe in fresh clean air! When was the last time you tested the radon levels of your home? Click HERE and schedule your FREE estimate today!

A store owner in Spring Park, MN noticed that the side steps of her store were sinking and slightly parting away from the wall it was attached to. Worried that the issue would worsen and lead to permanent damage to the property, she decided to look into concrete lifting in the area. She found our website and was impressed with our before and after transformations and decided to schedule her FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home to assess the walkway and stairs. He explained to the owner that one of the common causes of sinking concrete is soil washout. When it rains or floods, water moves through the ground beneath the concrete slab and washes away the supporting soils. Over time, the space beneath the slab causes concrete to sink or cave in. To fix this issue, our Design Specialist recommended our PolyLevel, which is a high-density polyurethane formula that stabilizes and lifts sinking concrete slabs. Unlike traditional methods for fixing sinking concrete, our method is non-invasive and is the most effective and long-lasting solution. The owner happily agreed and decided to move forward with the project. 

After about a month, our crew arrived at the home for the installation. They began by drilling small holes into the stairs and placing the installation ports. Then, PolyLevel is injected and fills in the space between the soil. Once the stair has been lifted, the crew ensures it is level before sealing the holes with concrete. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind with her stairs properly fixed and leveled! Are you experiencing something similar? Click HERE and schedule your FREE estimate today!

A homeowner in Saint Bonifacious, MN, was concerned that his uneven driveway would be a trip hazard and lower the resale value of his home, so he decided to look into concrete lifting and leveling in the area and found our website. After browsing through our website, he was impressed with our concrete before and after transformations and decided to schedule his FREE estimate.  

In a couple of weeks, our Design Specialist, Ryan P., arrived at the home to inspect the driveway. He explained to the homeowner that one of the common causes of sinking concrete is soil washout. When it rains or floods, water moves through the ground underneath the concrete slabs and washes away the support soils. Over time this leads to gaps and voids in the soil and causes the slabs to sink. To fix this issue, Ryan recommended our PolyLevel to lift the concrete and NexusPro to repair the cracks. The homeowner was thankful for Ryan's explanation and decided to move forward with his suggestions. 

In a couple of months, our Foreman, Sam K., and his crew arrived at the home for the installation. They began lifting the concrete by drilling small holes into the concrete slab and placing the injection ports. PolyLevel is then injected beneath the slab, filling in the space between the soil. After it has been lifted, the crew ensures it is level before sealing the small holes with concrete. Lastly, the crew uses NexusPro to repair the cracks. After the crew was done with the installation, they cleaned up their equipment and left the home. 

Now, our customer has a leveled driveway! Are you experiencing something similar? Click HERE and schedule your FREE estimate by clicking HERE!

A homeowner in Champlin, MN was concerned that his basement was facing water issues as he noticed standing water and leaking walls. He decided to look into basement waterproofing in the area and found our website. After browsing our website, he was impressed with our 5-star reviews and immediately contacted us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Ryan P., arrived at the home to inspect the basement. He explained to the homeowner that one of the common causes of a leaky basement is a failed footing drain. When this fails, water saturates the soil surrounding the foundation. Water then enters through cracks on the walls, between the footing and wall, and underneath the footing. To fix this issue, Ryan recommended our WaterGuard perimeter drain system, CleanSpace vapor wall barrier, IceGuard discharge line, and TripleSafe sump pump. Ryan created a design and explained to the homeowner how our products would help resolve their issue and the homeowner happily agreed to move forward with the installation. 

In about a month, our Foreman, Jeromy A., and his crew arrived at the home for the installation. They began by placing 67ft of CleanSpace on the walls using drilled-in fasteners to ensure it remains in place. Then, they excavated a sump pump pit where the liner and pump would be placed. After this was done, 78ft of WaterGuard was installed around the perimeter of the basement. Two IceGuards are also installed outside of the home. Then, the TripleSafe sump pump is installed and connected to the WaterGuard and IceGuard. After the crew was done with all of the installations, they restored the flooring using concrete, cleaned up their equipment, and left the home. 

