Professional Waterproofing, Concrete Lifting & Foundation Repair in Washington County, MN

Marsha Z. in Stillwater, WI was experiencing moisture and humidity in her crawl space. She was concerned about how it could impact her air quality and she was frustrated that she was losing heat through that space. She contacted American Waterworks and we sent our Design Specialist, Shane Nephew, to her home to do a free onsite evaluation. He confirmed that her concerns were valid, answered her questions, and developed a plan to install a barrier to separate her crawl space from the earth. 

Our crew installed drainage matting and CleanSpace in her crawl space to block moisture from entering that space, make her home more energy efficient and to keep pests out. The installation of these waterproofing products was a quick and non-invasive process. Marsha now has peace of mind that her air quality to improved and that her crawl space is permanently sealed.

Stephen W. in Forest Lake, MN had water seeping into his basement and he did not have a sufficient sump pump to discharge the water from the home. He decided to contact us for a free estimate and see how we could help. We sent a Design Specialist to his home to inspect the situation and to develop a solution. Our Design Specialist determined that the best way to ensure that Stephen would never have to worry about a wet basement would be to install WaterGuard around the perimeter of the basement and a SuperSump sump pump to properly expel the water to the outside. Stephen agreed that this was the right plan for his basement, so we sent a crew there to install our system.

Our crew removed the concrete around the perimeter of the basement and laid the WaterGuard drainage system which led to the new sump pump that they installed. Then, they installed the discharge line from the sump pump to outside of the home, which is where the water drains to. The installation took a couple of days, but Steven will reap the benefits of this system for a lifetime. Since the installation, he has had a dry, clean basement. Our waterproofing system is backed by a lifetime warranty, so Stephen can rest easy knowing he invested in permanently protecting his home from water seeping into his home and causing damage.

Zach W. was frustrated that his back patio had sunk a few inches after the change of season. He was hoping he could find an affordable solution to raise his concrete instead of replacing it altogether. While researching concrete repair contractors, he found American Waterworks and was interested in learning more about our PolyLevel concrete repair solution. He gave us a call and set up a time for one our Design Specialists to come to his home and give him a FREE estimate. 

Our Design Specialist assured him that we could raise and level his concrete back to where it was in a cost-effective and non-invasive manner. Zach was pleased to hear this, so he set an appointment for the PolyLevel injection. Our PolyLevel experts drilled penny-sized holes into the concrete slab to inject the foam. The foam only takes 30 minutes to cure once it has been injected, so Zach was able to see the transformation almost immediately. The entire process took about 2 hours to complete. Zach is pleased that he found a more affordable and durable concrete repair option through American Waterworks.

 John B. in Afton, MN noticed that his concrete walkway had settled a few inches, creating a large step down from the door.  He wanted to find an effective and affordable way to repair his concrete instead of having to replace it. 

He found American Waterworks and was interested in the PolyLevel concrete repair solution that we offer. He wanted to learn more, so he gave us a call and we sent one of our Design Specialists, Kevin McWithey, to his home to provide him with a FREE onsite estimate. John was pleased to learn that our PolyLevel foam injection is a more affordable, non-invasive and durable alternative to traditional concrete repair.

Our PolyLevel experts drilled small holes into the concrete slabs where the foam would be injected. Then, the foam was injected until it was raised back to its original height. The cracks in the concrete were sealed with our Nexus Pro sealant and the process was complete. John was able to see the transformation almost immediately because once the foam is injected it takes only 30 minutes to cure. John was glad he chose do go with the PolyLevel repair option provided by American Waterworks.

David H. in Hugo, MN realized that his basement had started to sink, and the corner of their new addition they added to their home was also starting to sink. A friend recommended that he give American Waterworks a call because they had a good experience with us in the past. David decided to contact us for a free estimate, so we sent one of our Design Specialists, Jeremy Radtke, to his home to evaluate the situation and provide a solution. Jeremy explained that the best solution to permanently repair their foundation would be to install helical piers, which would support the foundation of the home. David knew that if he decided to wait and the foundation failed, it would be a very expensive fix, so he decided that he wanted to invest in the long-term protection of his home.

