Concrete Leveling Before & After Photos

A homeowner in Minneapolis, MN, had noticed the concrete on their back patio had become bumpy and uneven. Unsure of the cause, the homeowner decided to seek expert advice and contacted us to schedule their FREE concrete estimate. 

In less than a week, our Design Specialist, Dave S., arrived at the home to conduct a thorough inspection of the concrete. During the inspection, Dave noticed multiple cracks that had formed and a few trip hazards. After reporting the findings to the homeowner, Dave created a proposal tailored to the homeowner's issue and budget. In that proposal, Dave recommended lifting the slabs with PolyLevel, our elite foam expanding solution, and NexusPro, our silicone-based sealant, to repair the cracks and seal the joints. The homeowner happily agreed and decided to move forward with the project.

In a couple of weeks, our Foreman, Bryce P., and his crew arrived at the home for the installation. After successfully lifting the concrete slabs and sealing the joints and cracks, the crew cleaned up their equipment and left the home.

Now, our customer can have a smooth and level patio! In need of concrete repair? Click HERE to schedule your FREE estimate today!

A customer from Minneapolis, MN got in contact with us when he began to notice that his front walkway was sinking away from his front steps, creating a tripping hazard and pooling water. He was afraid that if he left the issue unresolved, he would risk worsening the hazard. When he called in we set him up with our FREE estimate. Once his appointment was scheduled, we sent our Design Specialist, Mike, out to the property to see what could be done. Once he had completed his inspection, he recommended that our customer think of using our PolyLevel solution to lift the walkway. Mike explained that our PolyLevel is an expanding polyurethane foam that is injected beneath the concrete to fill the gaps caused by soil erosion and raise and stabilize the concrete surface. Our customer agreed and work began shortly after. 

Our Foreman, Ben, and his Co-Foreman, Jake, began the process of lifting the walkway by strategically drilling holes into the problem slab. Next, they injected the foam into the holes, making sure to pay close attention to the lifting process to avoid overcorrecting. Once the process was done, our customer was happy to know that he didn't need to work about tripping hazards in front of his home anymore! 

A homeowner in Brainerd, MN, noticed the steps leading to their dock were uneven. Worried someone could be seriously injured, the homeowner knew they needed to find a permanent solution. The homeowner looked into "concrete leveling services near me". One of the first companies to capture their attention was American Waterworks, so the homeowner decided to sign up for a FREE estimate. Once the estimate was set, we sent one of our Design Specialists, Gary, to the home to take a closer look. Gary promptly arrived and began the detailed inspection of the stairs. During his inspection, Gary confirmed that several stairs needed to be lifted back into place. To prevent this issue from worsening, Gary recommended lifting and leveling the stairs, and the homeowner agreed. Gary worked with the homeowner to find the best installation date. Once the installation date arrived, our Foreman, Charlie, and his crew traveled to the home to begin the installation. First, Charlie and his crew started by lifting the stairs with PolyLevel, a polyurthane foam injection solution. Once all the steps were raised, Charlie and his crew cleaned up their materials and left the home. The homeowner was delighted with the excellent work completed by the crew. American Waterworks is happy to provide its homeowners with peace of mind knowing their steps are properly raised. 

In Brainerd, Minnesota a homeowner was watching his concrete walkway slowly pull away from his home. Worried that the concrete could sink further, and cause even more damage, he began to look into Minnesota concrete lifting. Through the recommendation of a friend, he called American Waterworks and booked his FREE estimate. Several weeks later, our Design Specialist, Greg G, was headed to the home to evaluate the issue. 

When Greg arrived he began his inspection, paying close attention to areas of concern the homeowner had pointed out. When he concluded, he and the homeowner sat down to discuss his findings. To begin, Greg informed the homeowner that concrete can shift and sink for a variety of reasons such as excess water causing soil washout, extreme heat drying the soil out, or poor soil compaction when the home was built and concrete was laid. He went on to say that American Waterworks could address the concrete sink with our PolyLevel injection. PolyLevel is a polyurethane foam that expands when it's injected beneath sunken concrete patios, sidewalks, driveways, and more. As the foam expands it pushes the concrete above back into place, restoring the look and value of your home without the mess and hassle of full replacement. Greg went on to say that, as added protection, he was recommending our NexusPro. This silicone-based sealant gets applied to the cracks and joints in the concrete once the lift is completed. It's specially designed to provide long-lasting flexibility and to stand up against harsh weather conditions. This means a single application of nexus pro sealant can protect is from the damage caused by soil and compaction and washout. The homeowner was thrilled to know he did not need to replace the concrete around his home, and signed up for the project on the spot. 

About a month later, our Foreman, Bryce P, and his Co-Foreman were at the property lifting the problem slabs. When they had finished, our customer was pleased to know he no longer had to worry about uneven concrete dragging down home value! 

If you have uneven concrete of any kind, addressing it now could save you time and money down the road! Click HERE to see if PolyLevel is the right solution for you!

A homeowner in Champlin, MN, noticed several sections of their concrete driveway were overlapping one another. Wanting to solve the issue while the weather is pleasant, the homeowner began searching for a solution. During their search, the homeowner came across our 5-star reviews and wanted to give us a try. The homeowner visited our website and signed up for their FREE estimate. Once the estimate details were settled, we sent one of our Design Specialists, Kyle, to investigate the driveway.  following his investigation, Kyle determined the concrete slab was beginning to sink. Kyle recommended a solution that would solve the sinking concerns and repair the several cracks throughout the driveway. After considering all their options, the homeowner decided to go with Kyle's solution. Once the solution was approved, Kyle directed the solution to the assigned crew. Our Foreman, Dylon, and his crew arrived at the home and began production right away.  First, the crew injected the PolyLevel, a polyurethane foam injection solution, underneath the back patio and concrete driveway. After the PolyLevel was installed, the crew shifted their focus to repairing the cracks and joints throughout the concrete. To fill these cracks, the crew utilized the NexusPro Sealant, a silicone-based sealant for joints and cracks. Once the cracks and joints were repaired, the crew could clean up their site and leave the home. The homeowners were happy to know that their driveway was properly repaired. American Waterworks is happy to work with another lovely customer.