Basement Waterproofing Before & After Photos

Randy, a homeowner in Shevlin, MN, was experiencing water in his basement due to cracked block work. He decided to look around for options on solutions and after his FREE Estimate with our Design Specialist, Richie, headed to the property for an inspection. Richie found that Randy needed solutions that addressed both water and foundation issues. Following the inspection, Richie made his recommendations and answered all questions, and Randy made an appointment to implement solutions.

First, our Foreman Raul and his crew broke out the concrete floor perimeter, forming a trench. In the trench, our team installed our WaterGuard System. Our WaterGuard is a patented below-floor drain that rests in a bed of drainage on top of the foundation footing. It is our most commonly used drain system because of its resistance to water clogs, easy-to-access service ports, and ability to collect leaking water from basement walls.

Next up was our TripleSafe Sump Pump System, which has three levels of protection to solve all water problems a homeowner may experience. Along with the TripleSafe Sump Pump is a battery backup that helps in cases where power is lost in a home, the battery will keep the pumps draining any excess water build-up. Once the job is done, the production team then places a new layer of concrete around the TripleSafe to provide a cleaner and more finished look.

Then, they installed a discharge line from the sump pump to our IceGuard System outside of the home. The IceGuard is a waterproofing system that provides an extra block of protection against basement flooding, especially when freezing temperatures are problematic. 

The team also installed 8 GeoLock Anchors by digging holes outside the home and installing a metal rod in each hole going through the foundation. After installing a metal rod they proceeded to attach one of the GeoLock Anchors to the end of the rod, allowing the wall to be pulled back to its original position.  Over time, these anchors may be tightened to ensure the rods are effective and stabilize the home's structure. After the installation, the production crew backfilled the holes and replaces the soil to its original look.

They then went to work installing our CleanSpace vapor barrier to address water Issues. CleanSpace is a 100% waterproof plastic barrier installed right onto the problem walls, and works to catch water entering the space through cracks and holes in the wall. This also reduces the home's chances of being exposed to radon. The crew also used spray foam to seal and waterproof the homeowner's crawl space. Our spray foam is designed to keep the heat inside and prevent cool air from coming in.

Randy loved the new and improved space and is happy that the foundation of his home is in no longer in any danger!

Jodie S. of Bagley, MN had water leaking throughout her basement, causing him to worry about water moisture, mold build-up, and humidity. She got in contact with American Waterworks and scheduled a FREE Estimate with our Design Specialist, Richie Noreen. Richie went to her home, carefully inspected her water leaks, and came up with a solution that worked for her needs and budget. Jodie felt comfortable with Richie's proposal and got all of her questions answered, so she went ahead with the project and got a date scheduled for the installation. 

Our Foreman, Ryan Loe, and his production crew started the installation by cutting out the concrete floor perimeter, forming a trench. In the trench, our team installed our WaterGuard Drainage System. Our WaterGuard is made to prevent water clogs, serve as an underground drain that connects to the sump pump, and collect leaking water from basement walls. Then, Ryan and his team installed our CleanSpace Wall Vapor Barrier System, which is made to prevent mold and humidity, act as an extra wall protectant, cover any holes or divots, and it gives the space a clean and neat appearance. To complete the installation, our team covered the open floor gaps with river rock and applied new concrete over it, making the basement look neater than when they found it. Jodie was happy with the repairs and had a great experience with our team from the appointment to the installation! 

Are you experiencing water leaking into your basement? Click HERE to schedule your free estimate with one of our Design Specialists! 

Matthew L. of Bagley, MN had water seeping into his basement and had foundation cracks in his exposed basement wall. Our office staff got in contact with him and scheduled a FREE estimate with our Design Specialist, Richie. Richie went to his home and inspected his basement leaks and foundation cracks. Richie proposed our DryTrak Baseboard Drain Pipe for the water leaks and our CarbonArmor Wall Reinforcing System for the foundation cracks. Matthew was confident in both products and their warranties, so he went ahead with the installation. 

Our Foreman, Ryan, and his production crew installed six of our CarbonArmor with epoxy resin. This system is designed to stabilize and strengthen foundation walls and is 10 times stronger than steel. After the installation, it becomes part of the wall structure and can be painted to match the color of the wall. Next, our team installed our DryTrak Baseboard Drain Pipe around the floor perimeter, which collects water from basement walls, stays out of the mud zone, and requires no jackhammering. Since this foundation's floor and footing comes as one piece, DryTrak was the correct interior drainage system to use. Matthew was thrilled with the repairs and had a great experience with our team! 

We don't just provide services in basement waterproofing and foundation repair. We also perform work in crawl space repair/encapsulation, radon testing/mitigation, and concrete repair/lifting. Call us today or click HERE to request and schedule your free estimate! 

A homeowner in Wahpeton, ND, heard an unusual noise coming from their basement. Concerned by this discovery, the homeowner knew they needed to do some additional investigating. After taking a closer look, the homeowner discovered the sound was coming from their sump pump. The homeowner knew this was not a good sign, so they began searching for a solution. After doing some looking, the homeowner came across our impressive sump pump lineup. Since they were already on the website, the homeowner signed up for their FREE estimate. After the appointment was set, we sent out one of our Design Specialists, James, to the home to see the issue. James saw that the sump pump needed to be replaced, so he notified the homeowner of his findings. James suggested installing a new sump pump and additional waterproofing products. After some deliberating, the homeowner agreed. Once they received the stamp of approval, James directed the plans to the office. The office prepared the plans and directed them to the assigned crew. Our Foreman, Kingsley, and his crew were assigned to complete the project. Once they arrived, Kingsley and his crew started by digging a channel and placing the WaterGuard. Once the WaterGuard was in place, the crew placed the SuperSump+ near the new WaterGuard line. Next, the crew attached CleanSpace to the unfinished basement walls. Finally, the crew attached an IceGuard to the outside discharge line. After all the products were installed, the crew cleaned up their materials and left the home. The homeowner was relieved knowing they had the best sump pump in their home. American Waterworks is happy to assist its homeowners with the best waterproofing products. 

A homeowner in Wahpeton, ND, knew it was time to have their basement fully repaired. After seeing the water damage accumulate over the years, the homeowner wanted to solve the issue once and for all. The homeowner was unsure who to work with, so they asked some friends who had the same issues. Their friends raved about American Waterworks and recommended working with us. Trusting their friend's opinion, the homeowner decided to go ahead and work with us. The homeowner went ahead and signed up for their FREE estimate. After the estimate was set, the homeowner awaited the arrival of one of our Design Specialists, Ian. Ian arrived at the home to begin the detailed inspection. During his inspection, Ian discovered several signs of water intrusion. To stop the intrusion from continuing, Ian recommended fully waterproofing the western wall. The homeowner agreed with Ian's recommendations, so he passed the plans onto the office for approval. Once approved by the office, they were sent to our Foreman, Roel, and his crew. Roel and his crew arrived at the home to start the project. First, Roel and his crew began by installing WaterGuard along the western wall. After the WaterGuard was installed, the crew put the new TripleSafe sump pump into place. Once the WaterGuard and TripleSafe systems were tied together, the crew could clean up their materials and leave the home. The homeowner was impressed with the transformation by the crew. American Waterworks is happy to provide its homeowners peace of mind knowing their basement is safe from future water damage.