American Waterworks Before & After Photos

A homeowner in Moorhead, MN recently learned of the dangerous health risks with radon. He learned that radon is a by-product of uranium, a naturally occurring radioactive element which can be found in soil. Concerned that his family was unknowingly breathing in the toxic fumes, the homeowner decided to use a radon testing kit. After a couple of days the results were over 4 pCi/L and the homeowner contacted us to schedule his FREE estimate.

In a couple of weeks, our Design Specialist, James N., arrived at the home to provide a thorough inspection, answer any questions, and provide the best solution for the homeowner. During the inspection, James explained to the homeowner that it was good that he tested his home for radon as we cannot smell, taste, hear, see, or touch it. James then created a design to where our radon mitigation system would be installed. After looking at the proposal, the homeowner happily agreed and scheduled the installation date.

In a couple of weeks, our Radon Sales & Service Technician, Jackson P., and his crew arrived at the home for the installation. They began the installation by installing a PVC pipe into the footing of the home. The pipe is then connected to the radon mitigation system which is installed outside of the home. Once the crew was done with the installation and they ensured everything was working properly, they cleaned up their equipment and left the home.

Now, our customer and his family can breathe in fresh clean air! When was the last time you tested the radon levels of your home? Schedule your FREE estimate today by clicking HERE!

A homeowner in Cyrus, MN, noticed that his driveway had developed cracks and become uneven. Concerned that it would worsen and become a tripping hazard, he searched for concrete services in the area. He came upon our website, was impressed with our job stories, and decided to contact us to schedule his FREE estimate.

In a couple of weeks, our Design Specialist, Tony B., arrived at the home to assess the driveway. Tony explained to the homeowner that one of the common reasons for sinking and cracked concrete is soil washout. As it rains and floods, the water moves through the ground underneath the concrete, and it can wash away the supporting soil holding up the slab. For this reason, Tony recommended our PolyLevel, to lift the concrete so that the driveway would be even. The homeowner happily agreed with his plans, and Tony's design was sent to our Foreman, Charlie C.

In about two weeks, Charlie and his crew arrived at the home for the installation. They began by drilling small holes into the slab and injection ports and installed them. Then, PolyLevel is injected underneath the slab and expands in the space between the slab and the soil. Once the concrete has been lifted, the crew ensures that it is fully leveled before sealing the holes with concrete. Once the crew was done, they cleaned up their equipment and left the home. 

Now, our customer can have peace of mind knowing his driveway is smooth and even! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Northwood, ND had his foundation support posts replaced with our SmartJacks. Our SmartJacks can support loads up to 60,000 pounds, they are galvanized, they can be installed in limited-access areas, and they are the only support post system that can address problematic soils. The homeowner was very happy with the work and was thrilled to see that their floors were no longer sagging inward. 

At American Waterworks, we provide FREE estimates for sagging floors, settlement, cracked foundations, bowing walls, deterioration, and more! Give us a call or click here to request and schedule your FREE inspection. 

A homeowner in Northwood, ND, was concerned once they noticed their basement ceiling was sagging. Concerned this could been damaging, the homeowner knew they needed to find a permanent solution. Unsure who to work with, the homeowner asked their friends and family for any recommendations. One of their friends recommended working with us, American Waterworks. The homeowner decided to take a closer look at the services we provide and was impressed with our previous projects. Since they were already on our website, the homeowner signed up for their FREE estimate. Once the estimate was set, the homeowner awaited the arrival of James, one of our Design Specialists. James arrived at the home and began the detailed inspection of the basement. While investigating, James discovered the floors needed to be permanently stabilized with SmartJacks. James completed the inspection and presented his proposal to the homeowner. After hearing James' proposal, the homeowner knew this was the best option for their home. Once the plans were approved by the homeowner, it was sent to our office to be approved. After receiving the final stamp of approval, the proposal was sent to our Foreman, Roel, and his crew. Roel and his crew traveled to the home to begin the installation. First, the crew ensured the home was ready for the SmartJack installation. The crew installed two SmartJacks along the struggling wall. Once the SmartJacks were installed, the crew cleaned up their materials and left the home. The homeowner was relieved to know their home was properly stabilized. American Waterworks is happy to provide its homeowners peace of mind knowing their basement was properly stabilized. 

A homeowner was in their basement when they discovered water damage and immediately panicked. Knowing the winter months were approaching, the homeowners wanted to get ahead of any further damage. While comparing different basement waterproofing services, the homeowner determined American Waterworks was the best fit. The homeowner signed up for their FREE estimate with Design Specialist, Ian, and the waterproofing began. Ian suggested that WaterGuard be installed around the perimeter of the leaking room, then CleanSpace be placed on the walls, and finally, a new sump pump be installed. After presenting the plan, the homeowners agreed and the project began. Before the job, the homeowner was asked to remove the shelves around the construction area. Our crew drove out to the property and started by creating channels around the full perimeter of the home. Next, the crew removed the old sump pump system and installed the SuperSump+ in the home. Then the crew installed the CleanSpace System on top of the exposed wall. The crew completed the full waterproofing of the basement. The homeowner was thankful their basement was saved and American Waterwork was pleased to help another customer.