Our production team began the installation process by digging down to the foundation of the home. They installed 4 helical piers under the foundation of the basement, which transfers the weight of the home from the unstable soil, to the pier. They also installed 3 piers under the newly added deck which had recently started to sink. David’s home was starting to sink because the soil it was built on was not supportive enough, but his foundation is now permanently supported because of the installation of our piers. Our piers are guaranteed for a lifetime, so David will never again have to worry about his foundation failing.  

Gregg P. in Marine on Saint Croix, MN was suffering from large amounts of water pouring into his basement during heavy rains. He did not have an existing waterproofing system in place, so his basement had no protection from the water leaking in. He began looking for a waterproofing contractor and he found American Waterworks’ website. He was pleased to see that we have almost 30 years of experience with waterproofing, so he called us to set up a FREE estimate. One of our Design Specialists, Shane Nephew, went to his home to inspect his basement and design a solution. Gregg was please with Shane’s solution, so he scheduled the installation.

Our production team installed a section of our WaterGuard drainage system, a SuperSump sump pump and our CleanSpace vapor barrier system over the area where water was leaking in. The drainage system directs water to the sump pump and from there, the sump pump pushes the water through the discharge line out and away from the home. The CleanSpace acts as a barrier to protect from moisture and potential mold growth. Gregg’s basement is now a dry and healthier space. He is glad he invested in protecting his most valuable asset.

A church in Lake Elmo, MN was suffering from water leaking up through the floor in their basement. Each time they experienced a heavy rain, they had to deal with a wet basement and they were becoming more and more concerned about the health implications that can come from having a wet basement. They contacted the waterproofing experts at American Waterworks to receive a FREE estimate. One of our Design Specialists went onsite to inspect the situation and they were able to develop a thorough plan to fully waterproof the basement. They were pleased with the proposal we presented to them, so they scheduled the installation.

Our production team installed our WaterGuard drainage system along the perimeter of the basement floor and a TripleSafe sump pump- which is our most reliable sump pump. A SaniDry dehumidifier was also placed in the basement to control the humidity in that space. Water is now guided through the drainage system, to the sump pump and from there, the water is discharged from the home. The church is pleased that they have had a dry and healthier basement since the installation of our waterproofing system.

Kara B. in Scandia, MN was suffering from water leaking into her basement. She was frustrated because a few of her belongings had been ruined from water damage and she was tired of the mess she had to clean up every time there was a heavy rain. She contacted American Waterworks for a FREE estimate, so we sent a Design Specialist to her home to inspect her situation and develop a solution. She was pleased with our proposal, so she scheduled to have our waterproofing system installed. 

Our production team started the installation by removing the concrete around the perimeter of her basement. They laid our WaterGuard drainage system where the concrete was and filled back the gaps with rock. Then, they placed the sump basket and installed the pumps. Once our waterproofing system was in place, they replaced the concrete and cleaned up. Kara is happy she chose to protect her home. Her basement is now a dry, healthier space. 

Jeff L. in Saint Paul Park, MN realized that his concrete has sunk a couple of inches creating a large lip from the concrete garage floor. It had become a trip hazard for him and his family, and they were tired of the large bump they felt each time they drove in and out of the garage. While researching concrete repair, he found the American Waterworks website. He contacted us for a FREE estimate, so we sent a Design Specialist to his home to inspect the concrete and provide a solution.

Our PolyLevel experts started to repair the concrete by drilling small holes into the concrete slabs and they injected the polymer foam until the driveway was even with the garage floor. The process only took a couple of hours, and Jeff was very happy with the results. He is glad he had his concrete repaired by American Waterworks.

Elaine W. in Lakeland, MN was experiencing moisture problems in her basement. She was worried about how high the humidity was and that she might start to develop mold. She contacted American Waterworks to have a free inspection and estimate for her basement. One of our Design Specialists, Chad Johnson, went onsite to do a thorough evaluation and provide her with the best solution for her needs. Chad determined that there was a moisture problem in her basement that could easily be controlled by installing a SaniDry dehumidifier.

