American Waterworks Before & After Photos

A homeowner in Rushford, MN, called us with concerns that their concrete apron to the garage and sidewalk adjacent to the garage needed to be leveled due to water seepage. Unsure who to work with, the homeowner concrete leveling company near Rushford, MN. One of the first companies to grab their attention was us, American Waterworks, so the homeowner decided to sign up for their FREE estimate. Once the estimate details were set, the homeowner prepared for the arrival of the Design Specialist. Once the Design Specialist arrived, they began the thorough inspection of the concrete. After they wrapped up the inspection, the Design Specialist confirmed the apron and sidewalk needed to be lifted with PolyLevel, a polyurthane foam injection solution. Knowing this was the best plan of action, the homeowner agreed and worked with the Design Specialist to find the best installation date. When the installation date arrived, our crew traveled to the home to begin the installation. First, the crew secured PolyLevel below the sinking slabs. Once the PolyLevel was secured, the crew shifted to repairing the cracks and joints with NexusPro, a silicone-based solution. After all the products were secured, the crew cleaned up their matierals and left the home. The homeowner was delighted with the excellent work completed by the crew. If you notice you are suffering from a simliar issue, sign up for your FREE estimate today! 

A homeowner from Rushford, MN, was growing frustrated with the concrete patio in front of his home. He used it for extra storage for outdoor materials, but getting those items in and out of the area was difficult because of a few areas of uneven concrete. One night, while watching the local news, the homeowner saw an American Waterworks ad for concrete lifting. He decided to give us a call and set up his FREE estimate. A few weeks later, our Design Specialist, Romeo, headed out of the property. 

Once his inspection was complete, he met with the homeowners to give him his recommendations. He stated that we could fix the areas of sinking concrete by using our PolyLevel method. PolyLevel is a polyurethane foam that expands when it's injected below concrete slabs. As this PolyLevel expands, it fills voids caused by soil erosion and slowly lifts the concrete slabs back to their original position. He then said that we finish our lifting and leveling process by installing our NexusPro, a silicone-based sealant that gets applied to the joints and cracks in the concrete to prevent moisture from getting below the slab, causing further soil washout. The homeowner agreed and the work was scheduled for a few weeks later. 

On the day of the project, our Foreman, Jordan S, headed out to the property to complete the lift. Jordan ran into weather concerns, so the NexusPro had to be installed a few weeks later. Once the job had been completed, our homeowner was thrilled to know that he could use his outdoor space without hassle! 

Are you dealing with sinking concrete? Click HERE to claim your FREE ESTIMATE! 

In Hinckley, MN, a homeowner learned that radon is the second leading cause of lung cancer in the US and that it can be found in any household. Concerned their family was breathing in the toxic gas, the homeowner purchased a radon testing kit and tested the levels in their home. In a couple of days, the test results were above 4pCi/L, and the homeowner contacted our Appointment Center for a solution.

In less than a week, our Design Specialist, Gary S., arrived at the home to conduct a thorough inspection. During the inspection, Gary took a close look at the layout of the home and worked closely with the homeowner on the best placement of our radon mitigation system. Gary recommended installing the fan in the exterior of the home and connecting it to the concrete floor in the basement with PVC piping. Confident in our team, the homeowner knew the job would be done right and chose to move forward with the project.

In about a month, our Foreman, Gus R., and his crew arrived at the home for the installation. Once everything was successfully installed, the crew cleaned up their equipment and left the home.

Now, our customer can have peace of mind! Experiencing high radon levels? Schedule your FREE estimate today by clicking HERE!

A homeowner in Elmwood, WI was tired of dealing with the large bump that had formed between the garage floor and the driveway apron. Every day when he drove in and out his car ran over the bump, and it had only gotten worse over time. He was curious about what it would take to replace or repair the concrete, so he went online to see what his options were. The American Waterworks website stood out to him because of our powerful PolyLevel foam that is able to lift up concrete back to its original height. He decided to sign up for one of our FREE no-obligation estimates to learn more from an expert. We sent over our Design Specialist, Mac Cole, to the home to inspect the concrete and talk with the homeowner about his expectations. Mac explained that PolyLevel was indeed a great solution for the homeowner's situation and that this method of concrete repairing was a lot less invasive and expensive than other methods. The homeowner was glad to hear this and scheduled a time for the installation. Our Foreman, Patrick Burnes, and his crew went to the site to install the PolyLevel and also our NexusPro joint sealant for a smooth finish. The homeowner was glad he had got in touch with us to carry out the concrete repairs.

Curious about our PolyLevel for your own concrete? Give us a call to receive your FREE estimate and learn more!

Sam in Arkansaw, WI had three cracked and bowing walls in his basement. He was concerned about the pressure this was putting on his foundation, and he wanted to have his walls repaired before the problem got any worse. After visiting a local home show and talking with one of our Design Specialists, he decided to have us inspect his foundation and provide him with a FREE estimate. Our Specialist recommended that we install wall anchors on two of the walls and PowerBraces on the other. Sam agreed that this was the best solution for him, so he scheduled the installation.

Our production crew installed the wall anchors by drilling small holes through the block foundation into the soil surrounding the home. Then, they dug small holes in the yard that lined up with the anchor rods, and they secured them from the outside and inside of the home with anchor plates. They tightened them as far as they would go to permanently stabilize the wall. Next, they installed the PowerBraces, which are strong steel I-beams that are secured by brackets that are drilled into the floor and the rim joists. These two foundation repair products not only permanently stabilized Sam’s foundation, but they also provide the potential for his walls to straighten back to their original position.

Interested in learning more about our foundation repair products? Click here!