American Waterworks Before & After Photos

A homeowner from Mahtomedi, MN, noticed that his concrete walkway was showing signs of sinking. His front walkway had almost completely separated from the foundation of his home and had created a trip hazard. Not wanting to compromise safety any longer, he decided to take action. After receiving one of our printed ads in the mail, he decided to set up his FREE estimate, and a few weeks later, our Design Specialist, Gary S, headed out to the home. 

Once Gary finished his inspection, he informed the homeowner that we could address the sinking concrete with the help of our PolyLevel method. PolyLevel is a dense, polyurethane foam that expands when it's injected beneath sinking concrete slabs. It works to fill voids left over by soil erosion and slowly lifts the slabs back into place. He went on to say that our lifts are completed with the installation of our NexusPro. This silicone-based sealant, NexusPro gets applied to all the cracks and joints in the sinking concrete and works to prevent water or debris from getting below the slab. The homeowner liked the sound of Gary's solution and decided to schedule his installation for a few weeks later. 

On the day of the installation, our Foreman, Sam K, and his team completed the lift and seal with no complications. Now our customer can enjoy his tree-free concrete! 

Do you have an area of concrete that's creating a trip hazard? Click HERE for your FREE estimate! 

A homeowner from Buffalo, MN, was facing a problem with his concrete driveway. Over the years, many slabs within the driveway had begun to sink. Some had sunken so badly that it had led to cracks in the concrete. The homeowner was tired of looking at his unsightly driveway, so he decided to take action to correct the issue. The homeowner knew that American Waterworks handled concrete repair in MN so he signed up for his FREE estimate and waited for his appointment date to roll around. 

On the day of the estimate, our Design Specialist, Gary S, took his time evaluating the driveway and any connecting concrete. When he finished, he met with the homeowner. He started by saying that concrete can sink and crack for a variety of reasons, but nonetheless, American Waterworks could fix the issue with our PolyLevel injection. Gary explained that PolyLevel is a dense polyurethane foam that expands when it's injected beneath concrete surfaces. It works to fill voids left by soil erosion, slowly lifting the concrete back into place in the process. The homeowner agreed with Gary's recommendations and scheduled the job on the spot. 

On the day of the installation, our Foreman, Sam K, led his team through a flawless lift and level. Now, our customer can put her uneven driveway worries to rest! 

A homeowner in Byron, MN contacted American Waterworks after noticing their cement pad in front their 3 stall garage needed to be lifted about 2.5 to 3 inches.

A homeowner in Byron, MN, was cleaning their basement when they discovered the bottom panels of their walls were damp. Concerned by this discovery, the homeowner wanted to find a solution fast! The homeowner did an online search and came across our website. Impressed by the many services we offer, the homeowner knew we would have a solution for them. The homeowner signed up for their FREE estimate online and prepared for the arrival of Darin, one of our Design Specialists. Once Darin arrived, the homeowner explained their issue and he began inspecting the basement. Darin completed the estimate and determined that the basement needed to be fully waterproofed. After explaining what was happening in their home, Darin recommended installing the WaterGuard around the basement perimeter. The homeowner agreed with Darin's recommendations, so production plans were sent to the assigned crew. Our Foreman, Kiko, and his crew made their way out to the home to complete the project. Kiko and his crew began by prepping the basement for production. Once the basement was ready, the crew installed the WaterGuard around the entire perimeter. Additionally, the crew dug a feedline so it ties into their current sump system. After the WaterGuard was placed and covered, the crew put the basement back together. The homeowner was delighted to know their basement was properly waterproofed. American Waterworks is glad to provide another homeowner peace of mind. 

A homeowner in Byron, MN, had noticed that the concrete slabs along the back of their home had begun sinking. causing the area to become uneven. Knowing the issue would continue to worsen, the homeowner began searching for concrete lifting in Byron, MN, and found us. The homeowner then contacted our Customer Support Center to schedule their FREE concrete estimate. 

In less than a week, our Design Specialist, Mitch S., arrived at the home to assess the concrete. During the inspection, he noticed signs of soil washout causing the slab to sink. To fix this issue, Mitch recommended lifting the concrete slabs using PolyLevel. The homeowner happily agreed to Mitch's recommendations and scheduled the installation date.

In a couple of weeks, one of our crew will arrive at the home for the installation. The crew began by precisely drilling small holes into the slabs before injecting PolyLevel. Once the slabs have been lifted to the desired height, the crew seals the holes.

Now, our customer can have a level concrete! Experiencing sunken concrete? Click HERE to schedule your FREE estimate today!