Elaine was pleased to hear this, so she set a date to have the SaniDry installed. Our SaniDry can remove up to 109 liters of water per day and dries up to 2,500 sq. ft. It has a digital control panel and can easily be stored in a corner of a basement. Our SaniDry dehumidifier also filters the air, creating a dry and cleaner home. Our dehumidifiers are more powerful and energy efficient than ever! Elaine was happy with the noticeable difference in her basement after having the dehumidifier installed.

To learn more about our dehumidifiers, click here!

Keith B. of Sartell, MN had water leaking from his pre-existing sump pump, making him feel nervous about mold build-up and water moisture problems. He did some research on our website and called our office line to set up a FREE Estimate with our Design Specialist, Josh Schultz. Josh went to his home, inspected his problems, and came up with a solution. After a thorough explanation and estimate, Keith got all of his questions answered and was comfortable with the product, so he scheduled an installation date. 

Our Foreman, Austin Lucas, and his production crew began the installation by breaking out the concrete around the pre-existing sump pump and replacing it with our TripleSafe Sump Pump System. Our TripleSafe provides three layers of protection, it solves all three water problems in one system, and it comes with a battery back-up. To complete the project, Austin and his crew applied new concrete. Keith was happy with the results and had a great experience with our team! 

A homeowner in Newport, MN had water leaking through their floor joists, causing them to worry about the health and maintenance of their basement. They got in touch with our office staff and scheduled a FREE Estimate with our Design Specialist. Our Design Specialist went to their home, carefully diagnosed their problems, and came up with a solution that fit their needs. The homeowner was confident with our Design Specialist's proposal of our WaterGuard System, so they went ahead with the project. 

Our Foreman and his production team began the project by breaking out the concrete floor perimeter of the basement, forming a drainage trench. In the trench, our team installed our WaterGuard System, which is made to collect water leaking from basement walls, serve as an underground drain, and prevent water or mud clogs. To complete the project, our team covered the open floor gaps with river rock, providing a smooth surface, and applying our concrete over it. The homeowner was happy with the outcome and their peace of mind was restored! 

Kathy L. of Bayport, MN had water leaking into her basement. She had previous work done by American Waterworks and was happy with the work, so she decided to get work done by us again. She got in contact with our office staff and scheduled a FREE estimate. Our Design Specialist went to Kathy's home, carefully inspected her water leakage, and proposed our WaterGuard Below Floor Drain. Kathy was confident in our interior drainage system and its features, so she went ahead with the project. 

Our Foreman and his crew broke out the concrete floor perimeter, forming a trench. In the trench, our crew installed our WaterGuard, which prevents mug clogs and collects water leaks from basement walls. To complete the project, our crew filled the open gaps with river rock and applied a new layer of concrete over them. Kathy was happy with the work and her peace of mind was restored! 

At American Waterworks, we provide FREE estimates for all of our services! Give us a call today or click HERE to request and schedule your FREE estimate. 

A female homeowner of Bayport, MN was in need of a new sump pump system. She worked with American Waterworks for the project. Our Design Specialist proposed our TripleSafe Sump Pump, which is the best sump pump that we provide for homeowners. The homeowner was confident in our sump pump, so she went ahead with the repairs.

Our crew started the project by breaking out the concrete floor of the basement, forming a hole. In the hole, our team installed our TripleSafe Sump Pump System, which triples the protection and solves all three water problems in one unit. Once the sump pump was installed, our team installed our discharge line, which is a pipe that discharges the water out of the basement and away from the foundation, which leads to the outside of the house. Our crew filled the gaps with rock and applied a new layer of concrete over them. 

Is water leaking into your basement or are you looking into getting a sump pump installed in your home? Give us a call today or click HERE to request yours online. 