Now, our customer can have peace of mind with his basement issues resolved! Are you experiencing something similar? Click HERE and schedule your FREE estimate!

A homeowner in Saint Anthony, MN, recently read a blog post that discusses how radon is a toxic gas that can be found in our homes. He learned that radon is a by-product of uranium, a naturally occurring radioactive element that can be found in soil. As the soil decays, it releases radon, which makes it completely unavoidable. After learning this information, the homeowner decided to purchase a radon testing kit, and after several days, the test results were above 4pCi/L. The homeowner then found our website and contacted us to schedule his FREE estimate. 

In a couple of weeks, one of our Design Specialist arrived at the home. He began inspecting the home, answered any questions the homeowner had, and created a design where the radon mitigation system would be installed. He explained to the homeowner that our system would be installed at the lowest level of the home, that way it tackles the radon-rich air before it can enter the home. After reviewing the proposal, the homeowner decided to move forward with the project. 

In about a month, our Foreman, Dakota M., and his crew arrived for the installation. They began by installing a PVC pipe in the footing and connecting it to the radon mitigation system that would be installed outside of the home. Once they were done, they cleaned up their equipment and left the home.

Now, our customer can breathe fresh clean air! When was the last time you tested the radon levels of your home? Click HERE and schedule your FREE estimate with one of our trained experts!

A homeowner in Loretto, MN, noticed that his current sump pump had overheated, causing the pump to fail. Worried that a failed sump pump would lead to water damage in his home, he decided to look into basement waterproofing in the area and found our website. After browsing our website, the homeowner was impressed with our 5-star reviews and decided to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Eric H., arrived at the home to assess the basement. He inspected the sump pump as well as other parts of the home and answered any questions the homeowner had. After he was done with the inspection, he created a proposal recommending installing our SuperSump+, a sump pump system that is capable of removing 2,200 gallons of water per hour, and IceGuard, an anti-freeze discharge line that allows water to escape in cause the sump pump discharge pipe becomes clogged or freezes. After reviewing the proposal, the homeowner decided to move forward with the project. Eric's design was then sent to our Service Technician, Julio M.

In about a month, Julio and his crew arrived at the home for the installation. The installation was a complete success once 1 IceGuard and the SuperSump+ were installed. The crew then cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing his home is protected from water intrusions! Is your sump pump system working properly? Click HERE and schedule your FREE estimate today!

A homeowner in Long Lake, MN, did not have a sump pump system installed in his basement and was experiencing water damage. He noticed the moisture levels were higher than normal, rotting wood, and damp walls and quickly began searching for the best company for basement waterproofing. The homeowner came upon our website and was highly impressed with our 5-star reviews and before and after transformations, he decided to contact us to schedule his FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home to provide a thorough inspection of the basement and to answer any questions the homeowner had. He then created a proposal with recommendations for the homeowner to review. Our Design Specialist recommended installing our SuperSump+, our sump pump system that is capable of removing 2,200 gallons of water per hour, and IceGuard, our anti-freeze discharge line that allows water to escape if the sump pump discharge line freezes or becomes blocked. After reviewing the proposal, the homeowner happily agreed to the suggestions and scheduled a date for the installation. 

In about two months, our Foreman, Kiko P., and his crew arrived at the home to install the SuperSump+ and 1 IceGuard. They installed the sump pump by excavating a flooring where the pump liner and sump pump would be placed. Then, the sump pump is installed and is connected to the drain system. It is also connected to the IceGuard, which is installed outside of the home. Lastly, the crew restores the floor using concrete. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind with our top-of-the-line sump pump system! Is your sump pump out of date? Don't worry! Click HERE and schedule your FREE estimate!

A homeowner in Wayzata, MN, was coming up on her annual maintenance and was considering installing a battery backup pump so that her sump pump system could still operate in power outages. She realized that the benefits outweighed the potential damage a non-working pump would cause in case the power was out during a storm. The homeowner decided to keep a note as a reminder to bring this issue up during her maintenance with our Service Technician. 

