Quality Foundation & Crawl Space Repair & Concrete Raising in Onalaska, WI

A homeowner in Onalaska, WI, noticed their sidewalks were significantly uneven. Worried this would become a hazardous issue, the homeowner knew they needed to find an expert to provide them with a solution. Unsure who to work with, the homeowner began looking into "fixing a concrete sidewalk near me". One of the first companies to catch their attention was us, American Waterworks. Since they were already on our website, the homewoner decided to sign up for their FREE estimate. After this estimate was set, the homeowner prepared for the arrival of our Design Specialist, Will. A few days later, Will traveled to the home to begin the detailed inspection. During his inspection, Will confirmed the sidewalk was suffering from settlement. To prevent the settlement from continuing, Will recommended inserting PolyLevel underneath the struggling exterior concrete. Knowing this was their best action plan, the homeowner decided to proceed with the recommended plans. Next, the homeowner passed the plans to our Logistics team to build and finalize the plans. Once they received the plans, our Logistics team gave the final stamp of approval and scheduled it for the following weeks. When the project date arrived, our Foreman, Sam, and his crew traveled to the home to begin the detailed inspection. First, Sam and his crew began by installing PolyLevel underneath the struggling sidewalk. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Crack Repair, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After the products were secured, the crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew, so they left a five-star review. If you notice your concrete is struggling from the same issue, sign up for your FREE estimate today! 

A homeowner in Onalaska, WI, noticed there was a significant drop from the first step of their home. Unsure of the cause, the homeowner knew they needed to find a permanent solution to the issue. The homeowner looked into "sinking step repair near me", and one of the first companies to grab their attention was us, American Waterworks. Impressed with our concrete before and after photo albums, the homeowner knew we were the ideal choice for their home. Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Will. When the appointment arrived, Will promptly arrived at the home and began the detailed inspection of the home. During his walk through, Will found that several slabs were sinking into the ground. To prevent the sinking from continuing, Will recommended lifting the slabs back into place with PolyLevel. After hearing the benefits of PolyLevel, the homeowner knew this was their best plan of action. Once the homeowner approved, the proposal was passed along to our Logistics team to build and prepare the project. Once the project details were ironed out, our Logistics team assigned the project withour Foreman, Sam. A few short weeks later, Sam and his crew traveled to the home to begin the installation. First, Sam and his crew started by inserting PolyLevel underneath the steps and sidewalk. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. After all the products were secured, Sam and his crew cleaned up their materials and left the home. The homeowner was in awe of the transformation by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

In Onalaska, WI a homeowner was outside enjoying the warm weather in his front yard when he noticed something about his front stoop. There was a large gap between the porch space and the step, and he realized that it had most likely sunk over the years to be at its current state. The homeowner already had some concerns about his driveway and the uneven slabs that his car drove over every day. He knew that with this new concrete problem he discovered, an expert needed to be called for help with repairs. Online he looked up services in the Western Wisconsin area and once he found the American Waterworks website, quickly became interested in our PolyLevel foam injections. He signed up for one of our FREE estimates and one of our Design Specialists, Will Reader, headed out to the home for the inspection. Will measured the concrete areas and developed a plan for how to fix the sinking concrete problems and smooth out the surfaces. The homeowner trusted Will's knowledge and agreed to the installations that he proposed. Later, our Foreman, Troy Johnson, and his crew went to the site to carry out the project plans. The crew first drilled small pencil-sized holes in the concrete stoop and driveway and inserted ports in the holes to reach the empty space below the concrete. Then, the carried out the PolyLevel injections in the driveway until the slabs were all level again and the stoop was raised back up to the porch. Finally, the crew filled in the holes, joints, and cracks with NexusPro sealant and spread some native sand on top for a smooth final look. The homeowner was happy with the results and knew he would recommend our services to his friends and family.

Are you interested in our concrete repair services? Get your FREE no-obligation estimate with us today for the process to start!