A homeowner in Bayport, MN had water leaking from their basement wall and they wanted to get a vapor barrier installed that would prevent that from happening. They had American Waterworks come out and do the work. Our Design Specialist proposed our CleanSpace Wall System Vapor Barrier, which is made to prevent water moisture and humidity, as well as provide brightness to the basement. 

Our Foreman and his production crew installed 25 feet of our CleanSpace alongside the leaking wall. After the installation, you could already tell a difference! The homeowner was happy with the work that was done and was grateful we were able to help them with their problems. 

We provide FREE estimates for basement waterproofing, foundation repair, crawl space repair/encapsulation, radon testing/mitigation, and concrete repair/lifting. Give us a call today or click HERE to request your FREE estimate! 

Justin and Megan S.'s house was settling, causing them to worry about their safety and going about daily activities. They got in contact with American Waterworks after seeing that we provide FREE estimates. Our Design Specialist went to their house to inspect their settling home and provide a solution that would fit their needs and budget. After a thorough and complete inspection, our Design Specialist proposed our Helical Piers, which are designed to lift your home back to its original position. These piers are mechanically installed into the soil, and they are installed to appropriate depths which will eventually prevent any future settlement down the road. Justin and Megan were confident in the product and its many features, so they signed our proposal, got a date scheduled for the installation, and moved forward with the project. 

We provide FREE estimates for all of our services! Click here to schedule yours today.

Our customer, Amy, from Lake Elmo, MN, reached out to us when she had enough of cracks forming on her garage concrete slab floor. Amy was afraid that if she didn't fix the issue soon, the cracks would get worse and create a much larger problem down the road. When Amy called in, we were able to set her up with our FREE estimate. A Design Specialist from our Concrete and Radon division was able to go out to the property and do a thorough inspection to see what we could do to help Amy. When he had finished, he recommended that Amy invest in our lifting and leveling option for her concrete. He suggested she do so fairly soon before the issue had a chance to get any worse. Amy agreed and our Foreman, Troy, and his crew were on the scene shortly after. The crew began the process by strategically drilling holes into the concrete slab that they then filled with our PolyLevel injection, an expanding polyurethane foam that fills the gaps caused by soil erosion to raise and stabilize concrete surfaces. The crew kept a close eye on the slab as the foam expanded, reaching the appropriate height. After the PolyLevel stage was finished, Troy and his crew finished the job by sealing any remaining holes or joints with our NexusPro solution, a silicone-based sealant specially formulated to provide long-lasting flexibility and stand up to harsh weather conditions. 

When the job was complete, Amy was happy with the work we had done and was relieved to know that her cracked concrete issues were worries of the past. 

Robert and Teresa from Saint Paul Park, MN, gave us a call when they began to notice that their kitchen floors were becoming increasingly uneven. They feared that the issue was structural in nature, so they contacted us to see what could be done. When they called in, we set them up with our FREE estimate, and we sent our Design Specialist, Shane, who was able to get out to the property to do a thorough inspection. When he finished his walk-through, he informed the homeowners that the issues were stemming from their basement foundation. Shane recommended that they invest in our SmartJack system, which provides support for sagging beams, restoring stability and straightness. These I-shaped beams have the option to be tightened over time, making them the ideal solution for uneven floors. Our Foreman, Tremaine and his crew ended up installing 7 SmartJacks throughout the basement of the home, strategically placing them below the stairs and in the areas of the basement where the sloping ceilings were the worst. 

Once the job was done, both Robert and Teresa were pleased with the work we had done and were happy knowing that their new system had the option to be tightened over time, giving them peace of mind for a long time to come. 