Soon enough, our Service Technician, Kyle H., arrived at the home to inspect the SuperSump+ we had previously installed, as well as address any concerns the homeowner had. During the inspection, the homeowner informed Kyle of her worries. Kyle ended up recommending installing our UltraSump battery backup pumping system, which is capable of removing 12,000 gallons of water on a full charge. After the homeowner agreed to the project, the homeowner scheduled a day for our crew to install it.

In about a week, our crew arrived at the home to install the UltraSump in the SuperSump+. Once they were done, they cleaned up their equipment and left the home.

Now, our customer can guarantee that her basement will remain dry no matter the weather conditions! Is your sump pump out of date? Click HERE and schedule your FREE estimate today!

A homeowner in Maple Grove, MN, grew concerned when the sunken concrete slabs caused cracks to grow along her driveway and pose a trip hazard. Worried that it would lower the resale value of the home and for the safety of her family, she decided to look into concrete lifting and leveling and found our website. After browsing our website, the homeowner was impressed with our 5-star reviews and decided to contact us to schedule her FREE estimate. 

In a couple of months, our Design Specialist, Dave S., arrived at the home to conduct a proper inspection. He explained to the homeowner that one of the common causes of sinking concrete slabs is soil compaction and settling. When the soil's load-bearing capacity is exceeded, the soil supporting the slab will expand and contract, causing the slab to sink and heave. For this reason, Dave recommended our PolyLevel, a high-density waterproof polyurethane formula that allows for accurate leveling of concrete slabs, and NexusPro, a silicone-based sealant that provides long-lasting durability along the joints and cracks of the slab. After reviewing Dave's proposal, the homeowner happily agreed and decided to move forward with the project.

In about a month, our crew arrived at the home to carry out the installation. PolyLevel is installed by drilling small holes into the concrete slabs and installing the injection ports. PolyLevel is then injected beneath the slab, filling in the spaces in the soil. Once the slab has been lifted, the crew ensures it is level before sealing the holes with concrete. Lastly, the crew uses NexusPro to seal the cracks and joints. After they were done with the installation, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind with her smooth and crack-free driveway! Are you experiencing something similar? Click HERE and schedule your FREE estimate with one of our experts!

A homeowner in Saint Bonifacius, MN was concerned that his sunken walkway and garage apron would be a trip hazard reducing the curb appeal of his home. So the homeowner decided to look into concrete lifting services in the area and found our website. He was extremely impressed with our before and after photos and decided to contact us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Brad W., arrived at the home to answer any questions the homeowner had and to provide a thorough inspection of the walkway, driveway, and garage. During his inspection, Brad explained to the homeowner that one of the common causes of settling slabs is soil compaction. When a soil's load-bearing capacity exceeds, it causes the soil to expand and contract beneath the concrete. Over time, the slab will sink and sometimes form cracks. For this reason, Brad recommended our PolyLevel to lift the concrete along the sidewalk and garage apron, as well as NexusPro, to seal the joints between the walkway and step and where the garage and driveway meet. After reviewing Brad's proposal, the homeowner happily agreed and decided to move forward with the project.

In about a month, our Foreman, Patrick B., and his crew arrived at the home for the installation. They began by drilling small holes into the slab and inserting the injection ports. PolyLevel is then injected beneath the settling slab. Once the slab has been lifted, the crew ensures it is level before sealing the holes with cement. Lastly, the crew sealed the joints. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind with his smooth walkway and garage apron! Are you experiencing something similar? Click HERE and schedule your FREE estimate today!

A homeowner in Minneapolis, MN noticed that his concrete back porch had begun sinking causing an uneven surface that is a trip hazard. Concerned it would continue to worsen, the homeowner decided to visit an upcoming home show to see which companies would be able to help. In the home show, he found our booth and spoke with one of our Design Specialist, Romeo V., about his concerns and decided to schedule a FREE estimate. 

In a couple of weeks, Romeo arrived at the home to assess the back porch and explained that soil washout is one of the common causes of settling concrete. When it rains or floods, water moves through the ground and washes away supporting soils keeping the concrete slabs leveled. Over time, gaps and voids and created in the soil causing the slab to sink and form cracks. For this reason, Romeo recommended our PolyLevel, a water-resistant polyurethane foam expanding formula engineered to lift settled slabs, and NexusPro, a silicone-based sealant designed for joints and cracks. After reviewing Romeo's proposal, the homeowner happily agreed and scheduled the installation date.

