Concrete Leveling Before & After Photos

A La Crosse, WI, homeowner was growing tired of a piece of uneven concrete in the walkway in front of his home. Each time he walked over the cracked concrete, he took a tumble as it was protruding. He began to look for contractors offering concrete repair in WI. When he found our website, he signed up for his FREE estimate, and several weeks later, Ross J headed out to the home. 

Ross got right to work assessing the concrete. When he finished, he informed the homeowner that we could address the issue using our PolyLevel injection. This product is a polyurethane foam that expands as it's injected beneath sunken concrete. It works to fill voids left by soil erosion, slowly lifting the concrete back to its original resting place in the process. Ross went on to say that, as an extra measure of protection, he was recommending our NexusPro. This silicone-based sealant is applied to all the cracks and joints of the newly lifted concrete. It works to prevent unwanted moisture from getting below the concrete to the vulnerable soil below. The homeowner agreed with Ross's plan, and scheduled the job on the spot. 

On the day of the project, our Foreman, Sam K, and his team were able to lift, level, and seal the concrete with no issues. Now, our customer can enjoy his home without worries of uneven concrete! 

A homeowner in La Crosse, WI, noticed their sidewalk was quite uneven. Worried this could become a tripping hazard, the homeowner knew they needed to find a permanent solution. Knowing they could not repair it themselves, the homeowner began looking into “concrete leveling near me”. At the top of the list was American Waterworks, so the homeowner decided to take a closer look at our concrete lifting and leveling services. Impressed with our award-winning products, the homeowner decided to sign up for their FREE estimate.  Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, Will.  After Will arrived, he began his thorough inspection of the home. During his inspection, Will confirmed the sidewalk was suffering from settlement. To prevent the settlement from continuing, Will recommended installing PolyLevel underneath the struggling sidewalk. After hearing Will’s recommendations, the homeowner decided to go ahead with the proposal. Next, Will sent the proposal to our Logistics team to build and schedule the project. Once the project details were finalized, the plans were sent to our Foreman, Dylon, to begin the project. A few weeks later, Dylon and his crew traveled to the home to begin the installation. First, Dylon began by lifting the sidewalk back to its original position. The crew utilized PolyLevel, a polyurethane foam solution, to lift the sidewalk back to its original position. Next, Dylon and his crew shifted to filling the voids and joints with NexusPro, a silicone-based solution. After the joints and cracks were repaired, the crew cleaned up their materials and left the home. The homeowner was relieved to know their tripping hazard was eliminated. American Waterworks is happy to provide its homeowners with peace of mind.

A homeowner in Jamestown, ND, was driving into their garage when they noticed a major drop. Worried this could cause damage to their car, the homeowner knew they needed to find a permanent solution. Unsure who to work with, the homeowner began looking into “concrete repair near me”. The homeowner compared several companies, and the first one to catch their eye was us, American Waterworks. Impressed with our five-star reviews, the homeowner knew we were the ideal company for their project.  Since they were already on our website, the homeowner decided to sign up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of our Design Specialist, James. A few days later, James traveled home to begin the thorough inspection. First, James introduced himself to the homeowner, then he began the thorough inspection. After he completed his walk-through, James confirmed the sidewalk was sinking and needed to be lifted back into place. James recommended installing PolyLevel to restore the concrete. Knowing this was their best plan of action, the homeowner decided to go ahead with the plans. Next, James sent the plans to our Logistics team, and they built the project. After the Logistics team gave their final stamp of approval, it was assigned to our Foreman, Charlie, and his crew. A few weeks later, Charlie and his team traveled to the home to start the installation. First, Charlie and his team ensured the concrete was ready for the PolyLevel. PolyLevel restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. restores the appearance and safety of the concrete. The crew started by strategically drilling small holes throughout the slab. Then, the crew inserts ports into those small holes. Next, the polyurethane foam is injected beneath the concrete to fill voids and raise the slabs. Finally, the holes and control joints are sealed. Once the PolyLevel was installed, the crew cleaned up their materials and left the home. The homeowner was impressed with the excellent work completed by the crew. If you are noticing a similar issue, sign up for your FREE estimate today!

A homeowner in La Crosse, WI, noticed that his porch and walkway had begun sinking, causing trip hazards to form in some areas. Concerned for his family, he took action by looking into concrete lifting contractors in the area. The homeowner found us and was impressed by our reviews. He then contacted our Appointment Center to schedule his FREE estimate. 

In about a week, our Design Specialist, Will R., arrived at the home to provide a thorough inspection, answer any questions, and provide the best solution for the homeowner. During the inspection, Will informed the homeowner that soil washout is one of the main causes of sinking slabs. Soil washout is the process in which water moves through the ground and washes away the supporting soils, keeping the slabs upright. For this reason, Will recommended our PolyLevel, a modern solution that accurately lifts sinking slabs. PolyLevel is our waterproof foam expanding formula that one injected beneath the slab, expands, filling the voids in the concrete. Alongside PolyLevel, Will also recommended NexusPro, our silicone-based sealant to repair the cracks and seal the joints. The homeowner happily agreed to Will's recommendations and decided to move forward with the project.

In about a month, our Foreman, Jordan S., and his crew arrived at the home for the installation. The crew did not run into any issues, and the install was a complete success!

Now, our customer can have a smooth and level porch and walkway! Have you noticed sinking concrete on your property? Click HERE to schedule your FREE estimate today!

A bank owner in La Crosse, WI, noticed some sinking along the walkway in front of the building. Knowing the importance of curb appeal, the owner began looking into concrete lifting services in La Crosse, WI, and found us. The owner then contacted us to schedule his FREE estimate. 

In less than a week, our Design Specialist, Will R., arrived at the bank to conduct a thorough inspection. During the inspection, he noticed multiple areas had been uneven, causing a few bumps to form. To fix this, Will recommended installing PolyLevel, our elite solution that accurately lifts sunken slabs. PolyLevel is made of a waterproof foam solution that is meant to expand once injected beneath slabs. It is a quick and effective way of lifting concrete slabs without the trouble of mudjacking or slab replacement. The owner happily agreed to Will's recommendation and scheduled the installation date with our Foreman.

In about a month, our Foreman, Sam K., and his crew arrived at the bank for the installation. The crew began by drilling small holes into the concrete slabs. Then, PolyLevel is injected beneath the slab, compacting the soil and lifting the slab. Once the slab has been lifted to the desired height, the crew seals the holes. After they were done with the installation, they cleaned up their equipment and left the home.

Now, our customer can have a smooth walkway! Noticed sinking concrete on your property? Click HERE and schedule your FREE concrete estimate today!