A customer from Forest Lake, MN, gave us a call when he began to notice that his front porch steps were beginning to sink into the soil beneath the home. When he called in, we set him up with our FREE estimate, and our Design Specialist, Brian, headed out to the property to do a thorough inspection of the issue and make recommendations about how we could best help him. Brian recommended our Lift and Level option for this project. The customer agreed and work began shortly after. Our Foreman, Jose, and his crew began by strategically drilling holes into the stairs of the property, and then injected our PolyLevel foam into the holes and monitored the lifting process. Our PolyLevel solution is an expanding polyurethane foam that, when injected below a concrete slab, fills the gaps caused by soil erosion and is used to raise and stabilize concrete surfaces. Along with this solution, the crew installed two of our Helical Piers under the stoops to provide extra straightening and stability. Our helical piers are the best solution for lifting lighter loads and the installation is fast, effective, and have a great deal of versatility for stabilizing and restoring foundations and masonry elements alike. When the job was completed our customer was satisfied with the work we had done and was happy to know he didn't have to worry about his steps sinking any further. 

If this issue sounds familiar to you, click HERE to schedule your FREE estimate today!

Matt and Christine, of Stillwater, MN, got in contact with us when they began to notice the concrete slabs of their front patio were sinking, causing water to drain towards the foundation. They were afraid if they didn't look into fixing the issue, they would face water damage in their home or an increased risk of a tripping hazard due to the uneven concrete. When they called in, we set them up with one of our FREE estimates with one of our Design Specialists, Chuck. Once Chuck arrived at the property, he did a three-hour thorough inspection into the issue and in the end, made his recommendations as to how we could help the couple. Chuck recommended that they let us lift the concrete using our PolyLevel injection, and finish off the project by sealing the project in with our NexusPro solution. Chuck went on to explain that our PolyLevel is an expanding polyurethane foam that is injected beneath the concrete slab to fill the gaps caused by soil erosion and raises and stabilizes the concrete surface. The process for this injection is fairly quick and non-invasive for the homeowner. The slabs in question can be ready to use in 15 minutes from the time the solution is injected. Chuck also explained that our NexusPro is a silicone-based sealant for joints and cracks and is specially formulated to provide long-lasting flexibility and stand up to harsh weather conditions. Unlike traditional sealants, NexusPro resists UV rays, meaning it won't crack, bubble, or dry out which translates into a long-lasting seal on your concrete. The couple agreed to the work and renovations began shortly after.

Our Foreman Tyler and his crew began the process by strategically drilling holes into the problem slabs. Next, they injected the foam into the holes and closely monitored the raising process to ensure that the slabs got back to their original position. Once the slabs got back into place, they finished the project by applying our NexusPro solution to the joints, the space between the home's foundation and the concrete, and the cracks that had formed on the slabs of concrete to ensure that no water would get under the slabs. 

Once the job had been completed, the homeowners were happy to see that the level concrete would keep water away from the home. 

If this problem sounds similar to the one you're facing, click HERE to schedule your FREE estimate! 

Camy M. from Saint Paul, Mn started to see that the concrete slabs from her driveway started to settle and began to crack. Camy felt as if it was left unchecked it might worsen over time causing potential hazards. Camy then contacted the Appointment Center here at American Waterworks to claim her FREE estimate, which entitles her to a free home inspection by one of our Design Specialists. Once scheduled and the thorough home inspection is completed, our Design Specialist proposed to Camy that the best solution would be to invest in our PolyLevel solution along with our NexusPro solution. The PolyLevel injection is a polyurethane foam that is injected beneath the concrete to fill the voids that are caused by soil erosion and help stabilize the concrete slabs. Camy agreed and scheduled the date of installation. 

Our Foreman and his Production crew then arrived at the property by strategically drilling holes in the problem slabs and then injecting the PolyLevel foam. After this process is done, the crew followed by using our NexusPro solution, a silicone-based sealant that seals the joints and cracks to protect the PolyLevel foam from water and water vapor. The NexusPro solution is a solution that has a protectant against UV light which prevents it from drying and deteriorating, protecting the PolyLevel at the maximum capacity. 

Camy loved how her driveway looked good as new and was satisfied with the project!!

If you're in a situation similar to Camy's, contact us today to speak with someone about scheduling your FREE estimate! 