In about a month, our Foreman, Dylon V., and his crew arrived at the home for the installation. They began by drilling small holes into the slabs and installing the injection ports. Using the injection gun, PolyLevel is injected beneath the concrete slab, expanding and filling in the empty spaces in the soil. Once the slab has been lifted to the desired level, the crew seals the holes with cement. Lastly, they used NexusPro to seal the joints and repair the cracks that had formed. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing his back porch is no longer a trip hazard! Are your concrete slabs settling? Don't worry! Schedule your FREE estimate today by clicking HERE!

A homeowner in Minnetonka, MN noticed that her back walkway had begun sinking causing the walkway to become uneven and a trip hazard. Concerned for her family, she decided to look into concrete lifting and found our website. After browsing through our website the homeowner was extremely impressed with our before and after photos and decided to contact us to schedule her FREE estimate. 

In a couple of weeks, one of our Design Specialists arrived at the home to inspect the concrete and answer any questions the homeowner had. He explained to the homeowner that one of the common causes of settling concrete is soil washout. When it rains or floods, water moves through the ground underneath the slab and washes away the supporting soils. Over time, this causes gaps and voids in the soil and leads to the slab sinking. For this reason, our Design Specialist recommended PolyLevel, a water-resistant polyurethane foam expanding formula that is designed to lift settling slabs. After reviewing the proposal, the homeowner happily agreed and scheduled the installation.

In about a month, our Foreman, Dylon V., and his crew arrived at the home for the installation. They began by drilling small holes into the slabs and inserting the injection ports. Using the injection gun, PolyLevel is injected beneath the slab, expanding and filling in the voids in the soil until the slab is lifted to the desired level. Once they were done, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind his walkway is leveled! Are you experiencing something similar? Schedule your FREE estimate today by clicking HERE!

A homeowner in Plymouth, MN recently learned about the dangerous health risks of radon. The homeowner learned that radon is a by-product of uranium, a naturally occurring radioactive element that can be found in soil. As the soil decays, it releases radon and creates a high toxicity level in the air. After learning that information, the homeowner quickly searched for radon mitigation services and found us. He then contacted us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Kyle P., arrived at the home to set up a continuous radon monitoring test and to answer any questions the homeowner had. Kyle reassured the homeowner that even if the test results were not at dangerous levels, it was always good to test the radon levels of your home every 2-5 years. In a couple of days, the test results were above 4 pCi/L, which is the required action for radon, and the homeowner contacted us to move forward with the project.

In about a month, our Foreman, Dakota M., and his crew arrived at the home for the installation. They began by installing a PVC pipe into the footing and connecting it to the radon mitigation system which would be installed outside of the home. This is done this way so that our system can suction out the radon-rich air and spew it outdoors before it can enter the home. Once they were done with the installation, they ensured it was working properly before cleaning up their equipment and leaving the home.

Now, our customer and his family can breathe fresh and clean air! When was the last time you tested the radon levels of your home? Schedule your FREE estimate today by clicking HERE!

A homeowner in Richfield, MN noticed that the walkway at the back of her home had begun sinking and was a trip hazard. Concerned for her friends and family, she decided to address the issue right away by contacting us to schedule her FREE estimate. 

In a couple of weeks, our Design Specialist, Tony B., arrived at the home to provide a thorough inspection of the concerns and to answer any questions the homeowner had. Tony explained to the homeowner that soil washout is one of the most common causes of sunken concrete. When it rains or floods, water moves through the ground and washes away supporting soils keeping the slabs upright. Over time and as this continues, gaps and voids can be found in the soil and the slab would begin to sink. To fix this issue, Tony recommended PolyLevel, our waterproof foam expanding formula that is specifically engineered to lift concrete slabs. After reviewing the proposal, the homeowner happily agreed and scheduled the installation date. 

