American Waterworks Before & After Photos

A homeowner in St. Paul, MN, had grown concerned when they noticed their walkway and driveway had become bumpy due to slab settlement. Knowing they needed expert advice, the homeowner decided to contact our Appointment Center to schedule their FREE inspection. 

In less than a week, our Design Specialist, Nicola G., arrived at the home to conduct a thorough assessment of the concrete. During the inspection, Nicola talked with the homeowners about their areas of concern and worked with them to fix the issue. Nicola ended up recommending lifting and leveling the concrete slabs using PolyLevel, our foam-expanding solution, and repairing the cracks and sealing the joints along the driveway using NexusPro, our silicone-based sealant. Not wanting to go through the troubles of mudjacking, the homeowner happily agreed to Nicola's recommendations.

In about a month, our Foreman, Bryce P., and his crew arrived at the home to carry out the installation. Once the slabs had all been lifted and leveled, the cracks were repaired and the joints were sealed.

Now, our customer can have peace of mind with their smooth and level driveway and walkway! Experiencing sinking concrete? Click HERE to schedule your FREE estimate today!

A homeowner in Roseville, MN, had noticed their driveway had become bumpy due to their concrete slabs sinking. Knowing the issue would worsen and lead to more bumps and cracks, the homeowner contacted us and scheduled their FREE estimate. 

In less than a week, one of our Design Specialists arrived at the home for the inspection. During the inspection, our Design Specialist took a close look at the concrete slab and identified which slabs need lifting to remove the bumps along the driveway. After reporting his findings to the homeowner, our Design Specialist recommended lifting the concrete slabs with PolyLevel, and sealing the joints and repairing the cracks with NexusPro. Confident with the recommendations, the homeowner decided to move forward with the project.

In about a month, our Foreman, Troy J., and his crew arrived at the home for the installation. After everything was successfully installed, the crew cleaned up their equipment and left the home.

Now, our customer can have a smooth driveway! Looking for driveway repair? Schedule your FREE estimate today by clicking HERE!

In Saint Paul, MN, a homeowner had an extremely damaged concrete driveway that was a trip hazard and bumpy to drive over. Tired of this issue, the homeowner began looking into driveway repair in the area and found us. Impressed by our concrete repair photos, the homeowner contacted us to schedule their FREE estimate.

In less than a week, our Design Specialist, Romeo V., arrived at the home to provide a thorough inspection of the concrete slabs. During the inspection, he took measurements to see how far the slabs had sunken and determined which needed lifting. Romeo also explained to the homeowner that soil compaction and settling are one of the common causes of sinking concrete slabs. As the season changes, the soil beneath the concrete expands and contracts. Over time, as the environment continues to change and heavy objects like cars drive over the slabs, the soil will compact and settle. With it, the slabs would sink, causing cracks to form. To effectively fix this issue, Romeo recommended lifting the uneven slabs with PolyLevel, our foam expanding solution designed to lift sunken slabs back to their original position, and NexusPro, our silicone-based sealant to repair the cracks and seal the joints. Confident in our team, the homeowner decided to move forward with the recommendations.

In about a month, our Foreman, Dylon V., and his crew arrived at the home for the installation. Once the slabs had been lifted and leveled so they were no longer a trip hazard, the crew repaired the cracks and sealed the joints.

Now, our customer can have peace of mind! Experiencing an uneven driveway? Schedule your FREE estimate today by clicking HERE!

In Saint Paul, MN, a homeowner had grown concerned over the concrete slabs around their home as it had begun sinking, causing the area to become uneven. Knowing the issue would continue without the right solution and lead to trip hazards, the homeowner contacted us to schedule their FREE estimate.

In less than a week, our Design Specialist, Kyle P., arrived at the home for the inspection. During the inspection, Kyle took a close look at the concrete slabs, measuring how far they had sunken and which needed to be lifted. After reporting his findings to the homeowner, Kyle highlighted the importance of early action as the issue would only continue to get worse, negatively impacting the curb appeal of the home and creating more trip hazards. To repair the concrete, Kyle recommended installing PolyLevel, our polyfoam solution designed to lift uneven slabs, and NexusPro, our silicone-based sealant to seal the joints. Confident in our team, the homeowner decided to move forward with the project.

In about a month, our Foreman, Jordan S., and his crew arrived at the home for the installation. Once the crew successfully lifted and leveled the uneven slabs, they sealed off the joints.

Now, our customer can have a smooth walkway! Experiencing sinking concrete? Schedule your FREE estimate today by clicking HERE!

A homeowner in St. Paul, MN, noticed water leaking from their basement. Unsure of the cause, the homeonwer knew they needed to find an expert to provide them with a solution. One of the first companies to grab their attention was us, American Waterworks, so the homeowner decided to take a closer look. After seeing our impressive lineup of waterproofing products, the homeowner knew we were the ideal choice for their project. The homeowner called our Appointment Center and scheduled a FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist. The Design Specialist promptly arrived at the home and began the thorough inspection of the basement. During the inspection, the Design Specialist noted that several areas were suffering from water damage. To prevent the issue from continuing, the Design Specialist recommended waterproofing the entire basement. Knowing this was the best plan of action, the homeowner agreed and worked with the Design Specialist to find the best installation date. When the installation date arrived, the homeowner prepared for the arrival of our Design Specialist, Raul. A few days later, Raul and his crew traveled to the home to begin the installation. First, the crew started by installing WaterGuard along the basement perimeter. Then, the crew shifted to securing CleanSpace to the unfinished basement walls. As soon as all the products were secured, the crew cleaned up their materials and left the home. The homeowner was grateful to know their basement was properly waterproofed. If you are experiencing water intrusion issues, sign up for your FREE estimate today!