A homeowner in Afton, MN, grew nervous over the separating blocks on the garage walls. After hearing wonderful reviews around their neighborhood, the homeowners chose to work with American Waterworks. The homeowner visited our site and signed up for their FREE estimate. Our Design Specialist, Darin, traveled to the home to complete an in-depth evaluation of the walls and foundation. Following his evaluation, Darin determined the garage was beginning to settle. Darin recommended that the homeowners stabilize their foundation and walls, to which they agreed. Our Foreman, Juan, and his crew were assigned to complete the job. 

Upon arrival, Juan and the crew began by installing four PowerBraces along the southern wall. PowerBraces is a patented foundation wall repair system that is designed to stabilize failing foundation walls and has the potential to straighten them over time. The crew begins by cutting the steel I-beam wall braces to fit the walls. Then they secure the floor with joist hardware by attaching it near the mudsill at the top of the wall. Then the PowerBraces are fine-tuned into position and attached to the floor. The crew then shifted their focus to installing the SmartJacks near the middle of the west wall. The SmartJack system provides solid support for sagging and undersized beams, restoring stability and straightness to sagging floor joists in crawl spaces. Like PowerBraces, SmartJacks can be adjusted over time to provide additional straightening. After the walls and foundation were properly stabilized, the crew installed CleanSpace along the entire west and south garage walls. CleanSpace is a 100% waterproof plastic vapor barrier that is ideal for unfinished basement walls. The crew installs CleanSpace by drilling it in place with plastic fasteners. The crew completed the installation and stabilization successfully. The homeowner was pleased that their garage was no longer at risk for further damage. If you are experiencing a similar issue, sign up for your FREE estimate today!  

A homeowner in Afton, MN, noticed the sections of their sidewalk were beginning to overlap. Knowing this could become a safety concern, the homeowner sought to have the concrete repaired. Overwhelmed by all the options, the homeowner asked their neighborhood Facebook group for suggestions. Many members of that group suggested American Waterworks. The homeowners called our Appointment Center and signed up for their FREE estimate. After the estimate was finalized, the homeowner prepared for the arrival of one of our Design Specialists. Soon after they arrived, the Design Specialist thoroughly inspected the concrete. Following their inspection, the Design Specialist concluded that the concrete was sinking into the ground. After discovering the issue, the Design Specialist recommended that the concrete be lifted and leveled and cracks be filled. Knowing this was their best option, the homeowners agreed and production preparations began. Our Foreman, Sam, and his crew arrived at the home to start production. First, the crew inserted the PolyLevel underneath the sinking concrete. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the job was complete, the crew cleaned up the job site and left the home. The homeowners were thankful for the wonderful job well done. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Cottage Grove, MN, was enjoying their front porch when the overlaps in their sidewalk caught their eye. Wanting to avoid further damage, the homeowner began searching for an expert to inspect their sidewalk. During their search, the homeowner came across our Facebook page and noticed our impressive previous jobs. The homeowner then went to our website and saw we offer concrete lifting and leveling services. Wanting to avoid replacing the concrete, the homeowner decided to sign up for their FREE estimate. After the details were finalized, the homeowner prepared for the arrival of one of our Design Specialists. Once they arrived, the Design Specialist began their detailed inspection of the sidewalk and stairs. The Design Specialist determined that the concrete was sinking, causing the overlap. To stop the sinking, the Design Specialist recommended that the concrete be lifted and leveled and cracks be repaired. Wanting to solve the issue, the homeowners agreed and a crew was assigned to the job. Our Foreman, Sam, and his crew arrived at the home and began by installing the PolyLevel underneath the sinking concrete. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the cracks were sealed, the crew cleaned up their site and left the home. The homeowners were relieved to know their sidewalk was no longer sinking. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Forest Lake, MN, grew concerned regarding the many cracks throughout their sidewalk. Unsure of what caused the cracks, the homeowners decided to get an expert to provide them with some answers. Overwhelmed by all their options, the homeowner decided to ask their local Facebook group for referrals. Several members of the group linked to our Facebook page, so the homeowner decided to check it out. Impressed by our excellent work, they decided to visit our website and sign up for their FREE estimate. After setting up their FREE estimate, we sent one of our Design Specialists to complete the job. Once they arrived, they completed their detailed inspection and were able to determine that sinking was the root of the issue. The Design Specialist recommended that the sidewalk be lifted and leveled to prevent further sinking and cracking. After deliberating their options, the homeowner agreed with the Design Specialist's plan and preparations began. Our Foreman, Dylon, and his crew were assigned to complete the job. As soon as they arrived, they began preparing for the PolyLevel installation. The PolyLevel, a polyurethane foam injection solution, will be inserted underneath the entire sidewalk. The PolyLevel is installed by strategically inserting small holes throughout the slabs. Next, injection ports are inserted in those holes. Then, the polyurethane foam is injected underneath the concrete to fill the voids and raise the slab. Finally, the holes and control joints are sealed. Once the PolyLevel installation was complete, the crew shifted their focus to filling the many cracks. To fill these cracks, the crew used the NexusPro Sealant, a silicone-based sealant. To NexusPro solution, the crew drills, smooths, and prepares the crack with a non-absorbent backer rod filler. Then, the NexusPro is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. 

