Concrete Leveling Before & After Photos

An Eau Claire, WI, homeowner was preparing his home for its eventual sale. Part of his "to-do" checklist was correcting his uneven driveway. Several of the slabs had sunken over the years, creating trip hazards. He knew that uneven concrete could lower the resale value of the home, so he decided to search for a MN concrete repair company. Eventually, he found our website and claimed his FREE estimate, and several weeks later, our Design Specialist headed out to the home. 

Upon completion of his inspection, our Design Specialist met with the homeowner to deliver his recommendations. He informed the homeowner that we could address the issue using our PolyLevel. PolyLevel is a polyurethane foam that expands when it's injected below uneven concrete slabs. It works to fill the voids left by soil erosion, and in the process, it slowly lifts the uneven slabs back to their desired location. Our Design Specialist was also recommending our NexusPro sealant. This silicone-based product gets installed after the lift is completed, and gets applied to the cracks and joints in the concrete to prevent water from penetrating the slab and getting to the vulnerable soil below. The homeowner liked the non-invasive plan and scheduled the lift to be completed several weeks later. 

On the day of the project, our Foreman, Sam, and his team completed the lift and level with no complications. Now, our customer can confidently resell his home knowing his driveway is in tip-top shape! 

Do you have dips and cracks in your driveway? Click HERE for your FREE estimate! 

A homeowner in Eau Claire, WI, was concerned about his sunken concrete slabs, as they caused his driveway to be bumpy and unflattering. Knowing that the issue would only worsen, the homeowner began searching for "concrete lifting in Eau Claire, WI" and found us. After looking through our website and becoming impressed by our reviews, the homeowner did not hesitate to contact us for his FREE estimate. 

In about a week, our Design Specialist, Kyle P., arrived at the home for the inspection. During the inspection, Kyle explained to the homeowner that soil compaction is one of the most common causes of sinking concrete slabs. Soil compaction is the process in which the soil compresses down due to the surface exceeding its weight-bearing capacity. Luckily, we have just the right solution that is non-invasive and does not require total slab replacement, PolyLevel. PolyLevel is our foam-expanding solution that accurately lifts sunken slabs. Alongside PolyLevel, Kyle also recommended NexusPro, our silicone-based sealant specifically engineered for joints and cracks. After reviewing Kyle's proposal, the homeowner happily agreed to his suggestions and decided to move forward with the project.

In about a month, our Foreman, Ryan T., and his crew arrived at the home for the installation. The crew began the project by drilling small holes into the slabs. PolyLevel is then injected beneath, filling in the empty spaces in the soil. Once the concrete slabs have been lifted to the desired level, the crew seals the holes. Lastly, they used NexusPro to seal the joints and repair the cracks along the driveway. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer has a smooth and crack-free driveway! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!

A homeowner in Eau Claire, WI, was concerned when she noticed the slabs along her walkway had begun sinking, causing a bump to form in the area. Worried it was a possible trip hazard, the homeowner began searching for concrete fixers in Eau Claire, WI, and found us. After browsing our website, the homeowner grew impressed by our before and after transformations and decided to contact us to schedule her FREE estimate. 

In about a week, our Design Specialist, Canon T., arrived at the home to conduct a thorough inspection of the areas of concern. During the inspection, Canon explained to the homeowner that one of the likely reasons the slabs have begun sinking is due to the process of soil washout. Soil washout is when water moves through the ground and washes away supporting soils, keeping the slabs upright. For this reason, Canon recommended PolyLevel to lift the concrete slabs back to their original position. The homeowner happily agreed to Canon's recommendations, and his design was sent to our Foreman to carry out the installation. 

In about a month, our Foreman, Sam K., and his crew arrived at the home for the installation. The crew began by drilling small holes into the slabs and inserting the injection ports. PolyLevel is then injected beneath the slab, expanding and filling the voids in the soil, causing the slab to lift. Once the slab has been lifted, the crew seals the holes. After they're done with the installation, the crew cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing her concrete issues have been properly addressed! Noticed sunken concrete on your property? Click HERE to schedule your FREE estimate today!

A homeowner in Eau Claire, WI, noticed their front steps had sunken dramatically. Concerned this would become a serious issue, the homeowner knew they needed to find a permanent solution. Knowing they couldn't repair the issue themselves, the homeowner began looking into "sunken step repair near me". After comparing several companies, only one stood above the rest, American Waterworks. Impressed with our stellar ratings and reviews, the homeowner knew we were the ideal company for their project. Since they were already on the website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Romeo. A few days later, Romeo traveled to Eau Claire to begin the detailed inspection. During the inspection, Romeo discovered the step was sinking due to settlement. Romeo recommended lifting the step with PolyLevel, our polyurethane foam injection solution. After hearing the benefits of PolyLevel, the homeowner knew Romeo's solution would be their best bet. Once they earned the homeowner's stamp of approval, the plans were passed along to our Logistics team to finalize and schedule the project. Our Logistics team scheduled the project for a few weeks later. Once the project date arrived, our Foreman, Dylon, and his crew traveled to the home to begin the installation. After they arrived, Dylon and his crew started by lifting the step back to its original position. Next, the crew replaced the damaged joints with NexusPro, a silicone-based solution. Once all the products were secured, the crew cleaned up their materials and left the home. The homeowner was delighted with the jaw-dropping results done by the crew. American Waterworks is delighted to assist its homeowners in repairing their damaged sidewalks. 

A homeowner in Eau Claire, WI, noticed that her stairs had begun sinking on one side, causing them to tilt slightly. Knowing the issue would only continue to worsen and has become a trip hazard, the homeowner took action by searching for "concrete lifting services in Eau Claire, WI" and found multiple contractors. After looking at everyone's website, the homeowner knew we were the best choice based on our reputation, reviews, and before-and-after photos. The homeowner then contacted our Appointment Center and scheduled her FREE estimate. 

In about a week, one of our Design Specialists arrived at the home for the inspection. During the inspection, our Design Specialist explained to the homeowner that one of the most common causes of sinking concrete is soil washout. Soil washout is the process in which water moves through the ground and washes away the supporting soils that keep the concrete upright. Luckily, we have just the right solution, PolyLevel, our waterproof foam expanding formula that accurately lifts sinking slabs, and NexusPro, our silicone-based sealant that is specifically engineered for cracks and joints. After looking over our Design Specialist's proposal, the homeowner happily agreed to his suggestions and decided to move forward with the project.

In a couple of months, our Foreman, Jordan S., and his crew arrived at the home to lift the stairs. The crew began by drilling small holes into the steps. PolyLevel is then injected beneath it, filling in the voids in the soil and causing the stair to lift. Once the stair has been lifted so that it is level, the crew seals the holes. Lastly, they used NexusPro along the joints of the steps. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have peace of mind knowing his stairs are leveled and no longer a trip hazard! Are you experiencing something similar? Click HERE to schedule your FREE estimate today!