In about a month, our Foreman, Troy J., and his crew arrived at the home for the installation. They began by drilling small holes into the concrete slabs and inserting the injection ports. PolyLevel is then injected beneath the slab, filling in the empty spaces in the soil. Once the slab has been lifted to the desired level, the crew seals the holes with cement. 

Now, our customer can have a smooth walkway free from any trip hazards! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

In Maple Grove, MN, a homeowner was facing a troublesome concrete step. Every time anyone steps over it, it wiggles because a gap has formed beneath the slab. Worried this was a trip hazard, the homeowner quickly searched for concrete lifting in the area and found us. After browsing through our website, the homeowner grew impressed with our before and after transformations, so he contacted us to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Kyle P., arrived at the home for the inspection. He noticed that the step slab had begun leaning forward, and the homeowner tried to fix the issue by placing a pipe underneath the slab to keep it upright. Kyle explained to the homeowner that he knew the perfect solution, PolyLevel and NexusPro. PolyLevel is our high-density foam expanding formula that expands once injected into the slab. It is an ideal solution compared to replacing the concrete or mudjacking. NexusPro is our silicone-based sealant that is UV resistant, so it will not crack and is highly durable. After reviewing Kyle's proposal, the homeowner happily agreed, and Kyle's design was sent to our Foreman, Patrick B.

In about a month, Patrick and his crew arrived at the home for the installation. They lifted the slab by first drilling small 3/8" holes into the slab and inserting injection ports into the holes. PolyLevel is then injected beneath the slab, lifting it. Once it is lifted to the desired level, the crew seals the holes with cement. Lastly, the crew used NexusPro to seal the joints. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer's concrete issues have been fixed! Are you experiencing something similar? No worries! Click HERE to schedule your FREE estimate today!

A homeowner in Minneapolis, MN, was extremely concerned for his foundation walls when he noticed that the cracks had grown larger and extended to more than one part of the wall. Knowing the issue would continue to worsen unless addressed, the homeowner began searching for foundation repairs in the area and found our website. After browsing through our website, the homeowner grew impressed with our before and after photos and decided to schedule his FREE estimate with our Design Specialist, Brian R.

In a couple of weeks, Brian arrived at the home for the inspection and to answer any questions the homeowner had. Brian explained to the homeowner that we have just the right products to permanently stabilize the foundation walls, our PowerBrace and GeoLock. PowerBrace consists of steel I-beams that run parallel to the foundation wall, and GeoLock is our wall anchor system where earth anchors are placed and connected to the interior wall. Both products are permanent solutions to foundation issues and can be tightened to straighten walls over time. After reviewing Brian's proposal, the homeowner happily agreed and scheduled the installation date.

In about two months, our Foreman, Francisco E., and his crew arrived to install 3 PowerBrace and 2 GeoLock. The installation was a complete success, and the crew did not run into any issues. After they were done, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind with his permanently stabilized foundation walls! Have you noticed wall cracks in your basement? Click HERE and schedule your FREE estimate today!

A homeowner in Minneapolis, MN, had kept putting off getting his garage floor repaired, but regretted it as soon as he realized it would be a trip hazard. The homeowner quickly took action by searching for concrete lifting in the area and found our website. After browsing our website, the homeowner was impressed with our 5-star reviews and decided to schedule his FREE estimate. 

In a couple of weeks, our Design Specialist, Dave S., arrived at the home to provide a thorough inspection. During the inspection, he explained to the homeowner that one of the common causes of settled slabs is soil compaction. When cars drive over the floor and park, it puts a tremendous amount of pressure, causing the soil to compact and settle. To fix that issue, Dave recommended our PolyLevel, a foam expanding formula that is designed to accurately lift settling slabs. After reviewing Dave's proposal, the homeowner happily agreed to his recommendation.

In about a month, our Foreman, Dylon V., and his crew arrived at the home for the installation. They began by drilling small 3/8 inch holes into the slabs and inserting the injection ports. PolyLevel is then injected beneath the slab, filling in the empty spaces in the soil. Once the slab has been lifted to the desired level, the crew seals the holes with cement. Lastly, they cleaned up their equipment and left the home.

Now, our customer has a smooth garage floor! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!