One of our homeowners from Hugo, MN, knew it was about time to sign up for their annual maintenance appointment. Not wanting to push it off any further, the homeowner reached out to our Appointment Center and signed up for their annual maintenance appointment. We sent one of our Service Technicians, Edgar, to perform the annual maintenance appointment. During his appointment, he found that all the products we installed were working correctly. However, Edgar noticed the homeowner's sidewalk was beginning to sink and some joints were flaking. Edgar let the homeowners know and suggested that the sidewalk be lifted and leveled. Knowing the great work we did in the past, the homeowner quickly agreed. The plans were sent to the assigned crew and production commenced. Our Foreman, Troy, and his crew arrived at the home and began by installing the PolyLevel underneath the sidewalk. The PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted in the prepared crack or control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the NexusPro installation was complete, the crew cleaned up their site and left the home. The homeowners were pleased with the job well done by the crew. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Lake Elmo, MN, began noticing an alarming sound in their home. Sick of hearing the noise, the homeowner searched for the source of the sound. Eventually, the homeowner found the noise was coming from the sump pump in their basement. Nervous that this could be a larger issue, the homeowner looked for a professional to inspect the status of their sump pump. After hearing many referrals, the homeowners decided to look into our company. Knowing we would be the best fit, the homeowner decided to sign up for their FREE estimate on our website. After finalizing the details, we sent Ryan, one of our Design Specialists, to investigate the sump pump. Ryan arrived at the home and completed a detailed inspection of the sump pump and the basement. Following his inspection, Ryan confirmed that the sump pump did need to be replaced. Ryan recommended that the homeowners install one of our reliable, high-quality sump pumps. The homeowners agreed with Ryan's suggestions and the installation preparations began. Our Foreman, Jesus, and his crew arrived at the home to begin the sump pump installation. The homeowners determined they wanted the TripleSafe sump pump installed. Our TripleSafe sump pump has three levels of protection, a cast-iron Zoeller 1/3 horsepower sump pump, and a second Zoeller 1/2 hp pump set a bit higher in case the first one fails. In case of power outages, our UltraSump battery backup, set at the highest level, will pump 11,500 gallons or more on a fully charged battery. To begin the project, the crew removes the old sump pump. Then, the TripleSafe is put into place and hooked into the water system. Next, the crew installed a buried discharge line outside the home. Finally, the crew cleans up their materials and leaves the home as nice as they arrived. The homeowner was grateful to know they have the best sump pump in their home. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Lakeland, MN, was walking into their garage when they tripped on the uneven sidewalk. Not wanting this to happen to anyone else, the homeowner looked for a solution. During their search, the homeowner came across our Facebook page and saw our impressive before and after posts. Once they saw that we do FREE estimates, the homeowners decided to call our Appointment Center and sign up. Once the details were set, the homeowners prepared for the arrival of Gary, one of our Design Specialists. As soon as he arrived, Gary began his inspection of the concrete. Gary determined that the sidewalk was sinking, causing the height differences. Since he knew the root of the issue, Gary suggested that leveling and lifting the concrete would solve the sinking. The homeowners knew this would be their best plan of action, and they agreed with Gary's suggestions. The plans were then sent to the assigned crew and production commenced. Our Foreman, Patrick, and his crew traveled to the home and began the PolyLevel, a polyurethane foam injection solution, installation. First, the crew installed PolyLevel underneath the stairs and the sinking sidewalk. The PolyLevel restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to replacing the joints. The crew utilized NexusPro Sealant, a silicone-based sealant for joints and cracks formulated to provide long-lasting flexibility and withstand harsh weather conditions. The crew begins by drilling, smoothing, and preparing the non-absorbent backer rod filler. Then, the NexusPro sealant is inserted into the prepared control joint. Finally, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the NexusPro installation was complete, the crew cleaned up their site and left the home. The homeowners were impressed that their sidewalk was saved without being replaced. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Saint Paul Park, MN, noticed their sidewalk was very uneven. Not liking the look, the homeowner wanted to have the sidewalk repaired. The homeowner was unsure who to work with, so they asked their family and friends for recommendations. Many of their friends and family recommended us to them, so they decided to look further into our services. After seeing our impressive services, the homeowner decided to call our Appointment Center and sign up for their FREE estimate. Once the appointment details were settled, we sent out one of our Design Specialists, Gary. When he arrived, Gary determined that the concrete was sinking and was causing all these issues. Furthermore, Gary offered a solution that would solve their sinking issues. The homeowners agreed and the plans were ready to be sent to the assigned crew. After receiving the plans, the crew traveled to the home to begin the repair process. To begin the project, the crew began lifting and leveling the sidewalk and driveway using the PolyLevel, a polyurethane foam injection solution. The crew begins by strategically drilling small holes throughout the concrete and sidewalk. Next, injection ports are inserted throughout the small holes. Then, the polyurethane foam solution is injected underneath the affected concrete. Finally, the holes are covered and smoothed to give it a finished appearance. As soon as the PolyLevel installation was complete, the crew shifted to fixing all the cracks and joints throughout the concrete. To fill these cracks and joints, the crew used the NexusPro Solution, a silicone-based sealant for joints and cracks that is specially formulated to provide long-lasting flexibility and can stand up to harsh weather. The crew installs the NexusPro by inserting the sealant into the prepared crack or control joint. Then, the cracks are detailed with a thin layer of native sand, giving the concrete a uniform, finished appearance. Once the crew finished the crack and joint repair, they cleaned up the job site and moved on to the next job. The homeowner was glad to know they did not need to replace their concrete and it was saved. If you are experiencing a similar issue, sign up for your FREE estimate today! 

A homeowner in Scandia, MN, noticed that their garage apron and driveway were beginning to overlap one another. The homeowners knew they had many options, but they wanted to avoid replacing concrete. During their hunt for the concrete repair, the homeowner came across one of our lifting and leveling demonstrations. Impressed by our demonstrations, the homeowner decided to sign up for their FREE estimate. After the appointment was set, we sent one of our Design Specialists to perform the estimate. When the Design Specialist arrived at the home, they introduced themselves to the homeowner and then began the concrete evaluation. Once they were complete, the Design Specialist discovered the concrete was sinking due to soil settlement. Knowing they did not want to replace the concrete, the Design Specialist suggested that the homeowner lift and level the concrete with our PolyLevel. After considering their options, the homeowner agreed with the Design Specialist's suggestions and production began. Our Formen, Dylon, and his crew traveled to the home to begin the PolyLevel installation. PolyLevel is a polyurethane foam injection solution that restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel injection was finished, the crew shifted their focus to filling the cracks and replacing the joints. After the PolyLevel was inserted, the crew could clean up their materials and leave. Once the job was complete, the homeowner investigated the work and was impressed. If your concrete is sinking, sign up for your FREE estimate today!